diff mbox

[8/8] ARM: dts: OMAP5: Add ocp address space for all hwmods

Message ID 1361374735-22018-9-git-send-email-santosh.shilimkar@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Santosh Shilimkar Feb. 20, 2013, 3:38 p.m. UTC
Patch adds the OCP address space for all missing hwmod from existing
DT file. Note that the compatible isn't added by purpose to ensure that for
these hwmod, devices are not getting created.

Cc: Benoit Cousson <b-cousson@ti.com>

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |  238 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 238 insertions(+)

Comments

Benoit Cousson Feb. 25, 2013, 10:56 a.m. UTC | #1
Hi Santosh,


On 02/20/2013 04:38 PM, Santosh Shilimkar wrote:
> Patch adds the OCP address space for all missing hwmod from existing
> DT file. Note that the compatible isn't added by purpose to ensure that for
> these hwmod, devices are not getting created.

Mmm, that will make the DTS a little bit weird and non-standard.
You'd better use the status=disabled flag for that.

> Cc: Benoit Cousson <b-cousson@ti.com>
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/boot/dts/omap5.dtsi |  238 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 238 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 269a328..915fd11 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -500,5 +500,243 @@
>  			hw-caps-ll-interface;
>  			hw-caps-temp-alert;
>  		};
> +
> +		l4_emif_ocp_fw: l4_emif_ocp_fw@4a20c000 {
> +			reg = <0x4a20c000 0x100>;
> +			ti,hwmods = "emif_ocp_fw";
> +		};

Are we doing anything useful with this entry, and potentially all the
other non-regular entries like that.

> +
> +		mpu_l3_main_1: mpu_l3_main_1@44000000 {
> +			reg = <0x44000000 0x2000>;
> +			ti,hwmods = "l3_main_1";
> +		};
> +
> +		mpu_l3_main_2: mpu_l3_main_2@44800000 {
> +			reg = <0x44800000 0x3000>;
> +			ti,hwmods = "l3_main_2";
> +		};
> +
> +		mpu_l3_main_3: mpu_l3_main_3@45000000 {
> +			reg = <0x44800000 0x4000>;
> +			ti,hwmods = "l3_main_3";
> +		};

The slit is due to PM partitioning, but that should be represented as an
unique device.

> +
> +		l4_ocp_wp_noc: l4_ocp_wp_noc@4a102000 {
> +			reg = <0x44800000 0x80>;
> +			ti,hwmods = "ocp_wp_noc";
> +		};
> +
> +		abe_aess: abe_aess@401f1000 {
> +			reg = <0x44800000 0x400>;
> +			ti,hwmods = "aess";
> +		};
> +
> +		c2c: c2c@5c000000 {
> +			reg = <0x5c000000 0x100>;
> +			ti,hwmods = "c2c";
> +		};
> +
> +		ctrl_module_core: ctrl_module_core@4a002000 {
> +			reg = <0x4a002000 0x800>,
> +			      <0x4a002800 0x1000>;
> +			ti,hwmods = "ctrl_module_core";
> +		};
> +
> +		ctrl_module_wkup: ctrl_module_wkup@4a002000 {
> +			reg = <0x4ae0c000 0x800>,
> +			      <0x4ae0c800 0x800>;
> +			ti,hwmods = "ctrl_module_wkup";
> +		};

Should probably be one device as well.

> +
> +		dss: dss@58000000 {
> +			reg = <0x58000000 0x80>;
> +			ti,hwmods = "dss_core";
> +		};
> +
> +		dss_dispc: dss_dispc@58001000 {
> +			reg = <0x58001000 0x1000>;
> +			ti,hwmods = "dss_dispc";
> +		};
> +
> +		dss_dsi1_a: dss_dsi1_a@58004000 {
> +			reg = <0x58004000 0x200>;
> +			ti,hwmods = "dss_dsi1_a";
> +		};
> +
> +		dss_dsi1_b: dss_dsi1_b@58005000 {
> +			reg = <0x58005000 0x200>;
> +			ti,hwmods = "dss_dsi1_b";
> +		};
> +
> +		dss_dsi1_c: dss_dsi1_c@58009000 {
> +			reg = <0x58009000 0x200>;
> +			ti,hwmods = "dss_dsi1_c";
> +		};
> +
> +		dss_hdmi: dss_hdmi@58060000 {
> +			reg = <0x58060000 0x19000>;
> +			ti,hwmods = "dss_hdmi";
> +		};
> +
> +		dss_rfbi: dss_rfbi@580020000 {
> +			reg = <0x58002000 0x100>;
> +			ti,hwmods = "dss_rfbi";
> +		};

For the DSS, you do have to respect the HW hierarchy. hwmod was flat,
and it was the source of a lot of PM dependency issue.

> +
> +		elm: elm@48078000 {
> +			reg = <0x48078000 0x1000>;
> +			ti,hwmods = "elm";
> +		};
> +
> +		fdif: elm@4a10a000 {
> +			reg = <0x4a10a000 0x200>;
> +			ti,hwmods = "fdif";
> +		};

Same issue than DSS. FDIF, ISS are somehow related.

> +
> +		gpmc: gpmc@50000000 {
> +			reg = <0x50000000 0x400>;
> +			ti,hwmods = "gpmc";
> +		};
> +
> +		gpu: gpu@5600fe00 {
> +			reg = <0x5600fe00 0x2000>;
> +			ti,hwmods = "gpu";
> +		};
> +
> +
> +		hdq1w: hdq1w@480b2000 {
> +			reg = <0x480b2000 0x20>;
> +			ti,hwmods = "hdq1w";
> +		};
> +
> +		hsi: hsi@4a05a000 {
> +			reg = <0x4a05a000 0x2000>;
> +			ti,hwmods = "hsi";
> +		};
> +
> +		ipu: ipu@55082000 {
> +			reg = <0x55082000 0x100>;
> +			ti,hwmods = "ipu";
> +		};
> +
> +		intc_ipu_c0: intc_ipu_c0@48211000 {
> +			reg = <0x48211000 0x2000>;
> +			ti,hwmods = "intc_ipu_c0";
> +		};
> +
> +		intc_ipu_c1: intc_ipu_c1@48211000 {
> +			reg = <0x48211000 0x2000>;
> +			ti,hwmods = "intc_ipu_c1";
> +		};

Do we need such entries?

> +
> +		mmu_ipu: mmu_ipu@55080800 {
> +			reg = <0x55080800 0x1000>;
> +			ti,hwmods = "mmu_ipu";
> +		};
> +
> +		iss: iss@52000000 {
> +			reg = <0x52000000 0x20>;
> +			ti,hwmods = "iss";
> +		};
> +
> +		iva: iva@5a05a400 {
> +			reg = <0x5a05a400 0x80>;
> +			ti,hwmods = "iva";
> +		};
> +
> +		mailbox: mailbox@4a0f4000 {
> +			reg = <0x4a0f4000 0x200>;
> +			ti,hwmods = "mailbox";
> +		};
> +
> +		mcasp: mcasp@40128000 {
> +			reg = <0x40128000 0x400>;
> +			ti,hwmods = "mcasp";
> +		};
> +
> +		mcspi1: mcspi1@48098000 {
> +			reg = <0x48098000 0x200>;
> +			ti,hwmods = "mcspi1";
> +		};
> +
> +		mcspi2: mcspi2@4809a000 {
> +			reg = <0x4809a000 0x200>;
> +			ti,hwmods = "mcspi2";
> +		};
> +
> +		mcspi3: mcspi3@480b8000 {
> +			reg = <0x480b8000 0x200>;
> +			ti,hwmods = "mcspi3";
> +		};
> +
> +		mcspi4: mcspi4@480ba000 {
> +			reg = <0x480ba000 0x200>;
> +			ti,hwmods = "mcspi4";
> +		};
> +
> +		ocp2scp1: ocp2scp1@4a080000 {
> +			reg = <0x4a080000 0x20>;
> +			ti,hwmods = "ocp2scp1";
> +		};
> +
> +		sata: sata@4a141100 {
> +			reg = <0x4a141100 0x08>;
> +			ti,hwmods = "sata";
> +		};
> +
> +		scrm: scrm@4ae0a000 {
> +			reg = <0x4ae0a000 0x800>;
> +			ti,hwmods = "scrm";
> +		};
> +
> +		slimbus1: slimbus1@4012c000 {
> +			reg = <0x4012c000 0x400>;
> +			ti,hwmods = "slimbus1";
> +		};
> +
> +		smartreflex_core: smartreflex_core@4a0dd000 {
> +			reg = <0x4a0dd000 0x40>;
> +			ti,hwmods = "smartreflex_core";
> +		};
> +
> +		smartreflex_mm: smartreflex_mm@4a0db000 {
> +			reg = <0x4a0db000 0x40>;
> +			ti,hwmods = "smartreflex_mm";
> +		};
> +
> +		smartreflex_mpu: smartreflex_mpu@4a0d9000 {
> +			reg = <0x4a0d9000 0x40>;
> +			ti,hwmods = "smartreflex_mpu";
> +		};
> +
> +		spinlock: spinlock@4a0f6000 {
> +			reg = <0x4a0f6000 0x1000>;
> +			ti,hwmods = "spinlock";
> +		};
> +
> +		usb_host_hs: usb_host_hs@4a064c00 {
> +			reg = <0x4a064c00 0x100>;
> +			ti,hwmods = "usb_host_hs";
> +		};
> +
> +		usb_otg_ss: usb_otg_ss@4a030000 {
> +			reg = <0x4a030000 0x100>;
> +			ti,hwmods = "usb_otg_ss";
> +		};
> +
> +		usb_tll_hs: usb_tll_hs@4a062800 {
> +			reg = <0x4a062800 0x400>;
> +			ti,hwmods = "usb_tll_hs";
> +		};
> +
> +		wd_timer2: wd_timer2@4ae14000 {
> +			reg = <0x4ae14000 0x80>;
> +			ti,hwmods = "wd_timer2";
> +		};
> +
> +		wd_timer3: wd_timer3@40130000 {
> +			reg = <0x40130000 0x80>;
> +			ti,hwmods = "wd_timer3";
> +		};

In case of real device and existing binding, you must populate every
entries (IRQ, DMA...).

Regards,
Benoit


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Santosh Shilimkar Feb. 25, 2013, 11:16 a.m. UTC | #2
On Monday 25 February 2013 04:26 PM, Benoit Cousson wrote:
> Hi Santosh,
>
>
> On 02/20/2013 04:38 PM, Santosh Shilimkar wrote:
>> Patch adds the OCP address space for all missing hwmod from existing
>> DT file. Note that the compatible isn't added by purpose to ensure that for
>> these hwmod, devices are not getting created.
>
> Mmm, that will make the DTS a little bit weird and non-standard.
> You'd better use the status=disabled flag for that.
>
IIRC, we thought about it and then decided against it. I expect that
when a real device support get added the drivers will add compatible
information and also update the node with rest of the data.

>> Cc: Benoit Cousson <b-cousson@ti.com>
>>
>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> ---
>>   arch/arm/boot/dts/omap5.dtsi |  238 ++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 238 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index 269a328..915fd11 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -500,5 +500,243 @@
>>   			hw-caps-ll-interface;
>>   			hw-caps-temp-alert;
>>   		};
>> +
>> +		l4_emif_ocp_fw: l4_emif_ocp_fw@4a20c000 {
>> +			reg = <0x4a20c000 0x100>;
>> +			ti,hwmods = "emif_ocp_fw";
>> +		};
>
> Are we doing anything useful with this entry, and potentially all the
> other non-regular entries like that.
>
Mostly not. Some of the entries did gave me trouble for the boot and
hence I retained as it is in hwmod. I will make another pass to see
if we can remove them.

>> +
>> +		mpu_l3_main_1: mpu_l3_main_1@44000000 {
>> +			reg = <0x44000000 0x2000>;
>> +			ti,hwmods = "l3_main_1";
>> +		};
>> +
>> +		mpu_l3_main_2: mpu_l3_main_2@44800000 {
>> +			reg = <0x44800000 0x3000>;
>> +			ti,hwmods = "l3_main_2";
>> +		};
>> +
>> +		mpu_l3_main_3: mpu_l3_main_3@45000000 {
>> +			reg = <0x44800000 0x4000>;
>> +			ti,hwmods = "l3_main_3";
>> +		};
>
> The slit is due to PM partitioning, but that should be represented as an
> unique device.
>
Can be done

>> +
>> +		l4_ocp_wp_noc: l4_ocp_wp_noc@4a102000 {
>> +			reg = <0x44800000 0x80>;
>> +			ti,hwmods = "ocp_wp_noc";
>> +		};
>> +
>> +		abe_aess: abe_aess@401f1000 {
>> +			reg = <0x44800000 0x400>;
>> +			ti,hwmods = "aess";
>> +		};
>> +
>> +		c2c: c2c@5c000000 {
>> +			reg = <0x5c000000 0x100>;
>> +			ti,hwmods = "c2c";
>> +		};
>> +
>> +		ctrl_module_core: ctrl_module_core@4a002000 {
>> +			reg = <0x4a002000 0x800>,
>> +			      <0x4a002800 0x1000>;
>> +			ti,hwmods = "ctrl_module_core";
>> +		};
>> +
>> +		ctrl_module_wkup: ctrl_module_wkup@4a002000 {
>> +			reg = <0x4ae0c000 0x800>,
>> +			      <0x4ae0c800 0x800>;
>> +			ti,hwmods = "ctrl_module_wkup";
>> +		};
>
> Should probably be one device as well.
>
ok

>> +
>> +		dss: dss@58000000 {
>> +			reg = <0x58000000 0x80>;
>> +			ti,hwmods = "dss_core";
>> +		};
>> +
>> +		dss_dispc: dss_dispc@58001000 {
>> +			reg = <0x58001000 0x1000>;
>> +			ti,hwmods = "dss_dispc";
>> +		};
>> +
>> +		dss_dsi1_a: dss_dsi1_a@58004000 {
>> +			reg = <0x58004000 0x200>;
>> +			ti,hwmods = "dss_dsi1_a";
>> +		};
>> +
>> +		dss_dsi1_b: dss_dsi1_b@58005000 {
>> +			reg = <0x58005000 0x200>;
>> +			ti,hwmods = "dss_dsi1_b";
>> +		};
>> +
>> +		dss_dsi1_c: dss_dsi1_c@58009000 {
>> +			reg = <0x58009000 0x200>;
>> +			ti,hwmods = "dss_dsi1_c";
>> +		};
>> +
>> +		dss_hdmi: dss_hdmi@58060000 {
>> +			reg = <0x58060000 0x19000>;
>> +			ti,hwmods = "dss_hdmi";
>> +		};
>> +
>> +		dss_rfbi: dss_rfbi@580020000 {
>> +			reg = <0x58002000 0x100>;
>> +			ti,hwmods = "dss_rfbi";
>> +		};
>
> For the DSS, you do have to respect the HW hierarchy. hwmod was flat,
> and it was the source of a lot of PM dependency issue.
>
I can update this but as I said, it is best to be left fro driver
owners since they know the IP and hierarchy best.


>> +
>> +		elm: elm@48078000 {
>> +			reg = <0x48078000 0x1000>;
>> +			ti,hwmods = "elm";
>> +		};
>> +
>> +		fdif: elm@4a10a000 {
>> +			reg = <0x4a10a000 0x200>;
>> +			ti,hwmods = "fdif";
>> +		};
>
> Same issue than DSS. FDIF, ISS are somehow related.
>
>> +
>> +		gpmc: gpmc@50000000 {
>> +			reg = <0x50000000 0x400>;
>> +			ti,hwmods = "gpmc";
>> +		};
>> +
>> +		gpu: gpu@5600fe00 {
>> +			reg = <0x5600fe00 0x2000>;
>> +			ti,hwmods = "gpu";
>> +		};
>> +
>> +
>> +		hdq1w: hdq1w@480b2000 {
>> +			reg = <0x480b2000 0x20>;
>> +			ti,hwmods = "hdq1w";
>> +		};
>> +
>> +		hsi: hsi@4a05a000 {
>> +			reg = <0x4a05a000 0x2000>;
>> +			ti,hwmods = "hsi";
>> +		};
>> +
>> +		ipu: ipu@55082000 {
>> +			reg = <0x55082000 0x100>;
>> +			ti,hwmods = "ipu";
>> +		};
>> +
>> +		intc_ipu_c0: intc_ipu_c0@48211000 {
>> +			reg = <0x48211000 0x2000>;
>> +			ti,hwmods = "intc_ipu_c0";
>> +		};
>> +
>> +		intc_ipu_c1: intc_ipu_c1@48211000 {
>> +			reg = <0x48211000 0x2000>;
>> +			ti,hwmods = "intc_ipu_c1";
>> +		};
>
> Do we need such entries?
>
The point is if we remove it from here, we need to
remove associated hwmod entries as well o.w boot
will fail. Anyway, as mentioned I can do another
pass to see if I can remove some more.

For now what you see is what is in hwmod data file.

[..]

>> +		wd_timer2: wd_timer2@4ae14000 {
>> +			reg = <0x4ae14000 0x80>;
>> +			ti,hwmods = "wd_timer2";
>> +		};
>> +
>> +		wd_timer3: wd_timer3@40130000 {
>> +			reg = <0x40130000 0x80>;
>> +			ti,hwmods = "wd_timer3";
>> +		};
>
> In case of real device and existing binding, you must populate every
> entries (IRQ, DMA...).
>
I agree for the drivers which are already DT adapted. I
shall update those ones.

Thanks for review Benoit. I will update the patch based
on comments.

Regards,
Santosh


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 269a328..915fd11 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -500,5 +500,243 @@ 
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
 		};
+
+		l4_emif_ocp_fw: l4_emif_ocp_fw@4a20c000 {
+			reg = <0x4a20c000 0x100>;
+			ti,hwmods = "emif_ocp_fw";
+		};
+
+		mpu_l3_main_1: mpu_l3_main_1@44000000 {
+			reg = <0x44000000 0x2000>;
+			ti,hwmods = "l3_main_1";
+		};
+
+		mpu_l3_main_2: mpu_l3_main_2@44800000 {
+			reg = <0x44800000 0x3000>;
+			ti,hwmods = "l3_main_2";
+		};
+
+		mpu_l3_main_3: mpu_l3_main_3@45000000 {
+			reg = <0x44800000 0x4000>;
+			ti,hwmods = "l3_main_3";
+		};
+
+		l4_ocp_wp_noc: l4_ocp_wp_noc@4a102000 {
+			reg = <0x44800000 0x80>;
+			ti,hwmods = "ocp_wp_noc";
+		};
+
+		abe_aess: abe_aess@401f1000 {
+			reg = <0x44800000 0x400>;
+			ti,hwmods = "aess";
+		};
+
+		c2c: c2c@5c000000 {
+			reg = <0x5c000000 0x100>;
+			ti,hwmods = "c2c";
+		};
+
+		ctrl_module_core: ctrl_module_core@4a002000 {
+			reg = <0x4a002000 0x800>,
+			      <0x4a002800 0x1000>;
+			ti,hwmods = "ctrl_module_core";
+		};
+
+		ctrl_module_wkup: ctrl_module_wkup@4a002000 {
+			reg = <0x4ae0c000 0x800>,
+			      <0x4ae0c800 0x800>;
+			ti,hwmods = "ctrl_module_wkup";
+		};
+
+		dss: dss@58000000 {
+			reg = <0x58000000 0x80>;
+			ti,hwmods = "dss_core";
+		};
+
+		dss_dispc: dss_dispc@58001000 {
+			reg = <0x58001000 0x1000>;
+			ti,hwmods = "dss_dispc";
+		};
+
+		dss_dsi1_a: dss_dsi1_a@58004000 {
+			reg = <0x58004000 0x200>;
+			ti,hwmods = "dss_dsi1_a";
+		};
+
+		dss_dsi1_b: dss_dsi1_b@58005000 {
+			reg = <0x58005000 0x200>;
+			ti,hwmods = "dss_dsi1_b";
+		};
+
+		dss_dsi1_c: dss_dsi1_c@58009000 {
+			reg = <0x58009000 0x200>;
+			ti,hwmods = "dss_dsi1_c";
+		};
+
+		dss_hdmi: dss_hdmi@58060000 {
+			reg = <0x58060000 0x19000>;
+			ti,hwmods = "dss_hdmi";
+		};
+
+		dss_rfbi: dss_rfbi@580020000 {
+			reg = <0x58002000 0x100>;
+			ti,hwmods = "dss_rfbi";
+		};
+
+		elm: elm@48078000 {
+			reg = <0x48078000 0x1000>;
+			ti,hwmods = "elm";
+		};
+
+		fdif: elm@4a10a000 {
+			reg = <0x4a10a000 0x200>;
+			ti,hwmods = "fdif";
+		};
+
+		gpmc: gpmc@50000000 {
+			reg = <0x50000000 0x400>;
+			ti,hwmods = "gpmc";
+		};
+
+		gpu: gpu@5600fe00 {
+			reg = <0x5600fe00 0x2000>;
+			ti,hwmods = "gpu";
+		};
+
+
+		hdq1w: hdq1w@480b2000 {
+			reg = <0x480b2000 0x20>;
+			ti,hwmods = "hdq1w";
+		};
+
+		hsi: hsi@4a05a000 {
+			reg = <0x4a05a000 0x2000>;
+			ti,hwmods = "hsi";
+		};
+
+		ipu: ipu@55082000 {
+			reg = <0x55082000 0x100>;
+			ti,hwmods = "ipu";
+		};
+
+		intc_ipu_c0: intc_ipu_c0@48211000 {
+			reg = <0x48211000 0x2000>;
+			ti,hwmods = "intc_ipu_c0";
+		};
+
+		intc_ipu_c1: intc_ipu_c1@48211000 {
+			reg = <0x48211000 0x2000>;
+			ti,hwmods = "intc_ipu_c1";
+		};
+
+		mmu_ipu: mmu_ipu@55080800 {
+			reg = <0x55080800 0x1000>;
+			ti,hwmods = "mmu_ipu";
+		};
+
+		iss: iss@52000000 {
+			reg = <0x52000000 0x20>;
+			ti,hwmods = "iss";
+		};
+
+		iva: iva@5a05a400 {
+			reg = <0x5a05a400 0x80>;
+			ti,hwmods = "iva";
+		};
+
+		mailbox: mailbox@4a0f4000 {
+			reg = <0x4a0f4000 0x200>;
+			ti,hwmods = "mailbox";
+		};
+
+		mcasp: mcasp@40128000 {
+			reg = <0x40128000 0x400>;
+			ti,hwmods = "mcasp";
+		};
+
+		mcspi1: mcspi1@48098000 {
+			reg = <0x48098000 0x200>;
+			ti,hwmods = "mcspi1";
+		};
+
+		mcspi2: mcspi2@4809a000 {
+			reg = <0x4809a000 0x200>;
+			ti,hwmods = "mcspi2";
+		};
+
+		mcspi3: mcspi3@480b8000 {
+			reg = <0x480b8000 0x200>;
+			ti,hwmods = "mcspi3";
+		};
+
+		mcspi4: mcspi4@480ba000 {
+			reg = <0x480ba000 0x200>;
+			ti,hwmods = "mcspi4";
+		};
+
+		ocp2scp1: ocp2scp1@4a080000 {
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+		};
+
+		sata: sata@4a141100 {
+			reg = <0x4a141100 0x08>;
+			ti,hwmods = "sata";
+		};
+
+		scrm: scrm@4ae0a000 {
+			reg = <0x4ae0a000 0x800>;
+			ti,hwmods = "scrm";
+		};
+
+		slimbus1: slimbus1@4012c000 {
+			reg = <0x4012c000 0x400>;
+			ti,hwmods = "slimbus1";
+		};
+
+		smartreflex_core: smartreflex_core@4a0dd000 {
+			reg = <0x4a0dd000 0x40>;
+			ti,hwmods = "smartreflex_core";
+		};
+
+		smartreflex_mm: smartreflex_mm@4a0db000 {
+			reg = <0x4a0db000 0x40>;
+			ti,hwmods = "smartreflex_mm";
+		};
+
+		smartreflex_mpu: smartreflex_mpu@4a0d9000 {
+			reg = <0x4a0d9000 0x40>;
+			ti,hwmods = "smartreflex_mpu";
+		};
+
+		spinlock: spinlock@4a0f6000 {
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
+		usb_host_hs: usb_host_hs@4a064c00 {
+			reg = <0x4a064c00 0x100>;
+			ti,hwmods = "usb_host_hs";
+		};
+
+		usb_otg_ss: usb_otg_ss@4a030000 {
+			reg = <0x4a030000 0x100>;
+			ti,hwmods = "usb_otg_ss";
+		};
+
+		usb_tll_hs: usb_tll_hs@4a062800 {
+			reg = <0x4a062800 0x400>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		wd_timer2: wd_timer2@4ae14000 {
+			reg = <0x4ae14000 0x80>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		wd_timer3: wd_timer3@40130000 {
+			reg = <0x40130000 0x80>;
+			ti,hwmods = "wd_timer3";
+		};
 	};
 };