diff mbox

[05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default

Message ID 1362139864-9233-6-git-send-email-santosh.shilimkar@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Santosh Shilimkar March 1, 2013, 12:10 p.m. UTC
Enables MPUSS ES2 power management mode using ES2_PM_MODE in
AMBA_IF_MODE register.

0x0: ES1 behavior, CPU cores would enter and exit OFF mode together. Broken
0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode independently.

This is one time settings thanks to always ON domain.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/mach-omap2/omap-secure.h    |    2 ++
 arch/arm/mach-omap2/omap-wakeupgen.c |   14 ++++++++++++++
 arch/arm/mach-omap2/omap-wakeupgen.h |    1 +
 3 files changed, 17 insertions(+)

Comments

Nishanth Menon March 1, 2013, 7:37 p.m. UTC | #1
On 17:40-20130301, Santosh Shilimkar wrote:
> Enables MPUSS ES2 power management mode using ES2_PM_MODE in
> AMBA_IF_MODE register.
> 
> 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together. Broken
> 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode independently.
> 
> This is one time settings thanks to always ON domain.
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/mach-omap2/omap-secure.h    |    2 ++
>  arch/arm/mach-omap2/omap-wakeupgen.c |   14 ++++++++++++++
>  arch/arm/mach-omap2/omap-wakeupgen.h |    1 +
>  3 files changed, 17 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
> index 0e72917..82b3c4c 100644
> --- a/arch/arm/mach-omap2/omap-secure.h
> +++ b/arch/arm/mach-omap2/omap-secure.h
> @@ -42,6 +42,8 @@
>  #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
>  #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
>  
> +#define OMAP5_MON_AMBA_IF_INDEX		0x108
> +
>  /* Secure PPA(Primary Protected Application) APIs */
>  #define OMAP4_PPA_L2_POR_INDEX		0x23
>  #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> index 5d3b4f4..a7350dd 100644
> --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> @@ -403,6 +403,7 @@ int __init omap_wakeupgen_init(void)
>  {
>  	int i;
>  	unsigned int boot_cpu = smp_processor_id();
> +	u32 val;
>  
>  	/* Not supported on OMAP4 ES1.0 silicon */
>  	if (omap_rev() == OMAP4430_REV_ES1_0) {
> @@ -444,6 +445,19 @@ int __init omap_wakeupgen_init(void)
>  	for (i = 0; i < max_irqs; i++)
>  		irq_target_cpu[i] = boot_cpu;
>  
> +	/*
> +	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
> +	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
> +	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
> +	 * independently.
> +	 * This needs to be set one time thanks to always ON domain.
> +	 */
> +	if (soc_is_omap54xx()) {
> +		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
> +		val |= BIT(5);
BIT(5) is ES2_PM_MODE for es2.0 only - we dont have a OMAP5 revision check atm.
maybe 
> +		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
> +	}
> +
>  	irq_hotplug_init();
>  	irq_pm_init();
>  
> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
> index b0fd16f..b3c8ecc 100644
> --- a/arch/arm/mach-omap2/omap-wakeupgen.h
> +++ b/arch/arm/mach-omap2/omap-wakeupgen.h
> @@ -27,6 +27,7 @@
>  #define OMAP_WKG_ENB_E_1			0x420
>  #define OMAP_AUX_CORE_BOOT_0			0x800
>  #define OMAP_AUX_CORE_BOOT_1			0x804
> +#define OMAP_AMBA_IF_MODE			0x80c
>  #define OMAP_PTMSYNCREQ_MASK			0xc00
>  #define OMAP_PTMSYNCREQ_EN			0xc04
>  #define OMAP_TIMESTAMPCYCLELO			0xc08

Curious, I see OMAP5_AMBA_IF_MODE_OFFSET in
arch/arm/mach-omap2/omap4-sar-layout.h
if we dont save new modified contents there, Wont restore logic just
reset it back to 0?
Santosh Shilimkar March 2, 2013, 5:47 a.m. UTC | #2
On Saturday 02 March 2013 01:07 AM, Nishanth Menon wrote:
> On 17:40-20130301, Santosh Shilimkar wrote:
>> Enables MPUSS ES2 power management mode using ES2_PM_MODE in
>> AMBA_IF_MODE register.
>>
>> 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together. Broken
>> 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode independently.
>>
>> This is one time settings thanks to always ON domain.
>>
>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> ---
>>  arch/arm/mach-omap2/omap-secure.h    |    2 ++
>>  arch/arm/mach-omap2/omap-wakeupgen.c |   14 ++++++++++++++
>>  arch/arm/mach-omap2/omap-wakeupgen.h |    1 +
>>  3 files changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
>> index 0e72917..82b3c4c 100644
>> --- a/arch/arm/mach-omap2/omap-secure.h
>> +++ b/arch/arm/mach-omap2/omap-secure.h
>> @@ -42,6 +42,8 @@
>>  #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
>>  #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
>>  
>> +#define OMAP5_MON_AMBA_IF_INDEX		0x108
>> +
>>  /* Secure PPA(Primary Protected Application) APIs */
>>  #define OMAP4_PPA_L2_POR_INDEX		0x23
>>  #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
>> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
>> index 5d3b4f4..a7350dd 100644
>> --- a/arch/arm/mach-omap2/omap-wakeupgen.c
>> +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
>> @@ -403,6 +403,7 @@ int __init omap_wakeupgen_init(void)
>>  {
>>  	int i;
>>  	unsigned int boot_cpu = smp_processor_id();
>> +	u32 val;
>>  
>>  	/* Not supported on OMAP4 ES1.0 silicon */
>>  	if (omap_rev() == OMAP4430_REV_ES1_0) {
>> @@ -444,6 +445,19 @@ int __init omap_wakeupgen_init(void)
>>  	for (i = 0; i < max_irqs; i++)
>>  		irq_target_cpu[i] = boot_cpu;
>>  
>> +	/*
>> +	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
>> +	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
>> +	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
>> +	 * independently.
>> +	 * This needs to be set one time thanks to always ON domain.
>> +	 */
>> +	if (soc_is_omap54xx()) {
>> +		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
>> +		val |= BIT(5);
> BIT(5) is ES2_PM_MODE for es2.0 only - we dont have a OMAP5 revision check atm.
> maybe 
>> +		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
>> +	}
>> +
>>  	irq_hotplug_init();
>>  	irq_pm_init();
>>  
>> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
>> index b0fd16f..b3c8ecc 100644
>> --- a/arch/arm/mach-omap2/omap-wakeupgen.h
>> +++ b/arch/arm/mach-omap2/omap-wakeupgen.h
>> @@ -27,6 +27,7 @@
>>  #define OMAP_WKG_ENB_E_1			0x420
>>  #define OMAP_AUX_CORE_BOOT_0			0x800
>>  #define OMAP_AUX_CORE_BOOT_1			0x804
>> +#define OMAP_AMBA_IF_MODE			0x80c
>>  #define OMAP_PTMSYNCREQ_MASK			0xc00
>>  #define OMAP_PTMSYNCREQ_EN			0xc04
>>  #define OMAP_TIMESTAMPCYCLELO			0xc08
> 
> Curious, I see OMAP5_AMBA_IF_MODE_OFFSET in
> arch/arm/mach-omap2/omap4-sar-layout.h
> if we dont save new modified contents there, Wont restore logic just
> reset it back to 0?
> 
It is already restored in the wakeup-gen restore code.

Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Nishanth Menon March 4, 2013, 6:29 p.m. UTC | #3
On 11:17-20130302, Santosh Shilimkar wrote:
> On Saturday 02 March 2013 01:07 AM, Nishanth Menon wrote:
> > On 17:40-20130301, Santosh Shilimkar wrote:
> >> Enables MPUSS ES2 power management mode using ES2_PM_MODE in
> >> AMBA_IF_MODE register.
> >>
> >> 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together. Broken
> >> 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode independently.
> >>
> >> This is one time settings thanks to always ON domain.
> >>
> >> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> >> ---
> >>  arch/arm/mach-omap2/omap-secure.h    |    2 ++
> >>  arch/arm/mach-omap2/omap-wakeupgen.c |   14 ++++++++++++++
> >>  arch/arm/mach-omap2/omap-wakeupgen.h |    1 +
> >>  3 files changed, 17 insertions(+)
> >>
> >> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
> >> index 0e72917..82b3c4c 100644
> >> --- a/arch/arm/mach-omap2/omap-secure.h
> >> +++ b/arch/arm/mach-omap2/omap-secure.h
> >> @@ -42,6 +42,8 @@
> >>  #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
> >>  #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
> >>  
> >> +#define OMAP5_MON_AMBA_IF_INDEX		0x108
> >> +
> >>  /* Secure PPA(Primary Protected Application) APIs */
> >>  #define OMAP4_PPA_L2_POR_INDEX		0x23
> >>  #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
> >> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> >> index 5d3b4f4..a7350dd 100644
> >> --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> >> +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> >> @@ -403,6 +403,7 @@ int __init omap_wakeupgen_init(void)
> >>  {
> >>  	int i;
> >>  	unsigned int boot_cpu = smp_processor_id();
> >> +	u32 val;
> >>  
> >>  	/* Not supported on OMAP4 ES1.0 silicon */
> >>  	if (omap_rev() == OMAP4430_REV_ES1_0) {
> >> @@ -444,6 +445,19 @@ int __init omap_wakeupgen_init(void)
> >>  	for (i = 0; i < max_irqs; i++)
> >>  		irq_target_cpu[i] = boot_cpu;
> >>  
> >> +	/*
> >> +	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
> >> +	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
> >> +	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
> >> +	 * independently.
> >> +	 * This needs to be set one time thanks to always ON domain.
> >> +	 */
> >> +	if (soc_is_omap54xx()) {
> >> +		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
> >> +		val |= BIT(5);
> > BIT(5) is ES2_PM_MODE for es2.0 only - we dont have a OMAP5 revision check atm.
> > maybe 
OK on ES1.0 bit from previous discussion. I still suggest having a macro for
BIT(5) instead of having to review TRM to ensure this is right.
> >> +		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
> >> +	}
> >> +
> >>  	irq_hotplug_init();
> >>  	irq_pm_init();
> >>  
> >> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
> >> index b0fd16f..b3c8ecc 100644
> >> --- a/arch/arm/mach-omap2/omap-wakeupgen.h
> >> +++ b/arch/arm/mach-omap2/omap-wakeupgen.h
> >> @@ -27,6 +27,7 @@
> >>  #define OMAP_WKG_ENB_E_1			0x420
> >>  #define OMAP_AUX_CORE_BOOT_0			0x800
> >>  #define OMAP_AUX_CORE_BOOT_1			0x804
> >> +#define OMAP_AMBA_IF_MODE			0x80c
> >>  #define OMAP_PTMSYNCREQ_MASK			0xc00
> >>  #define OMAP_PTMSYNCREQ_EN			0xc04
> >>  #define OMAP_TIMESTAMPCYCLELO			0xc08
> > 
> > Curious, I see OMAP5_AMBA_IF_MODE_OFFSET in
> > arch/arm/mach-omap2/omap4-sar-layout.h
> > if we dont save new modified contents there, Wont restore logic just
> > reset it back to 0?
> > 
> It is already restored in the wakeup-gen restore code.
I apologize, I do not see it in:
https://github.com/SantoshShilimkar/linux/blob/testing/3.10/omap5-int-rebuild/arch/arm/mach-omap2/omap-wakeupgen.c
I might have expected an save of val to sar offset to ensure this is
done, but since you indicate this is in wakeupgen restore logic, which I
presume is done by ROM, we might expect an write to sar_base +
OMAP5_AMBA_IF_MODE_OFFSET with the val for it to function?
Santosh Shilimkar March 10, 2013, 6:07 p.m. UTC | #4
On Monday 04 March 2013 11:59 PM, Nishanth Menon wrote:
> On 11:17-20130302, Santosh Shilimkar wrote:
>> On Saturday 02 March 2013 01:07 AM, Nishanth Menon wrote:
>>> On 17:40-20130301, Santosh Shilimkar wrote:
>>>> Enables MPUSS ES2 power management mode using ES2_PM_MODE in
>>>> AMBA_IF_MODE register.
>>>>

[..]

>>>> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
>>>> index b0fd16f..b3c8ecc 100644
>>>> --- a/arch/arm/mach-omap2/omap-wakeupgen.h
>>>> +++ b/arch/arm/mach-omap2/omap-wakeupgen.h
>>>> @@ -27,6 +27,7 @@
>>>>  #define OMAP_WKG_ENB_E_1			0x420
>>>>  #define OMAP_AUX_CORE_BOOT_0			0x800
>>>>  #define OMAP_AUX_CORE_BOOT_1			0x804
>>>> +#define OMAP_AMBA_IF_MODE			0x80c
>>>>  #define OMAP_PTMSYNCREQ_MASK			0xc00
>>>>  #define OMAP_PTMSYNCREQ_EN			0xc04
>>>>  #define OMAP_TIMESTAMPCYCLELO			0xc08
>>>
>>> Curious, I see OMAP5_AMBA_IF_MODE_OFFSET in
>>> arch/arm/mach-omap2/omap4-sar-layout.h
>>> if we dont save new modified contents there, Wont restore logic just
>>> reset it back to 0?
>>>
>> It is already restored in the wakeup-gen restore code.
> I apologize, I do not see it in:
> https://github.com/SantoshShilimkar/linux/blob/testing/3.10/omap5-int-rebuild/arch/arm/mach-omap2/omap-wakeupgen.c
> I might have expected an save of val to sar offset to ensure this is
> done, but since you indicate this is in wakeupgen restore logic, which I
> presume is done by ROM, we might expect an write to sar_base +
> OMAP5_AMBA_IF_MODE_OFFSET with the val for it to function?
> 
Arr.. Looks like I missed the hunk while updating the patches. Will
fix the appropriate patch which updates the wakeupgen SAR offsets.

Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 0e72917..82b3c4c 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -42,6 +42,8 @@ 
 #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
+#define OMAP5_MON_AMBA_IF_INDEX		0x108
+
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 5d3b4f4..a7350dd 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -403,6 +403,7 @@  int __init omap_wakeupgen_init(void)
 {
 	int i;
 	unsigned int boot_cpu = smp_processor_id();
+	u32 val;
 
 	/* Not supported on OMAP4 ES1.0 silicon */
 	if (omap_rev() == OMAP4430_REV_ES1_0) {
@@ -444,6 +445,19 @@  int __init omap_wakeupgen_init(void)
 	for (i = 0; i < max_irqs; i++)
 		irq_target_cpu[i] = boot_cpu;
 
+	/*
+	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
+	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
+	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
+	 * independently.
+	 * This needs to be set one time thanks to always ON domain.
+	 */
+	if (soc_is_omap54xx()) {
+		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
+		val |= BIT(5);
+		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
+	}
+
 	irq_hotplug_init();
 	irq_pm_init();
 
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
index b0fd16f..b3c8ecc 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/omap-wakeupgen.h
@@ -27,6 +27,7 @@ 
 #define OMAP_WKG_ENB_E_1			0x420
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
+#define OMAP_AMBA_IF_MODE			0x80c
 #define OMAP_PTMSYNCREQ_MASK			0xc00
 #define OMAP_PTMSYNCREQ_EN			0xc04
 #define OMAP_TIMESTAMPCYCLELO			0xc08