From patchwork Tue Jan 15 08:42:55 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1975891 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id 9A5663FE33 for ; Tue, 15 Jan 2013 08:46:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757126Ab3AOIqO (ORCPT ); Tue, 15 Jan 2013 03:46:14 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:45623 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756445Ab3AOInf (ORCPT ); Tue, 15 Jan 2013 03:43:35 -0500 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id r0F8hI28014828; Tue, 15 Jan 2013 02:43:19 -0600 Received: from DBDE71.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id r0F8hBrc023741; Tue, 15 Jan 2013 14:13:18 +0530 (IST) Received: from dbdp32.itg.ti.com (172.24.170.251) by DBDE71.ent.ti.com (172.24.170.149) with Microsoft SMTP Server id 14.1.323.3; Tue, 15 Jan 2013 14:13:12 +0530 Received: from a0393678lt.apr.dhcp.ti.com (smtpvbd.itg.ti.com [172.24.170.250]) by dbdp32.itg.ti.com (8.13.8/8.13.8) with ESMTP id r0F8h1uP008885; Tue, 15 Jan 2013 14:13:11 +0530 From: Kishon Vijay Abraham I To: , , , , , , , , , , , , , CC: Kishon Vijay Abraham I Subject: [RFC PATCH 4/7] drivers: usb: start using the control module driver Date: Tue, 15 Jan 2013 14:12:55 +0530 Message-ID: <1358239378-10030-5-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1358239378-10030-1-git-send-email-kishon@ti.com> References: <1358239378-10030-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Start using the control module driver for powering on the PHY and for writing to the mailbox instead of writing to the control module registers on their own. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/usb/omap-usb.txt | 4 ++ Documentation/devicetree/bindings/usb/usb-phy.txt | 7 +-- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 ---- drivers/usb/musb/Kconfig | 1 + drivers/usb/musb/omap2430.c | 64 ++++++++------------ drivers/usb/musb/omap2430.h | 9 --- drivers/usb/phy/Kconfig | 1 + drivers/usb/phy/omap-usb2.c | 38 +++--------- include/linux/usb/omap_usb.h | 4 +- 9 files changed, 42 insertions(+), 99 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index d58dae3..3f0152b 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -3,6 +3,9 @@ OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS OMAP MUSB GLUE - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb" - ti,hwmods : must be "usb_otg_hs" + - ti,has_mailbox : to specify that omap uses an external mailbox + (in control module) to communicate with the musb core during device connect + and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - num_eps : Specifies the number of endpoints. This is also a @@ -20,6 +23,7 @@ SOC specific device node entry usb_otg_hs: usb_otg_hs@4a0ab000 { compatible = "ti,omap4-musb"; ti,hwmods = "usb_otg_hs"; + ti,has_mailbox; multipoint = <1>; num_eps = <16>; ram_bits = <12>; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt index 80d4148..ee14cb7 100644 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -4,14 +4,11 @@ OMAP USB2 PHY Required properties: - compatible: Should be "ti,omap-usb2" - - reg : Address and length of the register set for the device. Also -add the address of control module dev conf register until a driver for -control module is added + - reg : Address and length of the register set for the device. This is usually a subnode of ocp2scp to which it is connected. usb2phy@4a0ad080 { compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>, - <0x4a002300 0x4>; + reg = <0x4a0ad080 0x58>; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 129d508..103f4ba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2698,13 +2698,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = { .end = 0x4a0ae000, .flags = IORESOURCE_MEM, }, - { - /* XXX: Remove this once control module driver is in place */ - .name = "ctrl_dev", - .start = 0x4a002300, - .end = 0x4a002303, - .flags = IORESOURCE_MEM, - }, { } }; @@ -6152,12 +6145,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { .pa_end = 0x4a0ab7ff, .flags = ADDR_TYPE_RT }, - { - /* XXX: Remove this once control module driver is in place */ - .pa_start = 0x4a00233c, - .pa_end = 0x4a00233f, - .flags = ADDR_TYPE_RT - }, { } }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 23a0b7f..de6e5ce 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA + select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS help Say Y here if your system has a dual role high speed USB diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index da00af4..3e7ceef 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "musb_core.h" #include "omap2430.h" @@ -46,7 +47,7 @@ struct omap2430_glue { struct platform_device *musb; enum omap_musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; - u32 __iomem *control_otghs; + struct device *control_otghs; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -54,26 +55,6 @@ struct omap2430_glue *_glue; static struct timer_list musb_idle_timer; -/** - * omap4_usb_phy_mailbox - write to usb otg mailbox - * @glue: struct omap2430_glue * - * @val: the value to be written to the mailbox - * - * On detection of a device (ID pin is grounded), this API should be called - * to set AVALID, VBUSVALID and ID pin is grounded. - * - * When OMAP is connected to a host (OMAP in device mode), this API - * is called to set AVALID, VBUSVALID and ID pin in high impedance. - * - * XXX: This function will be removed once we have a seperate driver for - * control module - */ -static void omap4_usb_phy_mailbox(struct omap2430_glue *glue, u32 val) -{ - if (glue->control_otghs) - writel(val, glue->control_otghs); -} - static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; @@ -269,7 +250,6 @@ EXPORT_SYMBOL_GPL(omap_musb_mailbox); static void omap_musb_set_mailbox(struct omap2430_glue *glue) { - u32 val; struct musb *musb = glue_to_musb(glue); struct device *dev = musb->controller; struct musb_hdrc_platform_data *pdata = dev->platform_data; @@ -285,8 +265,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { pm_runtime_get_sync(dev); - val = AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_host_mode(glue->control_otghs); omap2430_musb_set_vbus(musb, 1); } break; @@ -299,8 +279,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) pm_runtime_get_sync(dev); - val = IDDIG | AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_device_mode(glue->control_otghs); break; case OMAP_MUSB_ID_FLOAT: @@ -317,8 +297,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) if (musb->xceiv->otg->set_vbus) otg_set_vbus(musb->xceiv->otg, 0); } - val = SESSEND | IDDIG; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_set_sessionend(glue->control_otghs); break; default: dev_dbg(dev, "ID float\n"); @@ -415,7 +395,6 @@ err1: static void omap2430_musb_enable(struct musb *musb) { u8 devctl; - u32 val; unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); @@ -425,8 +404,8 @@ static void omap2430_musb_enable(struct musb *musb) switch (glue->status) { case OMAP_MUSB_ID_GROUND: - val = AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_host_mode(glue->control_otghs); if (data->interface_type != MUSB_INTERFACE_UTMI) break; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -445,8 +424,8 @@ static void omap2430_musb_enable(struct musb *musb) break; case OMAP_MUSB_VBUS_VALID: - val = IDDIG | AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_device_mode(glue->control_otghs); break; default: @@ -456,13 +435,12 @@ static void omap2430_musb_enable(struct musb *musb) static void omap2430_musb_disable(struct musb *musb) { - u32 val; struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); if (glue->status != OMAP_MUSB_UNKNOWN) { - val = SESSEND | IDDIG; - omap4_usb_phy_mailbox(glue, val); + if (!IS_ERR(glue->control_otghs)) + omap_control_usb_set_sessionend(glue->control_otghs); } } @@ -523,9 +501,6 @@ static int omap2430_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - glue->control_otghs = devm_request_and_ioremap(&pdev->dev, res); - if (glue->control_otghs == NULL) - dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); if (np) { pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); @@ -558,11 +533,22 @@ static int omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); + pdata->has_mailbox = of_property_read_bool(np, + "ti,has_mailbox"); pdata->board_data = data; pdata->config = config; } + if (pdata->has_mailbox) { + glue->control_otghs = get_omap_control_dev(); + if (IS_ERR(glue->control_otghs)) { + dev_vdbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; + } + } else { + glue->control_otghs = ERR_PTR(-ENODEV); + } pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 8ef6566..1b5e83a 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -49,13 +49,4 @@ #define OTG_FORCESTDBY 0x414 # define ENABLEFORCE (1 << 0) -/* - * Control Module bit definitions - * XXX: Will be removed once we have a driver for control module. - */ -#define AVALID BIT(0) -#define BVALID BIT(1) -#define VBUSVALID BIT(2) -#define SESSEND BIT(3) -#define IDDIG BIT(4) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index a7277ee..16bdaca 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -8,6 +8,7 @@ config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS select USB_OTG_UTILS + select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c index 26ae8f4..2152ce4 100644 --- a/drivers/usb/phy/omap-usb2.c +++ b/drivers/usb/phy/omap-usb2.c @@ -27,6 +27,7 @@ #include #include #include +#include /** * omap_usb2_set_comparator - links the comparator present in the sytem with @@ -52,29 +53,6 @@ int omap_usb2_set_comparator(struct phy_companion *comparator) } EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); -/** - * omap_usb_phy_power - power on/off the phy using control module reg - * @phy: struct omap_usb * - * @on: 0 or 1, based on powering on or off the PHY - * - * XXX: Remove this function once control module driver gets merged - */ -static void omap_usb_phy_power(struct omap_usb *phy, int on) -{ - u32 val; - - if (on) { - val = readl(phy->control_dev); - if (val & PHY_PD) { - writel(~PHY_PD, phy->control_dev); - /* XXX: add proper documentation for this delay */ - mdelay(200); - } - } else { - writel(PHY_PD, phy->control_dev); - } -} - static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) { struct omap_usb *phy = phy_to_omapusb(otg->phy); @@ -124,7 +102,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend) struct omap_usb *phy = phy_to_omapusb(x); if (suspend && !phy->is_suspended) { - omap_usb_phy_power(phy, 0); + omap_control_usb_phy_power(phy->control_dev, 0); pm_runtime_put_sync(phy->dev); phy->is_suspended = 1; } else if (!suspend && phy->is_suspended) { @@ -134,7 +112,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend) ret); return ret; } - omap_usb_phy_power(phy, 1); + omap_control_usb_phy_power(phy->control_dev, 1); phy->is_suspended = 0; } @@ -168,14 +146,14 @@ static int omap_usb2_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); - if (phy->control_dev == NULL) { - dev_err(&pdev->dev, "Failed to obtain io memory\n"); - return -ENXIO; + phy->control_dev = get_omap_control_dev(); + if (IS_ERR(phy->control_dev)) { + dev_dbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; } phy->is_suspended = 1; - omap_usb_phy_power(phy, 0); + omap_control_usb_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h index 0ea17f8..3db9b53 100644 --- a/include/linux/usb/omap_usb.h +++ b/include/linux/usb/omap_usb.h @@ -25,13 +25,11 @@ struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; struct device *dev; - u32 __iomem *control_dev; + struct device *control_dev; struct clk *wkupclk; u8 is_suspended:1; }; -#define PHY_PD 0x1 - #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)