| Message ID | 1356959231-17335-3-git-send-email-vaibhav.bedia@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Monday 31 December 2012 06:36 PM, Vaibhav Bedia wrote: > On AM33XX, the mailbox module between the MPU and the > WKUP-M3 co-processor facilitates a one-way communication. > MPU uses the assigned mailbox sub-module to issue the > interrupt to the WKUP-M3 co-processor which then goes > and reads the the IPC data from registers in the control > module. > > WKUP-M3 is in the L4_WKUP and does not have any access to > the mailbox module. Due to this limitation, the MPU is > completely responsible for FIFO maintenance and interrupt > generation. MPU needs to ensure that the FIFO does not > overflow by reading back the assigned mailbox sub-module. > > This patch adds an API in the mailbox code which the MPU > can use to empty the FIFO by issuing a readback command. > > Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > --- > Note: This patch which will be slightly reworked once the mailbox > driver changes are finalized. > Can you expand a bit please ? > drivers/mailbox/mailbox-omap2.c | 19 +++++++++++++++++++ > drivers/mailbox/mailbox.c | 36 ++++++++++++++++++++++++++++++++++++ > drivers/mailbox/mailbox.h | 3 +++ > include/linux/mailbox.h | 1 + > 4 files changed, 59 insertions(+), 0 deletions(-) > > diff --git a/drivers/mailbox/mailbox-omap2.c b/drivers/mailbox/mailbox-omap2.c > index 6d61159..c732be1 100644 > --- a/drivers/mailbox/mailbox-omap2.c > +++ b/drivers/mailbox/mailbox-omap2.c > @@ -125,6 +125,23 @@ static int omap2_mbox_fifo_full(struct mailbox *mbox) > return mbox_read_reg(fifo->fifo_stat); > } > > +static int omap2_mbox_fifo_needs_flush(struct mailbox *mbox) > +{ > + struct omap_mbox2_priv *p = mbox->priv; > + struct omap_mbox2_fifo *fifo = &p->tx_fifo; > + > + return mbox_read_reg(fifo->msg_stat); > +} > + > +static void omap2_mbox_fifo_readback(struct mailbox *mbox, > + struct mailbox_msg *msg) > +{ > + struct omap_mbox2_priv *p = mbox->priv; > + struct omap_mbox2_fifo *fifo = &p->tx_fifo; > + > + msg->header = mbox_read_reg(fifo->msg); > +} > + > static int ompa2_mbox_poll_for_space(struct mailbox *mbox) > { > if (omap2_mbox_fifo_full(mbox)) > @@ -221,6 +238,8 @@ static struct mailbox_ops omap2_mbox_ops = { > .read = omap2_mbox_fifo_read, > .write = omap2_mbox_fifo_write, > .empty = omap2_mbox_fifo_empty, > + .fifo_needs_flush = omap2_mbox_fifo_needs_flush, > + .fifo_readback = omap2_mbox_fifo_readback, > .poll_for_space = ompa2_mbox_poll_for_space, > .enable_irq = omap2_mbox_enable_irq, > .disable_irq = omap2_mbox_disable_irq, > diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c > index 2f50226..92c9f68 100644 > --- a/drivers/mailbox/mailbox.c > +++ b/drivers/mailbox/mailbox.c > @@ -57,6 +57,15 @@ static inline int mbox_empty(struct mailbox *mbox) > { > return mbox->ops->empty(mbox); > } > +static inline int mbox_fifo_needs_flush(struct mailbox *mbox) > +{ > + return mbox->ops->fifo_needs_flush(mbox); > +} > +static inline void mbox_fifo_readback(struct mailbox *mbox, > + struct mailbox_msg *msg) > +{ > + mbox->ops->fifo_readback(mbox, msg); > +} > > /* Mailbox IRQ handle functions */ > static inline void ack_mbox_irq(struct mailbox *mbox, mailbox_irq_t irq) > @@ -110,6 +119,33 @@ out: > } > EXPORT_SYMBOL(mailbox_msg_send); > > +/* s/*/** > + * Flush the Rx FIFO by reading back the messages > + * Since the normal expectation is that the Rx will do the > + * reading, add a debug message to indicate if we really flush > + * > + * Returns the no. of messages read back > + */ Just look at the kernel doc style for above Rest looks fine. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 08, 2013 at 19:26:51, Shilimkar, Santosh wrote: > On Monday 31 December 2012 06:36 PM, Vaibhav Bedia wrote: > > On AM33XX, the mailbox module between the MPU and the > > WKUP-M3 co-processor facilitates a one-way communication. > > MPU uses the assigned mailbox sub-module to issue the > > interrupt to the WKUP-M3 co-processor which then goes > > and reads the the IPC data from registers in the control > > module. > > > > WKUP-M3 is in the L4_WKUP and does not have any access to > > the mailbox module. Due to this limitation, the MPU is > > completely responsible for FIFO maintenance and interrupt > > generation. MPU needs to ensure that the FIFO does not > > overflow by reading back the assigned mailbox sub-module. > > > > This patch adds an API in the mailbox code which the MPU > > can use to empty the FIFO by issuing a readback command. > > > > Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> > > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > > --- > > Note: This patch which will be slightly reworked once the mailbox > > driver changes are finalized. > > > Can you expand a bit please ? There could be some changes in the structure names. > > > drivers/mailbox/mailbox-omap2.c | 19 +++++++++++++++++++ > > drivers/mailbox/mailbox.c | 36 ++++++++++++++++++++++++++++++++++++ > > drivers/mailbox/mailbox.h | 3 +++ > > include/linux/mailbox.h | 1 + > > 4 files changed, 59 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/mailbox/mailbox-omap2.c b/drivers/mailbox/mailbox-omap2.c > > index 6d61159..c732be1 100644 > > --- a/drivers/mailbox/mailbox-omap2.c > > +++ b/drivers/mailbox/mailbox-omap2.c > > @@ -125,6 +125,23 @@ static int omap2_mbox_fifo_full(struct mailbox *mbox) > > return mbox_read_reg(fifo->fifo_stat); > > } > > > > +static int omap2_mbox_fifo_needs_flush(struct mailbox *mbox) > > +{ > > + struct omap_mbox2_priv *p = mbox->priv; > > + struct omap_mbox2_fifo *fifo = &p->tx_fifo; > > + > > + return mbox_read_reg(fifo->msg_stat); > > +} > > + > > +static void omap2_mbox_fifo_readback(struct mailbox *mbox, > > + struct mailbox_msg *msg) > > +{ > > + struct omap_mbox2_priv *p = mbox->priv; > > + struct omap_mbox2_fifo *fifo = &p->tx_fifo; > > + > > + msg->header = mbox_read_reg(fifo->msg); > > +} > > + > > static int ompa2_mbox_poll_for_space(struct mailbox *mbox) > > { > > if (omap2_mbox_fifo_full(mbox)) > > @@ -221,6 +238,8 @@ static struct mailbox_ops omap2_mbox_ops = { > > .read = omap2_mbox_fifo_read, > > .write = omap2_mbox_fifo_write, > > .empty = omap2_mbox_fifo_empty, > > + .fifo_needs_flush = omap2_mbox_fifo_needs_flush, > > + .fifo_readback = omap2_mbox_fifo_readback, > > .poll_for_space = ompa2_mbox_poll_for_space, > > .enable_irq = omap2_mbox_enable_irq, > > .disable_irq = omap2_mbox_disable_irq, > > diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c > > index 2f50226..92c9f68 100644 > > --- a/drivers/mailbox/mailbox.c > > +++ b/drivers/mailbox/mailbox.c > > @@ -57,6 +57,15 @@ static inline int mbox_empty(struct mailbox *mbox) > > { > > return mbox->ops->empty(mbox); > > } > > +static inline int mbox_fifo_needs_flush(struct mailbox *mbox) > > +{ > > + return mbox->ops->fifo_needs_flush(mbox); > > +} > > +static inline void mbox_fifo_readback(struct mailbox *mbox, > > + struct mailbox_msg *msg) > > +{ > > + mbox->ops->fifo_readback(mbox, msg); > > +} > > > > /* Mailbox IRQ handle functions */ > > static inline void ack_mbox_irq(struct mailbox *mbox, mailbox_irq_t irq) > > @@ -110,6 +119,33 @@ out: > > } > > EXPORT_SYMBOL(mailbox_msg_send); > > > > +/* > s/*/** Will do. > > + * Flush the Rx FIFO by reading back the messages > > + * Since the normal expectation is that the Rx will do the > > + * reading, add a debug message to indicate if we really flush > > + * > > + * Returns the no. of messages read back > > + */ > Just look at the kernel doc style for above > > Rest looks fine. > Ok. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mailbox/mailbox-omap2.c b/drivers/mailbox/mailbox-omap2.c index 6d61159..c732be1 100644 --- a/drivers/mailbox/mailbox-omap2.c +++ b/drivers/mailbox/mailbox-omap2.c @@ -125,6 +125,23 @@ static int omap2_mbox_fifo_full(struct mailbox *mbox) return mbox_read_reg(fifo->fifo_stat); } +static int omap2_mbox_fifo_needs_flush(struct mailbox *mbox) +{ + struct omap_mbox2_priv *p = mbox->priv; + struct omap_mbox2_fifo *fifo = &p->tx_fifo; + + return mbox_read_reg(fifo->msg_stat); +} + +static void omap2_mbox_fifo_readback(struct mailbox *mbox, + struct mailbox_msg *msg) +{ + struct omap_mbox2_priv *p = mbox->priv; + struct omap_mbox2_fifo *fifo = &p->tx_fifo; + + msg->header = mbox_read_reg(fifo->msg); +} + static int ompa2_mbox_poll_for_space(struct mailbox *mbox) { if (omap2_mbox_fifo_full(mbox)) @@ -221,6 +238,8 @@ static struct mailbox_ops omap2_mbox_ops = { .read = omap2_mbox_fifo_read, .write = omap2_mbox_fifo_write, .empty = omap2_mbox_fifo_empty, + .fifo_needs_flush = omap2_mbox_fifo_needs_flush, + .fifo_readback = omap2_mbox_fifo_readback, .poll_for_space = ompa2_mbox_poll_for_space, .enable_irq = omap2_mbox_enable_irq, .disable_irq = omap2_mbox_disable_irq, diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c index 2f50226..92c9f68 100644 --- a/drivers/mailbox/mailbox.c +++ b/drivers/mailbox/mailbox.c @@ -57,6 +57,15 @@ static inline int mbox_empty(struct mailbox *mbox) { return mbox->ops->empty(mbox); } +static inline int mbox_fifo_needs_flush(struct mailbox *mbox) +{ + return mbox->ops->fifo_needs_flush(mbox); +} +static inline void mbox_fifo_readback(struct mailbox *mbox, + struct mailbox_msg *msg) +{ + mbox->ops->fifo_readback(mbox, msg); +} /* Mailbox IRQ handle functions */ static inline void ack_mbox_irq(struct mailbox *mbox, mailbox_irq_t irq) @@ -110,6 +119,33 @@ out: } EXPORT_SYMBOL(mailbox_msg_send); +/* + * Flush the Rx FIFO by reading back the messages + * Since the normal expectation is that the Rx will do the + * reading, add a debug message to indicate if we really flush + * + * Returns the no. of messages read back + */ +int mailbox_rx_flush(struct mailbox *mbox) +{ + int ret = 0; + struct mailbox_msg readback_msg; + + while (mbox_fifo_needs_flush(mbox)) { + mbox_fifo_readback(mbox, &readback_msg); + ret++; + } + + if (ret) { + /* no more messages in the fifo. clear IRQ source. */ + ack_mbox_irq(mbox, IRQ_RX); + pr_debug("Flushed %s Rx FIFO by reading back\n", mbox->name); + } + + return ret; +} +EXPORT_SYMBOL(mailbox_rx_flush); + #define TRANSFER_TIMEOUT 30000 /* Becomes ~3s timeout */ static struct mailbox_msg no_irq_msg_res; diff --git a/drivers/mailbox/mailbox.h b/drivers/mailbox/mailbox.h index f103194..b841ae1 100644 --- a/drivers/mailbox/mailbox.h +++ b/drivers/mailbox/mailbox.h @@ -24,6 +24,9 @@ struct mailbox_ops { int (*write)(struct mailbox *mbox, struct mailbox_msg *msg); int (*empty)(struct mailbox *mbox); int (*poll_for_space)(struct mailbox *mbox); + int (*fifo_needs_flush)(struct mailbox *mbox); + void (*fifo_readback)(struct mailbox *mbox, + struct mailbox_msg *msg); /* irq */ void (*enable_irq)(struct mailbox *mbox, mailbox_irq_t irq); diff --git a/include/linux/mailbox.h b/include/linux/mailbox.h index 3f9ec1e..705def9 100644 --- a/include/linux/mailbox.h +++ b/include/linux/mailbox.h @@ -22,6 +22,7 @@ struct mailbox_msg { #define MAILBOX_FILL_HEADER_MSG(_msg, _header) \ MAILBOX_FILL_MSG(_msg, _header, NULL, 0); +int mailbox_rx_flush(struct mailbox *); int mailbox_msg_send(struct mailbox *, struct mailbox_msg *msg); struct mailbox_msg *mailbox_msg_send_receive_no_irq(struct mailbox *, struct mailbox_msg *msg);
On AM33XX, the mailbox module between the MPU and the WKUP-M3 co-processor facilitates a one-way communication. MPU uses the assigned mailbox sub-module to issue the interrupt to the WKUP-M3 co-processor which then goes and reads the the IPC data from registers in the control module. WKUP-M3 is in the L4_WKUP and does not have any access to the mailbox module. Due to this limitation, the MPU is completely responsible for FIFO maintenance and interrupt generation. MPU needs to ensure that the FIFO does not overflow by reading back the assigned mailbox sub-module. This patch adds an API in the mailbox code which the MPU can use to empty the FIFO by issuing a readback command. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> --- Note: This patch which will be slightly reworked once the mailbox driver changes are finalized. drivers/mailbox/mailbox-omap2.c | 19 +++++++++++++++++++ drivers/mailbox/mailbox.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/mailbox/mailbox.h | 3 +++ include/linux/mailbox.h | 1 + 4 files changed, 59 insertions(+), 0 deletions(-)