From patchwork Thu Mar 14 20:58:15 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nishanth Menon X-Patchwork-Id: 2273641 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id C2F163FC8A for ; Thu, 14 Mar 2013 20:59:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752859Ab3CNU7Q (ORCPT ); Thu, 14 Mar 2013 16:59:16 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:38029 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752676Ab3CNU7O (ORCPT ); Thu, 14 Mar 2013 16:59:14 -0400 Received: from dlelxv30.itg.ti.com ([172.17.2.17]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id r2EKwtWg000372; Thu, 14 Mar 2013 15:58:55 -0500 Received: from DLEE70.ent.ti.com (dlee70.ent.ti.com [157.170.170.113]) by dlelxv30.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2EKwtUR008770; Thu, 14 Mar 2013 15:58:55 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by DLEE70.ent.ti.com (157.170.170.113) with Microsoft SMTP Server id 14.2.342.3; Thu, 14 Mar 2013 15:58:54 -0500 Received: from localhost (kahuna.am.dhcp.ti.com [128.247.75.12]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2EKwsvl023966; Thu, 14 Mar 2013 15:58:54 -0500 From: Nishanth Menon To: CC: Nishanth Menon , Kevin Hilman , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Santosh Shilimkar , Shawn Guo , Keerthy , , , , Subject: [PATCH 8/8] cpufreq: omap: remove omap-cpufreq Date: Thu, 14 Mar 2013 15:58:15 -0500 Message-ID: <1363294695-658-9-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1363294695-658-1-git-send-email-nm@ti.com> References: <1363294695-658-1-git-send-email-nm@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org We can now use cpufreq-cpu0 driver using DT entries. remove the redundant omap-cpufreq driver from the tree. Remove MAINTAINERS file entry for the same as well. Cc: Kevin Hilman Cc: "Benoît Cousson" Cc: Santosh Shilimkar Cc: Shawn Guo Cc: Keerthy Cc: linux-omap@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Nishanth Menon Acked-by: Viresh Kumar --- MAINTAINERS | 1 - drivers/cpufreq/Kconfig.arm | 6 - drivers/cpufreq/Makefile | 1 - drivers/cpufreq/omap-cpufreq.c | 291 ---------------------------------------- 4 files changed, 299 deletions(-) delete mode 100644 drivers/cpufreq/omap-cpufreq.c diff --git a/MAINTAINERS b/MAINTAINERS index 9561658..d9c11bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5654,7 +5654,6 @@ M: Kevin Hilman L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/*omap*/*pm* -F: drivers/cpufreq/omap-cpufreq.c OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT M: Rajendra Nayak diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 030ddf6..1cb810a 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -2,12 +2,6 @@ # ARM CPU Frequency scaling drivers # -config ARM_OMAP2PLUS_CPUFREQ - bool "TI OMAP2+" - depends on ARCH_OMAP2PLUS - default ARCH_OMAP2PLUS - select CPU_FREQ_TABLE - config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 863fd18..d52076c 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o -obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c deleted file mode 100644 index 9128c07..0000000 --- a/drivers/cpufreq/omap-cpufreq.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * CPU frequency scaling for OMAP using OPP information - * - * Copyright (C) 2005 Nokia Corporation - * Written by Tony Lindgren - * - * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King - * - * Copyright (C) 2007-2011 Texas Instruments, Inc. - * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* OPP tolerance in percentage */ -#define OPP_TOLERANCE 4 - -static struct cpufreq_frequency_table *freq_table; -static atomic_t freq_table_users = ATOMIC_INIT(0); -static struct clk *mpu_clk; -static struct device *mpu_dev; -static struct regulator *mpu_reg; - -static int omap_verify_speed(struct cpufreq_policy *policy) -{ - if (!freq_table) - return -EINVAL; - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static unsigned int omap_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NR_CPUS) - return 0; - - rate = clk_get_rate(mpu_clk) / 1000; - return rate; -} - -static int omap_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int i; - int r, ret = 0; - struct cpufreq_freqs freqs; - struct opp *opp; - unsigned long freq, volt = 0, volt_old = 0, tol = 0; - - if (!freq_table) { - dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__, - policy->cpu); - return -EINVAL; - } - - ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &i); - if (ret) { - dev_dbg(mpu_dev, "%s: cpu%d: no freq match for %d(ret=%d)\n", - __func__, policy->cpu, target_freq, ret); - return ret; - } - freqs.new = freq_table[i].frequency; - if (!freqs.new) { - dev_err(mpu_dev, "%s: cpu%d: no match for freq %d\n", __func__, - policy->cpu, target_freq); - return -EINVAL; - } - - freqs.old = omap_getspeed(policy->cpu); - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new && policy->cur == freqs.new) - return ret; - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - freq = freqs.new * 1000; - ret = clk_round_rate(mpu_clk, freq); - if (IS_ERR_VALUE(ret)) { - dev_warn(mpu_dev, - "CPUfreq: Cannot find matching frequency for %lu\n", - freq); - return ret; - } - freq = ret; - - if (mpu_reg) { - rcu_read_lock(); - opp = opp_find_freq_ceil(mpu_dev, &freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", - __func__, freqs.new); - return -EINVAL; - } - volt = opp_get_voltage(opp); - rcu_read_unlock(); - tol = volt * OPP_TOLERANCE / 100; - volt_old = regulator_get_voltage(mpu_reg); - } - - dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", - freqs.old / 1000, volt_old ? volt_old / 1000 : -1, - freqs.new / 1000, volt ? volt / 1000 : -1); - - /* scaling up? scale voltage before frequency */ - if (mpu_reg && (freqs.new > freqs.old)) { - r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); - if (r < 0) { - dev_warn(mpu_dev, "%s: unable to scale voltage up.\n", - __func__); - freqs.new = freqs.old; - goto done; - } - } - - ret = clk_set_rate(mpu_clk, freqs.new * 1000); - - /* scaling down? scale voltage after frequency */ - if (mpu_reg && (freqs.new < freqs.old)) { - r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); - if (r < 0) { - dev_warn(mpu_dev, "%s: unable to scale voltage down.\n", - __func__); - ret = clk_set_rate(mpu_clk, freqs.old * 1000); - freqs.new = freqs.old; - goto done; - } - } - - freqs.new = omap_getspeed(policy->cpu); - -done: - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return ret; -} - -static inline void freq_table_free(void) -{ - if (atomic_dec_and_test(&freq_table_users)) - opp_free_cpufreq_table(mpu_dev, &freq_table); -} - -static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - - mpu_clk = clk_get(NULL, "cpufreq_ck"); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); - - if (policy->cpu >= NR_CPUS) { - result = -EINVAL; - goto fail_ck; - } - - policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - - if (!freq_table) - result = opp_init_cpufreq_table(mpu_dev, &freq_table); - - if (result) { - dev_err(mpu_dev, "%s: cpu%d: failed creating freq table[%d]\n", - __func__, policy->cpu, result); - goto fail_ck; - } - - atomic_inc_return(&freq_table_users); - - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (result) - goto fail_table; - - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = omap_getspeed(policy->cpu); - - /* - * On OMAP SMP configuartion, both processors share the voltage - * and clock. So both CPUs needs to be scaled together and hence - * needs software co-ordination. Use cpufreq affected_cpus - * interface to handle this scenario. Additional is_smp() check - * is to keep SMP_ON_UP build working. - */ - if (is_smp()) - cpumask_setall(policy->cpus); - - /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - return 0; - -fail_table: - freq_table_free(); -fail_ck: - clk_put(mpu_clk); - return result; -} - -static int omap_cpu_exit(struct cpufreq_policy *policy) -{ - freq_table_free(); - clk_put(mpu_clk); - return 0; -} - -static struct freq_attr *omap_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver omap_driver = { - .flags = CPUFREQ_STICKY, - .verify = omap_verify_speed, - .target = omap_target, - .get = omap_getspeed, - .init = omap_cpu_init, - .exit = omap_cpu_exit, - .name = "omap", - .attr = omap_cpufreq_attr, -}; - -static int __init omap_cpufreq_init(void) -{ - mpu_dev = get_cpu_device(0); - if (!mpu_dev) { - pr_warning("%s: unable to get the mpu device\n", __func__); - return -EINVAL; - } - - mpu_reg = regulator_get(mpu_dev, "vcc"); - if (IS_ERR(mpu_reg)) { - pr_warning("%s: unable to get MPU regulator\n", __func__); - mpu_reg = NULL; - } else { - /* - * Ensure physical regulator is present. - * (e.g. could be dummy regulator.) - */ - if (regulator_get_voltage(mpu_reg) < 0) { - pr_warn("%s: physical regulator not present for MPU\n", - __func__); - regulator_put(mpu_reg); - mpu_reg = NULL; - } - } - - return cpufreq_register_driver(&omap_driver); -} - -static void __exit omap_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&omap_driver); -} - -MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs"); -MODULE_LICENSE("GPL"); -module_init(omap_cpufreq_init); -module_exit(omap_cpufreq_exit);