diff mbox

[v4,1/4] rtc: OMAP: Add system pm_power_off to rtc driver

Message ID 1355464997-19367-2-git-send-email-anilkumar@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

AnilKumar, Chimata Dec. 14, 2012, 6:03 a.m. UTC
From: Colin Foe-Parker <colin.foeparker@logicpd.com>

Add system power off control to rtc driver which is the in-charge
of controlling the BeagleBone system power. The power_off routine
can be hooked up to "pm_power_off" system call.

System power off sequence:-
* Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
* Enable PMIC_POWER_EN in rtc module
* Set rtc ALARM2 time
* Enable ALARM2 interrupt

Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
[anilkumar@ti.com: move poweroff additions to rtc driver]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
 Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
 drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
 2 files changed, 78 insertions(+), 1 deletion(-)

Comments

Russ Dill Jan. 11, 2013, 8:08 a.m. UTC | #1
On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote:
> From: Colin Foe-Parker <colin.foeparker@logicpd.com>
>
> Add system power off control to rtc driver which is the in-charge
> of controlling the BeagleBone system power. The power_off routine
> can be hooked up to "pm_power_off" system call.
>
> System power off sequence:-
> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
> * Enable PMIC_POWER_EN in rtc module
> * Set rtc ALARM2 time
> * Enable ALARM2 interrupt
>
> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
> [anilkumar@ti.com: move poweroff additions to rtc driver]
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>

Looks good

Reviewed-by: Russ Dill <russ.dill@ti.com>
Acked-by: Russ Dill <russ.dill@ti.com>

> ---
>  Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
>  drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
>  2 files changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> index b47aa41..8d9f4f9 100644
> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> @@ -6,6 +6,10 @@ Required properties:
>  - interrupts: rtc timer, alarm interrupts in order
>  - interrupt-parent: phandle for the interrupt controller
>
> +Optional properties:
> +- ti,system-power-controller: Telling whether or not rtc is controlling
> +  the system power.
> +
>  Example:
>
>  rtc@1c23000 {
> @@ -14,4 +18,5 @@ rtc@1c23000 {
>         interrupts = <19
>                       19>;
>         interrupt-parent = <&intc>;
> +       ti,system-power-controller;
>  };
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index 6009714..e6d4878 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -72,6 +72,14 @@
>  #define OMAP_RTC_KICK0_REG             0x6c
>  #define OMAP_RTC_KICK1_REG             0x70
>
> +#define OMAP_RTC_ALARM2_SECONDS_REG    0x80
> +#define OMAP_RTC_ALARM2_MINUTES_REG    0x84
> +#define OMAP_RTC_ALARM2_HOURS_REG      0x88
> +#define OMAP_RTC_ALARM2_DAYS_REG       0x8c
> +#define OMAP_RTC_ALARM2_MONTHS_REG     0x90
> +#define OMAP_RTC_ALARM2_YEARS_REG      0x94
> +#define OMAP_RTC_PMIC_REG              0x98
> +
>  /* OMAP_RTC_CTRL_REG bit fields: */
>  #define OMAP_RTC_CTRL_SPLIT            (1<<7)
>  #define OMAP_RTC_CTRL_DISABLE          (1<<6)
> @@ -93,15 +101,21 @@
>  #define OMAP_RTC_STATUS_BUSY            (1<<0)
>
>  /* OMAP_RTC_INTERRUPTS_REG bit fields: */
> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
>  #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
>  #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
>
> +/* OMAP_RTC_PMIC_REG bit fields: */
> +#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
> +
>  /* OMAP_RTC_KICKER values */
>  #define        KICK0_VALUE                     0x83e70b13
>  #define        KICK1_VALUE                     0x95a4f1e0
>
>  #define        OMAP_RTC_HAS_KICKER             0x1
>
> +#define SHUTDOWN_TIME_SEC              2
> +
>  static void __iomem    *rtc_base;
>
>  #define rtc_read(addr)         readb(rtc_base + (addr))
> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
>         return 0;
>  }
>
> +/*
> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
> + * pmic_pwr_enable control, which can be used to control an external
> + * PMIC.
> + */
> +static void rtc_power_off(void)
> +{
> +       u32 val;
> +       struct rtc_time tm;
> +       unsigned long time;
> +
> +       /* Set PMIC power enable */
> +       val = readl(rtc_base + OMAP_RTC_PMIC_REG);
> +       writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
> +
> +       /* Read rtc time */
> +       omap_rtc_read_time(NULL, &tm);
> +
> +       /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
> +       rtc_tm_to_time(&tm, &time);
> +
> +       /* Add shutdown time to the current value */
> +       time += SHUTDOWN_TIME_SEC;
> +
> +       /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
> +       rtc_time_to_tm(time, &tm);
> +
> +       if (tm2bcd(&tm) < 0)
> +               return;
> +
> +       pr_info("System will go to power_off state in approx. %d secs\n",
> +                       SHUTDOWN_TIME_SEC);
> +
> +       /*
> +        * pmic_pwr_enable is controlled by means of ALARM2 event. So here
> +        * programming alarm2 expiry time and enabling alarm2 interrupt
> +        */
> +       rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
> +       rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
> +       rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
> +       rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
> +       rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
> +       rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
> +
> +       /* Enable alarm2 interrupt */
> +       val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
> +       writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
> +                               rtc_base + OMAP_RTC_INTERRUPTS_REG);
> +}
> +
>  static struct rtc_class_ops omap_rtc_ops = {
>         .read_time      = omap_rtc_read_time,
>         .set_time       = omap_rtc_set_time,
> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>         struct resource         *res, *mem;
>         struct rtc_device       *rtc;
>         u8                      reg, new_ctrl;
> +       bool                    pm_off = false;
>         const struct platform_device_id *id_entry;
>         const struct of_device_id *of_id;
>
>         of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
> -       if (of_id)
> +       if (of_id) {
>                 pdev->id_entry = of_id->data;
> +               pm_off = of_property_read_bool(pdev->dev.of_node,
> +                                       "ti,system-power-controller");
> +       }
>
>         omap_rtc_timer = platform_get_irq(pdev, 0);
>         if (omap_rtc_timer <= 0) {
> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>         platform_set_drvdata(pdev, rtc);
>         dev_set_drvdata(&rtc->dev, mem);
>
> +       /* RTC power off */
> +       if (pm_off && !pm_power_off)
> +               pm_power_off = rtc_power_off;
> +
>         /* clear pending irqs, and set 1/second periodic,
>          * which we'll use instead of update irqs
>          */
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Russ Dill Jan. 11, 2013, 8:54 a.m. UTC | #2
On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote:
> On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote:
>> From: Colin Foe-Parker <colin.foeparker@logicpd.com>
>>
>> Add system power off control to rtc driver which is the in-charge
>> of controlling the BeagleBone system power. The power_off routine
>> can be hooked up to "pm_power_off" system call.
>>
>> System power off sequence:-
>> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
>> * Enable PMIC_POWER_EN in rtc module
>> * Set rtc ALARM2 time
>> * Enable ALARM2 interrupt
>>
>> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
>> [anilkumar@ti.com: move poweroff additions to rtc driver]
>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
>
> Looks good
>
> Reviewed-by: Russ Dill <russ.dill@ti.com>
> Acked-by: Russ Dill <russ.dill@ti.com>

Sorry, actually, small follow up. Is there any reason this uses
readl/writel in some places rather than rtc_read/rtc_write?

>> ---
>>  Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
>>  drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
>>  2 files changed, 78 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> index b47aa41..8d9f4f9 100644
>> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> @@ -6,6 +6,10 @@ Required properties:
>>  - interrupts: rtc timer, alarm interrupts in order
>>  - interrupt-parent: phandle for the interrupt controller
>>
>> +Optional properties:
>> +- ti,system-power-controller: Telling whether or not rtc is controlling
>> +  the system power.
>> +
>>  Example:
>>
>>  rtc@1c23000 {
>> @@ -14,4 +18,5 @@ rtc@1c23000 {
>>         interrupts = <19
>>                       19>;
>>         interrupt-parent = <&intc>;
>> +       ti,system-power-controller;
>>  };
>> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
>> index 6009714..e6d4878 100644
>> --- a/drivers/rtc/rtc-omap.c
>> +++ b/drivers/rtc/rtc-omap.c
>> @@ -72,6 +72,14 @@
>>  #define OMAP_RTC_KICK0_REG             0x6c
>>  #define OMAP_RTC_KICK1_REG             0x70
>>
>> +#define OMAP_RTC_ALARM2_SECONDS_REG    0x80
>> +#define OMAP_RTC_ALARM2_MINUTES_REG    0x84
>> +#define OMAP_RTC_ALARM2_HOURS_REG      0x88
>> +#define OMAP_RTC_ALARM2_DAYS_REG       0x8c
>> +#define OMAP_RTC_ALARM2_MONTHS_REG     0x90
>> +#define OMAP_RTC_ALARM2_YEARS_REG      0x94
>> +#define OMAP_RTC_PMIC_REG              0x98
>> +
>>  /* OMAP_RTC_CTRL_REG bit fields: */
>>  #define OMAP_RTC_CTRL_SPLIT            (1<<7)
>>  #define OMAP_RTC_CTRL_DISABLE          (1<<6)
>> @@ -93,15 +101,21 @@
>>  #define OMAP_RTC_STATUS_BUSY            (1<<0)
>>
>>  /* OMAP_RTC_INTERRUPTS_REG bit fields: */
>> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
>>  #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
>>  #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
>>
>> +/* OMAP_RTC_PMIC_REG bit fields: */
>> +#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
>> +
>>  /* OMAP_RTC_KICKER values */
>>  #define        KICK0_VALUE                     0x83e70b13
>>  #define        KICK1_VALUE                     0x95a4f1e0
>>
>>  #define        OMAP_RTC_HAS_KICKER             0x1
>>
>> +#define SHUTDOWN_TIME_SEC              2
>> +
>>  static void __iomem    *rtc_base;
>>
>>  #define rtc_read(addr)         readb(rtc_base + (addr))
>> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
>>         return 0;
>>  }
>>
>> +/*
>> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
>> + * pmic_pwr_enable control, which can be used to control an external
>> + * PMIC.
>> + */
>> +static void rtc_power_off(void)
>> +{
>> +       u32 val;
>> +       struct rtc_time tm;
>> +       unsigned long time;
>> +
>> +       /* Set PMIC power enable */
>> +       val = readl(rtc_base + OMAP_RTC_PMIC_REG);
>> +       writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
>> +
>> +       /* Read rtc time */
>> +       omap_rtc_read_time(NULL, &tm);
>> +
>> +       /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
>> +       rtc_tm_to_time(&tm, &time);
>> +
>> +       /* Add shutdown time to the current value */
>> +       time += SHUTDOWN_TIME_SEC;
>> +
>> +       /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
>> +       rtc_time_to_tm(time, &tm);
>> +
>> +       if (tm2bcd(&tm) < 0)
>> +               return;
>> +
>> +       pr_info("System will go to power_off state in approx. %d secs\n",
>> +                       SHUTDOWN_TIME_SEC);
>> +
>> +       /*
>> +        * pmic_pwr_enable is controlled by means of ALARM2 event. So here
>> +        * programming alarm2 expiry time and enabling alarm2 interrupt
>> +        */
>> +       rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
>> +       rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
>> +       rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
>> +       rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
>> +       rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
>> +       rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
>> +
>> +       /* Enable alarm2 interrupt */
>> +       val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
>> +       writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
>> +                               rtc_base + OMAP_RTC_INTERRUPTS_REG);
>> +}
>> +
>>  static struct rtc_class_ops omap_rtc_ops = {
>>         .read_time      = omap_rtc_read_time,
>>         .set_time       = omap_rtc_set_time,
>> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>>         struct resource         *res, *mem;
>>         struct rtc_device       *rtc;
>>         u8                      reg, new_ctrl;
>> +       bool                    pm_off = false;
>>         const struct platform_device_id *id_entry;
>>         const struct of_device_id *of_id;
>>
>>         of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
>> -       if (of_id)
>> +       if (of_id) {
>>                 pdev->id_entry = of_id->data;
>> +               pm_off = of_property_read_bool(pdev->dev.of_node,
>> +                                       "ti,system-power-controller");
>> +       }
>>
>>         omap_rtc_timer = platform_get_irq(pdev, 0);
>>         if (omap_rtc_timer <= 0) {
>> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>>         platform_set_drvdata(pdev, rtc);
>>         dev_set_drvdata(&rtc->dev, mem);
>>
>> +       /* RTC power off */
>> +       if (pm_off && !pm_power_off)
>> +               pm_power_off = rtc_power_off;
>> +
>>         /* clear pending irqs, and set 1/second periodic,
>>          * which we'll use instead of update irqs
>>          */
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
AnilKumar, Chimata Jan. 11, 2013, 9:30 a.m. UTC | #3
On Fri, Jan 11, 2013 at 14:24:46, Russ Dill wrote:
> On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote:
> > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote:
> >> From: Colin Foe-Parker <colin.foeparker@logicpd.com>
> >>
> >> Add system power off control to rtc driver which is the in-charge
> >> of controlling the BeagleBone system power. The power_off routine
> >> can be hooked up to "pm_power_off" system call.
> >>
> >> System power off sequence:-
> >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
> >> * Enable PMIC_POWER_EN in rtc module
> >> * Set rtc ALARM2 time
> >> * Enable ALARM2 interrupt
> >>
> >> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
> >> [anilkumar@ti.com: move poweroff additions to rtc driver]
> >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> >
> > Looks good
> >
> > Reviewed-by: Russ Dill <russ.dill@ti.com>
> > Acked-by: Russ Dill <russ.dill@ti.com>
> 
> Sorry, actually, small follow up. Is there any reason this uses
> readl/writel in some places rather than rtc_read/rtc_write?

Hi Russ Dill,

Thanks for the review

At OMAP_RTC_PMIC_POWER_EN_EN, 32-bit value needs to modified so
readl/writel are used. While enabling the INTERRUPTS we can change
it to rtc_read/rtc_write but I am not seeing any advantage if we
do that apart from consistency.

Thanks
AnilKumar

> 
> >> ---
> >>  Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
> >>  drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
> >>  2 files changed, 78 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> index b47aa41..8d9f4f9 100644
> >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> @@ -6,6 +6,10 @@ Required properties:
> >>  - interrupts: rtc timer, alarm interrupts in order
> >>  - interrupt-parent: phandle for the interrupt controller
> >>
> >> +Optional properties:
> >> +- ti,system-power-controller: Telling whether or not rtc is controlling
> >> +  the system power.
> >> +
> >>  Example:
> >>
> >>  rtc@1c23000 {
> >> @@ -14,4 +18,5 @@ rtc@1c23000 {
> >>         interrupts = <19
> >>                       19>;
> >>         interrupt-parent = <&intc>;
> >> +       ti,system-power-controller;
> >>  };
> >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> >> index 6009714..e6d4878 100644
> >> --- a/drivers/rtc/rtc-omap.c
> >> +++ b/drivers/rtc/rtc-omap.c
> >> @@ -72,6 +72,14 @@
> >>  #define OMAP_RTC_KICK0_REG             0x6c
> >>  #define OMAP_RTC_KICK1_REG             0x70
> >>
> >> +#define OMAP_RTC_ALARM2_SECONDS_REG    0x80
> >> +#define OMAP_RTC_ALARM2_MINUTES_REG    0x84
> >> +#define OMAP_RTC_ALARM2_HOURS_REG      0x88
> >> +#define OMAP_RTC_ALARM2_DAYS_REG       0x8c
> >> +#define OMAP_RTC_ALARM2_MONTHS_REG     0x90
> >> +#define OMAP_RTC_ALARM2_YEARS_REG      0x94
> >> +#define OMAP_RTC_PMIC_REG              0x98
> >> +
> >>  /* OMAP_RTC_CTRL_REG bit fields: */
> >>  #define OMAP_RTC_CTRL_SPLIT            (1<<7)
> >>  #define OMAP_RTC_CTRL_DISABLE          (1<<6)
> >> @@ -93,15 +101,21 @@
> >>  #define OMAP_RTC_STATUS_BUSY            (1<<0)
> >>
> >>  /* OMAP_RTC_INTERRUPTS_REG bit fields: */
> >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
> >>  #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
> >>  #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
> >>
> >> +/* OMAP_RTC_PMIC_REG bit fields: */
> >> +#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
> >> +
> >>  /* OMAP_RTC_KICKER values */
> >>  #define        KICK0_VALUE                     0x83e70b13
> >>  #define        KICK1_VALUE                     0x95a4f1e0
> >>
> >>  #define        OMAP_RTC_HAS_KICKER             0x1
> >>
> >> +#define SHUTDOWN_TIME_SEC              2
> >> +
> >>  static void __iomem    *rtc_base;
> >>
> >>  #define rtc_read(addr)         readb(rtc_base + (addr))
> >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
> >>         return 0;
> >>  }
> >>
> >> +/*
> >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
> >> + * pmic_pwr_enable control, which can be used to control an external
> >> + * PMIC.
> >> + */
> >> +static void rtc_power_off(void)
> >> +{
> >> +       u32 val;
> >> +       struct rtc_time tm;
> >> +       unsigned long time;
> >> +
> >> +       /* Set PMIC power enable */
> >> +       val = readl(rtc_base + OMAP_RTC_PMIC_REG);
> >> +       writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
> >> +
> >> +       /* Read rtc time */
> >> +       omap_rtc_read_time(NULL, &tm);
> >> +
> >> +       /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
> >> +       rtc_tm_to_time(&tm, &time);
> >> +
> >> +       /* Add shutdown time to the current value */
> >> +       time += SHUTDOWN_TIME_SEC;
> >> +
> >> +       /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
> >> +       rtc_time_to_tm(time, &tm);
> >> +
> >> +       if (tm2bcd(&tm) < 0)
> >> +               return;
> >> +
> >> +       pr_info("System will go to power_off state in approx. %d secs\n",
> >> +                       SHUTDOWN_TIME_SEC);
> >> +
> >> +       /*
> >> +        * pmic_pwr_enable is controlled by means of ALARM2 event. So here
> >> +        * programming alarm2 expiry time and enabling alarm2 interrupt
> >> +        */
> >> +       rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
> >> +       rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
> >> +       rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
> >> +       rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
> >> +       rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
> >> +       rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
> >> +
> >> +       /* Enable alarm2 interrupt */
> >> +       val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
> >> +       writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
> >> +                               rtc_base + OMAP_RTC_INTERRUPTS_REG);
> >> +}
> >> +
> >>  static struct rtc_class_ops omap_rtc_ops = {
> >>         .read_time      = omap_rtc_read_time,
> >>         .set_time       = omap_rtc_set_time,
> >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> >>         struct resource         *res, *mem;
> >>         struct rtc_device       *rtc;
> >>         u8                      reg, new_ctrl;
> >> +       bool                    pm_off = false;
> >>         const struct platform_device_id *id_entry;
> >>         const struct of_device_id *of_id;
> >>
> >>         of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
> >> -       if (of_id)
> >> +       if (of_id) {
> >>                 pdev->id_entry = of_id->data;
> >> +               pm_off = of_property_read_bool(pdev->dev.of_node,
> >> +                                       "ti,system-power-controller");
> >> +       }
> >>
> >>         omap_rtc_timer = platform_get_irq(pdev, 0);
> >>         if (omap_rtc_timer <= 0) {
> >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> >>         platform_set_drvdata(pdev, rtc);
> >>         dev_set_drvdata(&rtc->dev, mem);
> >>
> >> +       /* RTC power off */
> >> +       if (pm_off && !pm_power_off)
> >> +               pm_power_off = rtc_power_off;
> >> +
> >>         /* clear pending irqs, and set 1/second periodic,
> >>          * which we'll use instead of update irqs
> >>          */
> >> --
> >> 1.7.9.5
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
AnilKumar, Chimata Jan. 11, 2013, 9:55 a.m. UTC | #4
On Fri, Jan 11, 2013 at 15:00:03, AnilKumar, Chimata wrote:
> On Fri, Jan 11, 2013 at 14:24:46, Russ Dill wrote:
> > On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote:
> > > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote:
> > >> From: Colin Foe-Parker <colin.foeparker@logicpd.com>
> > >>
> > >> Add system power off control to rtc driver which is the in-charge
> > >> of controlling the BeagleBone system power. The power_off routine
> > >> can be hooked up to "pm_power_off" system call.
> > >>
> > >> System power off sequence:-
> > >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
> > >> * Enable PMIC_POWER_EN in rtc module
> > >> * Set rtc ALARM2 time
> > >> * Enable ALARM2 interrupt
> > >>
> > >> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
> > >> [anilkumar@ti.com: move poweroff additions to rtc driver]
> > >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> > >
> > > Looks good
> > >
> > > Reviewed-by: Russ Dill <russ.dill@ti.com>
> > > Acked-by: Russ Dill <russ.dill@ti.com>
> > 
> > Sorry, actually, small follow up. Is there any reason this uses
> > readl/writel in some places rather than rtc_read/rtc_write?
> 
> Hi Russ Dill,
> 
> Thanks for the review
> 
> At OMAP_RTC_PMIC_POWER_EN_EN, 32-bit value needs to modified so
> readl/writel are used. While enabling the INTERRUPTS we can change
> it to rtc_read/rtc_write but I am not seeing any advantage if we
> do that apart from consistency.
 
And driver has to clean-up properly to make use of rtc_read/write
APIs with proper read/write's based on the memory type. Ideally
rtc_readb/w/l and rtc_writeb/w/l should go way from the driver.
This clean-up can be done while converting the driver with platform
specific rtc_read/write.

Thanks
AnilKumar

> > >> ---
> > >>  Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
> > >>  drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
> > >>  2 files changed, 78 insertions(+), 1 deletion(-)
> > >>
> > >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > >> index b47aa41..8d9f4f9 100644
> > >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > >> @@ -6,6 +6,10 @@ Required properties:
> > >>  - interrupts: rtc timer, alarm interrupts in order
> > >>  - interrupt-parent: phandle for the interrupt controller
> > >>
> > >> +Optional properties:
> > >> +- ti,system-power-controller: Telling whether or not rtc is controlling
> > >> +  the system power.
> > >> +
> > >>  Example:
> > >>
> > >>  rtc@1c23000 {
> > >> @@ -14,4 +18,5 @@ rtc@1c23000 {
> > >>         interrupts = <19
> > >>                       19>;
> > >>         interrupt-parent = <&intc>;
> > >> +       ti,system-power-controller;
> > >>  };
> > >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> > >> index 6009714..e6d4878 100644
> > >> --- a/drivers/rtc/rtc-omap.c
> > >> +++ b/drivers/rtc/rtc-omap.c
> > >> @@ -72,6 +72,14 @@
> > >>  #define OMAP_RTC_KICK0_REG             0x6c
> > >>  #define OMAP_RTC_KICK1_REG             0x70
> > >>
> > >> +#define OMAP_RTC_ALARM2_SECONDS_REG    0x80
> > >> +#define OMAP_RTC_ALARM2_MINUTES_REG    0x84
> > >> +#define OMAP_RTC_ALARM2_HOURS_REG      0x88
> > >> +#define OMAP_RTC_ALARM2_DAYS_REG       0x8c
> > >> +#define OMAP_RTC_ALARM2_MONTHS_REG     0x90
> > >> +#define OMAP_RTC_ALARM2_YEARS_REG      0x94
> > >> +#define OMAP_RTC_PMIC_REG              0x98
> > >> +
> > >>  /* OMAP_RTC_CTRL_REG bit fields: */
> > >>  #define OMAP_RTC_CTRL_SPLIT            (1<<7)
> > >>  #define OMAP_RTC_CTRL_DISABLE          (1<<6)
> > >> @@ -93,15 +101,21 @@
> > >>  #define OMAP_RTC_STATUS_BUSY            (1<<0)
> > >>
> > >>  /* OMAP_RTC_INTERRUPTS_REG bit fields: */
> > >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
> > >>  #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
> > >>  #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
> > >>
> > >> +/* OMAP_RTC_PMIC_REG bit fields: */
> > >> +#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
> > >> +
> > >>  /* OMAP_RTC_KICKER values */
> > >>  #define        KICK0_VALUE                     0x83e70b13
> > >>  #define        KICK1_VALUE                     0x95a4f1e0
> > >>
> > >>  #define        OMAP_RTC_HAS_KICKER             0x1
> > >>
> > >> +#define SHUTDOWN_TIME_SEC              2
> > >> +
> > >>  static void __iomem    *rtc_base;
> > >>
> > >>  #define rtc_read(addr)         readb(rtc_base + (addr))
> > >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
> > >>         return 0;
> > >>  }
> > >>
> > >> +/*
> > >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
> > >> + * pmic_pwr_enable control, which can be used to control an external
> > >> + * PMIC.
> > >> + */
> > >> +static void rtc_power_off(void)
> > >> +{
> > >> +       u32 val;
> > >> +       struct rtc_time tm;
> > >> +       unsigned long time;
> > >> +
> > >> +       /* Set PMIC power enable */
> > >> +       val = readl(rtc_base + OMAP_RTC_PMIC_REG);
> > >> +       writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
> > >> +
> > >> +       /* Read rtc time */
> > >> +       omap_rtc_read_time(NULL, &tm);
> > >> +
> > >> +       /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
> > >> +       rtc_tm_to_time(&tm, &time);
> > >> +
> > >> +       /* Add shutdown time to the current value */
> > >> +       time += SHUTDOWN_TIME_SEC;
> > >> +
> > >> +       /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
> > >> +       rtc_time_to_tm(time, &tm);
> > >> +
> > >> +       if (tm2bcd(&tm) < 0)
> > >> +               return;
> > >> +
> > >> +       pr_info("System will go to power_off state in approx. %d secs\n",
> > >> +                       SHUTDOWN_TIME_SEC);
> > >> +
> > >> +       /*
> > >> +        * pmic_pwr_enable is controlled by means of ALARM2 event. So here
> > >> +        * programming alarm2 expiry time and enabling alarm2 interrupt
> > >> +        */
> > >> +       rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
> > >> +       rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
> > >> +       rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
> > >> +       rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
> > >> +       rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
> > >> +       rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
> > >> +
> > >> +       /* Enable alarm2 interrupt */
> > >> +       val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
> > >> +       writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
> > >> +                               rtc_base + OMAP_RTC_INTERRUPTS_REG);
> > >> +}
> > >> +
> > >>  static struct rtc_class_ops omap_rtc_ops = {
> > >>         .read_time      = omap_rtc_read_time,
> > >>         .set_time       = omap_rtc_set_time,
> > >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> > >>         struct resource         *res, *mem;
> > >>         struct rtc_device       *rtc;
> > >>         u8                      reg, new_ctrl;
> > >> +       bool                    pm_off = false;
> > >>         const struct platform_device_id *id_entry;
> > >>         const struct of_device_id *of_id;
> > >>
> > >>         of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
> > >> -       if (of_id)
> > >> +       if (of_id) {
> > >>                 pdev->id_entry = of_id->data;
> > >> +               pm_off = of_property_read_bool(pdev->dev.of_node,
> > >> +                                       "ti,system-power-controller");
> > >> +       }
> > >>
> > >>         omap_rtc_timer = platform_get_irq(pdev, 0);
> > >>         if (omap_rtc_timer <= 0) {
> > >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> > >>         platform_set_drvdata(pdev, rtc);
> > >>         dev_set_drvdata(&rtc->dev, mem);
> > >>
> > >> +       /* RTC power off */
> > >> +       if (pm_off && !pm_power_off)
> > >> +               pm_power_off = rtc_power_off;
> > >> +
> > >>         /* clear pending irqs, and set 1/second periodic,
> > >>          * which we'll use instead of update irqs
> > >>          */
> > >> --
> > >> 1.7.9.5
> > >>
> > >> --
> > >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > >> the body of a message to majordomo@vger.kernel.org
> > >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index b47aa41..8d9f4f9 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -6,6 +6,10 @@  Required properties:
 - interrupts: rtc timer, alarm interrupts in order
 - interrupt-parent: phandle for the interrupt controller
 
+Optional properties:
+- ti,system-power-controller: Telling whether or not rtc is controlling
+  the system power.
+
 Example:
 
 rtc@1c23000 {
@@ -14,4 +18,5 @@  rtc@1c23000 {
 	interrupts = <19
 		      19>;
 	interrupt-parent = <&intc>;
+	ti,system-power-controller;
 };
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 6009714..e6d4878 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -72,6 +72,14 @@ 
 #define OMAP_RTC_KICK0_REG		0x6c
 #define OMAP_RTC_KICK1_REG		0x70
 
+#define OMAP_RTC_ALARM2_SECONDS_REG	0x80
+#define OMAP_RTC_ALARM2_MINUTES_REG	0x84
+#define OMAP_RTC_ALARM2_HOURS_REG	0x88
+#define OMAP_RTC_ALARM2_DAYS_REG	0x8c
+#define OMAP_RTC_ALARM2_MONTHS_REG	0x90
+#define OMAP_RTC_ALARM2_YEARS_REG	0x94
+#define OMAP_RTC_PMIC_REG		0x98
+
 /* OMAP_RTC_CTRL_REG bit fields: */
 #define OMAP_RTC_CTRL_SPLIT		(1<<7)
 #define OMAP_RTC_CTRL_DISABLE		(1<<6)
@@ -93,15 +101,21 @@ 
 #define OMAP_RTC_STATUS_BUSY            (1<<0)
 
 /* OMAP_RTC_INTERRUPTS_REG bit fields: */
+#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
 #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
 #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
 
+/* OMAP_RTC_PMIC_REG bit fields: */
+#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
+
 /* OMAP_RTC_KICKER values */
 #define	KICK0_VALUE			0x83e70b13
 #define	KICK1_VALUE			0x95a4f1e0
 
 #define	OMAP_RTC_HAS_KICKER		0x1
 
+#define SHUTDOWN_TIME_SEC		2
+
 static void __iomem	*rtc_base;
 
 #define rtc_read(addr)		readb(rtc_base + (addr))
@@ -290,6 +304,56 @@  static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	return 0;
 }
 
+/*
+ * rtc_power_off: Set the pmic power off sequence. The RTC generates
+ * pmic_pwr_enable control, which can be used to control an external
+ * PMIC.
+ */
+static void rtc_power_off(void)
+{
+	u32 val;
+	struct rtc_time tm;
+	unsigned long time;
+
+	/* Set PMIC power enable */
+	val = readl(rtc_base + OMAP_RTC_PMIC_REG);
+	writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
+
+	/* Read rtc time */
+	omap_rtc_read_time(NULL, &tm);
+
+	/* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
+	rtc_tm_to_time(&tm, &time);
+
+	/* Add shutdown time to the current value */
+	time += SHUTDOWN_TIME_SEC;
+
+	/* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
+	rtc_time_to_tm(time, &tm);
+
+	if (tm2bcd(&tm) < 0)
+		return;
+
+	pr_info("System will go to power_off state in approx. %d secs\n",
+			SHUTDOWN_TIME_SEC);
+
+	/*
+	 * pmic_pwr_enable is controlled by means of ALARM2 event. So here
+	 * programming alarm2 expiry time and enabling alarm2 interrupt
+	 */
+	rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
+	rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
+	rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
+	rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
+	rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
+	rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
+
+	/* Enable alarm2 interrupt */
+	val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
+	writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
+				rtc_base + OMAP_RTC_INTERRUPTS_REG);
+}
+
 static struct rtc_class_ops omap_rtc_ops = {
 	.read_time	= omap_rtc_read_time,
 	.set_time	= omap_rtc_set_time,
@@ -327,12 +391,16 @@  static int __init omap_rtc_probe(struct platform_device *pdev)
 	struct resource		*res, *mem;
 	struct rtc_device	*rtc;
 	u8			reg, new_ctrl;
+	bool			pm_off = false;
 	const struct platform_device_id *id_entry;
 	const struct of_device_id *of_id;
 
 	of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
-	if (of_id)
+	if (of_id) {
 		pdev->id_entry = of_id->data;
+		pm_off = of_property_read_bool(pdev->dev.of_node,
+					"ti,system-power-controller");
+	}
 
 	omap_rtc_timer = platform_get_irq(pdev, 0);
 	if (omap_rtc_timer <= 0) {
@@ -385,6 +453,10 @@  static int __init omap_rtc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, rtc);
 	dev_set_drvdata(&rtc->dev, mem);
 
+	/* RTC power off */
+	if (pm_off && !pm_power_off)
+		pm_power_off = rtc_power_off;
+
 	/* clear pending irqs, and set 1/second periodic,
 	 * which we'll use instead of update irqs
 	 */