From patchwork Fri Apr 12 18:05:42 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Javier Martinez Canillas X-Patchwork-Id: 2437351 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork2.kernel.org (Postfix) with ESMTP id 35F16DF2A1 for ; Fri, 12 Apr 2013 18:06:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756285Ab3DLSGR (ORCPT ); Fri, 12 Apr 2013 14:06:17 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:43016 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756181Ab3DLSGQ (ORCPT ); Fri, 12 Apr 2013 14:06:16 -0400 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: javier) with ESMTPSA id 9FBCA16985E7 From: Javier Martinez Canillas To: Steve Glendinning Cc: David Miller , Thomas Gleixner , Ingo Molnar , Rob Herring , Stephen Warren , Grant Likely , Jon Hunter , devicetree-discuss@lists.ozlabs.org, linux-omap , netdev@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH 1/2] genirq: add function to get IRQ edge/level flags Date: Fri, 12 Apr 2013 20:05:42 +0200 Message-Id: <1365789943-3812-2-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 1.7.7.6 In-Reply-To: <1365789943-3812-1-git-send-email-javier.martinez@collabora.co.uk> References: <1365789943-3812-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org According to Documentation/devicetree/bindings/interrupt-controller/interrupts.txt the "#interrupt-cells" property of an "interrupt-controller" is used to define the number of cells needed to specify a single interrupt. A commonly used variant is two cell on which #interrupt-cells = <2> and the first cell defines the index of the interrupt in the controller while the second cell is used to specify any of the following flags: - bits[3:0] trigger type and level flags 1 = low-to-high edge triggered 2 = high-to-low edge triggered 4 = active high level-sensitive 8 = active low level-sensitive An example of an interrupt controller which use the two cell format is the OMAP GPIO controller that allows GPIO lines to be used as IRQ (Documentation/devicetree/bindings/gpio/gpio-omap.txt) But setting #interrupt-cells = <2> on the OMAP GPIO device node and specifying the GPIO-IRQ type and level flags on the second cell does not store this value on the populated IORESOURCE_IRQ struct resource. This is because when using an IRQ from an interrupt controller and setting both cells (e.g:) interrupt-parent = <&gpio6>; interrupts = <16 8>; A call to of_irq_to_resource() is made and this function calls irq_of_parse_and_map_type() to get the virtual IRQ mapped to the real index for this interrupt controller. This IRQ number is populated on the struct resource: int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) { int irq = irq_of_parse_and_map(dev, index); .. r->start = r->end = irq; } irq_of_parse_and_map() calls to irq_create_of_mapping() which calls to the correct xlate function handler according to "#interrupt-cells" (irq_domain_xlate_onecell or irq_domain_xlate_twocell) and to irq_set_irq_type() to set the IRQ type. But the type is never returned so it can't be saved on the IRQ struct resource flags member. This means that drivers that want to get the IRQ edge/level flags defined in the Device Tree from a struct resource will not be able to get it. Drivers can get the IRQ flags by using irq_get_irq_data(irq) and irqd_get_trigger_type(irq_data) but this will unnecessary expose irq_data to callers and also is more error prone. So, is better to add an irq_get_trigger_type() function to obtain the edge/level flags for an IRQ. Signed-off-by: Javier Martinez Canillas --- include/linux/irq.h | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/include/linux/irq.h b/include/linux/irq.h index bc4e066..93231cb 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -579,6 +579,12 @@ static inline struct msi_desc *irq_data_get_msi(struct irq_data *d) return d->msi_desc; } +static inline u32 irq_get_trigger_type(unsigned int irq) +{ + struct irq_data *d = irq_get_irq_data(irq); + return d ? d->state_use_accessors & IRQD_TRIGGER_MASK : 0; +} + int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node, struct module *owner);