new file mode 100644
@@ -0,0 +1,59 @@
+Device-Tree bindings for tilcdc DRM generic panel output driver
+
+Required properties:
+ - compatible: value should be "tilcdc,panel".
+ - panel-info: configuration info to configure LCDC correctly for the panel
+ - ac-bias: AC Bias Pin Frequency
+ - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
+ - dma-burst-sz: DMA burst size
+ - bpp: Bits per pixel
+ - fdd: FIFO DMA Request Delay
+ - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+ - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+ - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+ - fifo-th: DMA FIFO threshold
+ - display-timings: typical videomode of lcd panel. Multiple video modes
+ can be listed if the panel supports multiple timings, but the 'native-mode'
+ should be the preferred/default resolution. Refer to
+ Documentation/devicetree/bindings/video/display-timing.txt for display
+ timing binding details.
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+ muxing properly for pins that connect to TFP410 device
+
+Example:
+
+ /* Settings for CDTech_S035Q01 / LCD3 cape: */
+ lcd3 {
+ compatible = "tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 320x240 {
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <21>;
+ hfront-porch = <58>;
+ hsync-len = <47>;
+ vback-porch = <11>;
+ vfront-porch = <23>;
+ vsync-len = <2>;
+ clock-frequency = <8000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
@@ -4,6 +4,9 @@ config DRM_TILCDC
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
+ select OF_VIDEOMODE
+ select OF_DISPLAY_TIMING
+ select BACKLIGHT_CLASS_DEVICE
help
Choose this option if you have an TI SoC with LCDC display
controller, for example AM33xx in beagle-bone, DA8xx, or
@@ -4,6 +4,7 @@ tilcdc-y := \
tilcdc_crtc.o \
tilcdc_tfp410.o \
tilcdc_slave.o \
+ tilcdc_panel.o \
tilcdc_drv.o
obj-$(CONFIG_DRM_TILCDC) += tilcdc.o
@@ -21,6 +21,7 @@
#include "tilcdc_regs.h"
#include "tilcdc_tfp410.h"
#include "tilcdc_slave.h"
+#include "tilcdc_panel.h"
#include "drm_fb_helper.h"
@@ -589,6 +590,7 @@ static int __init tilcdc_drm_init(void)
DBG("init");
tilcdc_tfp410_init();
tilcdc_slave_init();
+ tilcdc_panel_init();
return platform_driver_register(&tilcdc_platform_driver);
}
@@ -597,6 +599,7 @@ static void __exit tilcdc_drm_fini(void)
DBG("fini");
tilcdc_tfp410_fini();
tilcdc_slave_fini();
+ tilcdc_panel_fini();
platform_driver_unregister(&tilcdc_platform_driver);
}
new file mode 100644
@@ -0,0 +1,436 @@
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/backlight.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#include "tilcdc_drv.h"
+
+struct panel_module {
+ struct tilcdc_module base;
+ struct tilcdc_panel_info *info;
+ struct display_timings *timings;
+ struct backlight_device *backlight;
+};
+#define to_panel_module(x) container_of(x, struct panel_module, base)
+
+
+/*
+ * Encoder:
+ */
+
+struct panel_encoder {
+ struct drm_encoder base;
+ struct panel_module *mod;
+};
+#define to_panel_encoder(x) container_of(x, struct panel_encoder, base)
+
+
+static void panel_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ drm_encoder_cleanup(encoder);
+ kfree(panel_encoder);
+}
+
+static void panel_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ struct backlight_device *backlight = panel_encoder->mod->backlight;
+
+ if (!backlight)
+ return;
+
+ backlight->props.power = mode == DRM_MODE_DPMS_ON
+ ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+ backlight_update_status(backlight);
+}
+
+static bool panel_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* nothing needed */
+ return true;
+}
+
+static void panel_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+ tilcdc_crtc_set_panel_info(encoder->crtc, panel_encoder->mod->info);
+}
+
+static void panel_encoder_commit(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static void panel_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* nothing needed */
+}
+
+static const struct drm_encoder_funcs panel_encoder_funcs = {
+ .destroy = panel_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
+ .dpms = panel_encoder_dpms,
+ .mode_fixup = panel_encoder_mode_fixup,
+ .prepare = panel_encoder_prepare,
+ .commit = panel_encoder_commit,
+ .mode_set = panel_encoder_mode_set,
+};
+
+static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
+ struct panel_module *mod)
+{
+ struct panel_encoder *panel_encoder;
+ struct drm_encoder *encoder;
+ int ret;
+
+ panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL);
+ if (!panel_encoder) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_encoder->mod = mod;
+
+ encoder = &panel_encoder->base;
+ encoder->possible_crtcs = 1;
+
+ ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
+ DRM_MODE_ENCODER_LVDS);
+ if (ret < 0)
+ goto fail;
+
+ drm_encoder_helper_add(encoder, &panel_encoder_helper_funcs);
+
+ return encoder;
+
+fail:
+ panel_encoder_destroy(encoder);
+ return NULL;
+}
+
+/*
+ * Connector:
+ */
+
+struct panel_connector {
+ struct drm_connector base;
+
+ struct drm_encoder *encoder; /* our connected encoder */
+ struct panel_module *mod;
+};
+#define to_panel_connector(x) container_of(x, struct panel_connector, base)
+
+
+static void panel_connector_destroy(struct drm_connector *connector)
+{
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ drm_connector_cleanup(connector);
+ kfree(panel_connector);
+}
+
+static enum drm_connector_status panel_connector_detect(
+ struct drm_connector *connector,
+ bool force)
+{
+ return connector_status_connected;
+}
+
+static int panel_connector_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ struct display_timings *timings = panel_connector->mod->timings;
+ int i;
+
+ for (i = 0; i < timings->num_timings; i++) {
+ struct drm_display_mode *mode = drm_mode_create(dev);
+ struct videomode vm;
+
+ if (videomode_from_timing(timings, &vm, i))
+ break;
+
+ drm_display_mode_from_videomode(&vm, mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+
+ if (timings->native_mode == i)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return i;
+}
+
+static int panel_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct tilcdc_drm_private *priv = connector->dev->dev_private;
+ /* our only constraints are what the crtc can generate: */
+ return tilcdc_crtc_mode_valid(priv->crtc, mode);
+}
+
+static struct drm_encoder *panel_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ return panel_connector->encoder;
+}
+
+static const struct drm_connector_funcs panel_connector_funcs = {
+ .destroy = panel_connector_destroy,
+ .dpms = drm_helper_connector_dpms,
+ .detect = panel_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs panel_connector_helper_funcs = {
+ .get_modes = panel_connector_get_modes,
+ .mode_valid = panel_connector_mode_valid,
+ .best_encoder = panel_connector_best_encoder,
+};
+
+static struct drm_connector *panel_connector_create(struct drm_device *dev,
+ struct panel_module *mod, struct drm_encoder *encoder)
+{
+ struct panel_connector *panel_connector;
+ struct drm_connector *connector;
+ int ret;
+
+ panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL);
+ if (!panel_connector) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_connector->encoder = encoder;
+ panel_connector->mod = mod;
+
+ connector = &panel_connector->base;
+
+ drm_connector_init(dev, connector, &panel_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ drm_connector_helper_add(connector, &panel_connector_helper_funcs);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ ret = drm_mode_connector_attach_encoder(connector, encoder);
+ if (ret)
+ goto fail;
+
+ drm_sysfs_connector_add(connector);
+
+ return connector;
+
+fail:
+ panel_connector_destroy(connector);
+ return NULL;
+}
+
+/*
+ * Module:
+ */
+
+static int panel_modeset_init(struct tilcdc_module *mod, struct drm_device *dev)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+ struct tilcdc_drm_private *priv = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ encoder = panel_encoder_create(dev, panel_mod);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = panel_connector_create(dev, panel_mod, encoder);
+ if (!connector)
+ return -ENOMEM;
+
+ priv->encoders[priv->num_encoders++] = encoder;
+ priv->connectors[priv->num_connectors++] = connector;
+
+ return 0;
+}
+
+static void panel_destroy(struct tilcdc_module *mod)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+
+ if (panel_mod->timings) {
+ display_timings_release(panel_mod->timings);
+ kfree(panel_mod->timings);
+ }
+
+ tilcdc_module_cleanup(mod);
+ kfree(panel_mod->info);
+ kfree(panel_mod);
+}
+
+static const struct tilcdc_module_ops panel_module_ops = {
+ .modeset_init = panel_modeset_init,
+ .destroy = panel_destroy,
+};
+
+/*
+ * Device:
+ */
+
+/* maybe move this somewhere common if it is needed by other outputs? */
+static struct tilcdc_panel_info * of_get_panel_info(struct device_node *np)
+{
+ struct device_node *info_np;
+ struct tilcdc_panel_info *info;
+ int ret = 0;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return NULL;
+ }
+
+ info_np = of_get_child_by_name(np, "panel-info");
+ if (!info_np) {
+ pr_err("%s: could not find panel-info node\n", __func__);
+ return NULL;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ pr_err("%s: allocation failed\n", __func__);
+ return NULL;
+ }
+
+ ret |= of_property_read_u32(info_np, "ac-bias", &info->ac_bias);
+ ret |= of_property_read_u32(info_np, "ac-bias-intrpt", &info->ac_bias_intrpt);
+ ret |= of_property_read_u32(info_np, "dma-burst-sz", &info->dma_burst_sz);
+ ret |= of_property_read_u32(info_np, "bpp", &info->bpp);
+ ret |= of_property_read_u32(info_np, "fdd", &info->fdd);
+ ret |= of_property_read_u32(info_np, "sync-edge", &info->sync_edge);
+ ret |= of_property_read_u32(info_np, "sync-ctrl", &info->sync_ctrl);
+ ret |= of_property_read_u32(info_np, "raster-order", &info->raster_order);
+ ret |= of_property_read_u32(info_np, "fifo-th", &info->fifo_th);
+
+ /* optional: */
+ info->tft_alt_mode = of_property_read_bool(info_np, "tft-alt-mode");
+ info->invert_pxl_clk = of_property_read_bool(info_np, "invert-pxl-clk");
+
+ if (ret) {
+ pr_err("%s: error reading panel-info properties\n", __func__);
+ kfree(info);
+ return NULL;
+ }
+
+ return info;
+}
+
+static struct of_device_id panel_of_match[];
+
+static int panel_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_module *panel_mod;
+ struct tilcdc_module *mod;
+ struct pinctrl *pinctrl;
+ int ret = -EINVAL;
+
+
+ /* bail out early if no DT data: */
+ if (!node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+
+ panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
+ if (!panel_mod)
+ return -ENOMEM;
+
+ mod = &panel_mod->base;
+
+ tilcdc_module_init(mod, "panel", &panel_module_ops);
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "pins are not configured\n");
+
+
+ panel_mod->timings = of_get_display_timings(node);
+ if (!panel_mod->timings) {
+ dev_err(&pdev->dev, "could not get panel timings\n");
+ goto fail;
+ }
+
+ panel_mod->info = of_get_panel_info(node);
+ if (!panel_mod->info) {
+ dev_err(&pdev->dev, "could not get panel info\n");
+ goto fail;
+ }
+
+ panel_mod->backlight = of_find_backlight_by_node(node);
+ if (panel_mod->backlight)
+ dev_info(&pdev->dev, "found backlight\n");
+
+ return 0;
+
+fail:
+ panel_destroy(mod);
+ return ret;
+}
+
+static int panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct of_device_id panel_of_match[] = {
+ { .compatible = "tilcdc,panel", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, panel_of_match);
+
+struct platform_driver panel_driver = {
+ .probe = panel_probe,
+ .remove = panel_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "panel",
+ .of_match_table = panel_of_match,
+ },
+};
+
+int __init tilcdc_panel_init(void)
+{
+ return platform_driver_register(&panel_driver);
+}
+
+void __exit tilcdc_panel_fini(void)
+{
+ platform_driver_unregister(&panel_driver);
+}
new file mode 100644
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TILCDC_PANEL_H__
+#define __TILCDC_PANEL_H__
+
+/* sub-module for generic lcd panel output */
+
+int tilcdc_panel_init(void);
+void tilcdc_panel_fini(void);
+
+#endif /* __TILCDC_PANEL_H__ */
Add an output panel driver for LCD panels. Tested with LCD3 cape on beaglebone. v1: original v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis Antoniou v3: add backlight support v4: rebase to latest of video timing helpers v5: remove some unneeded fields from panel-info struct, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> --- .../devicetree/bindings/drm/tilcdc/panel.txt | 59 +++ drivers/gpu/drm/tilcdc/Kconfig | 3 + drivers/gpu/drm/tilcdc/Makefile | 1 + drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 + drivers/gpu/drm/tilcdc/tilcdc_panel.c | 436 +++++++++++++++++++++ drivers/gpu/drm/tilcdc/tilcdc_panel.h | 26 ++ 6 files changed, 528 insertions(+) create mode 100644 Documentation/devicetree/bindings/drm/tilcdc/panel.txt create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_panel.c create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_panel.h