From patchwork Wed May 22 18:18:37 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nishanth Menon X-Patchwork-Id: 2602871 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork2.kernel.org (Postfix) with ESMTP id DA191DF215 for ; Wed, 22 May 2013 18:19:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756258Ab3EVST2 (ORCPT ); Wed, 22 May 2013 14:19:28 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:55109 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753341Ab3EVST0 (ORCPT ); Wed, 22 May 2013 14:19:26 -0400 Received: from dflxv15.itg.ti.com ([128.247.5.124]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id r4MIIpiW018540; Wed, 22 May 2013 13:18:52 -0500 Received: from DLEE70.ent.ti.com (dlee70.ent.ti.com [157.170.170.113]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id r4MIIpXa023212; Wed, 22 May 2013 13:18:51 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by DLEE70.ent.ti.com (157.170.170.113) with Microsoft SMTP Server id 14.2.342.3; Wed, 22 May 2013 13:18:51 -0500 Received: from localhost (kahuna.am.dhcp.ti.com [128.247.91.59]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r4MIIp7w015931; Wed, 22 May 2013 13:18:51 -0500 From: Nishanth Menon To: Liam Girdwood , Mark Brown , Kevin Hilman , Tony Lindgren CC: , , , , , Grygorii Strashko , Nishanth Menon Subject: [RFC PATCH 4/4] HACK: OMAP4460/TPS/TWL/PandaBoardES - Enable VP regulator for cpufreq Date: Wed, 22 May 2013 13:18:37 -0500 Message-ID: <1369246717-4167-5-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1369246717-4167-1-git-send-email-nm@ti.com> References: <1369246717-4167-1-git-send-email-nm@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org This is just an example patch - Tested on PandaBoard-ES OMAP4460 Connectivity is as follows: VP_MPU -> VC_CH_MPU -> VC -> TPS62361 TPS62631 Voltage register selection is done using GPIO (GPIO_WK 7) VP_IVA -> VC_CH_IVA -> VC -> TWL6030/vcore2 VP_CORE -> VC_CH_CORE -> VC -> TWL6030/vcore1 NOT-Signed-off-by: Nishanth Menon --- arch/arm/boot/dts/omap4-panda-es.dts | 55 +++++++++++++++++++-- arch/arm/boot/dts/omap4.dtsi | 84 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4460.dtsi | 1 + arch/arm/boot/dts/tps62361.dtsi | 90 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/twl6030.dtsi | 68 +++++++++++++++++++++++++ 5 files changed, 294 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/tps62361.dtsi diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 08d2e38..71aa5f3 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -43,10 +43,18 @@ }; }; -&led_wkgpio_pins { - pinctrl-single,pins = < - 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ - >; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ + >; + }; + + tps62361_wkgpio_pins: pinmux_tps62361_wkpins { + pinctrl-single,pins = < + 0x1a 0xa03 /* gpio_wk7 OUTPUT | MODE 3 |OFF_HI */ + >; + }; }; &leds { @@ -68,3 +76,42 @@ linux,default-trigger = "mmc0"; }; }; + +#define TPS62361_PD_VSEL0 +#include "tps62361.dtsi" + +/* Board Specific configuration */ +&omap_tps62361 { + pinctrl-names = "default"; + pinctrl-0 = < + &tps62361_wkgpio_pins + >; + gpios = <&gpio1 7 1>; /* gpio_wk7 Set to HIGH */ + + ti,boot-voltage-micro-volts=<1203000>; + ti,vp=<&vp_mpu>; +}; + +&omap_twl6030_vcore1 { + ti,boot-voltage-micro-volts=<1200000>; + ti,vp=<&vp_core>; +}; + +&omap_twl6030_vcore2 { + ti,boot-voltage-micro-volts=<1200000>; + ti,vp = <&vp_iva>; +}; + +&omap_twl6030_vcore3 { + status = "disabled"; +}; + +&vc_mpu { + /* Due to potential lifetime impact, OFF voltage is set to RET V: TPS*/ + ti,off-micro-volts = <750000>; +}; + +&vc { + ti,i2c-high-speed; + ti,i2c-pad-load=<3>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1c6d969..b9fd360 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -108,6 +108,11 @@ ti,hwmods = "counter_32k"; }; + sysclk_in: sys_clkin { + #clock-cells = <0>; + compatible = "ti,omap-clock"; + }; + dpll_mpu: dpll_mpu { #clock-cells = <0>; compatible = "ti,omap-clock"; @@ -667,5 +672,84 @@ ram-bits = <12>; ti,has-mailbox; }; + + vc: vc@0x4A307B88 { + compatible = "ti,omap4-vc"; + clocks = <&sysclk_in>; + reg = <0x4A307B88 0x40>; + reg-names = "base-address"; + + ti,i2c-high-speed; /* belongs to board file */ + vc_mpu: vc_mpu { + compatible = "ti,omap4-vc-channel-mpu"; + ti,master-channel; + ti,retention-micro-volts = <750000>; + ti,off-micro-volts = <0>; + }; + + vc_iva: vc_iva { + compatible = "ti,omap4-vc-channel-iva"; + ti,retention-micro-volts = <750000>; + ti,off-micro-volts = <0>; + }; + + vc_core: vc_core { + compatible = "ti,omap4-vc-channel-core"; + ti,retention-micro-volts = <750000>; + ti,off-micro-volts = <0>; + }; + }; + + vp_mpu: vp@0x4a307b58 { + compatible = "ti,omap4-vp"; + + reg = <0x4a307b58 0x18>, <0x4A306014 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask=<0x20>; + + clocks = <&sysclk_in>; + + ti,vc-channel = <&vc_mpu>; + ti,min-step-micro-volts = <10000>; + ti,max-step-micro-volts = <50000>; + /* HACKs: belongs to SoC specific file */ + ti,min-micro-volts = <750000>; + ti,max-micro-volts = <1410000>; + }; + + vp_iva: vp@0x4a307b70 { + compatible = "ti,omap4-vp"; + + reg = <0x4a307b70 0x18>, <0x4A306010 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask=<0x20000000>; + + clocks = <&sysclk_in>; + + ti,vc-channel = <&vc_iva>; + /* HACKs: belongs to SoC specific file */ + ti,min-step-micro-volts = <10000>; + ti,max-step-micro-volts = <50000>; + ti,min-micro-volts = <750000>; + ti,max-micro-volts = <1260000>; + }; + + vp_core: vp@0x4a307b40 { + compatible = "ti,omap4-vp"; + + reg = <0x4a307b40 0x18>, <0x4A306010 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask=<0x200000>; + + clocks = <&sysclk_in>; + + regulator_name = "vdd_core"; + ti,vc-channel = <&vc_core>; + /* HACKs: belongs to SoC specific file */ + ti,min-step-micro-volts = <10000>; + ti,max-step-micro-volts = <50000>; + ti,min-micro-volts = <830000>; + ti,max-micro-volts = <1200000>; + }; }; }; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2cf227c..6937d92 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -20,6 +20,7 @@ 920000 1313000 >; clock-latency = <300000>; /* From legacy driver */ + cpu0-supply = <&omap_tps62361>; /* HACK: belongs to board file */ }; }; diff --git a/arch/arm/boot/dts/tps62361.dtsi b/arch/arm/boot/dts/tps62361.dtsi new file mode 100644 index 0000000..b82a50f --- /dev/null +++ b/arch/arm/boot/dts/tps62361.dtsi @@ -0,0 +1,90 @@ + +/* Add blah blah */ + +/* Register set definitions */ +#define REG_TPS6236X_SET_0 0x00 +#define REG_TPS6236X_SET_1 0x01 +#define REG_TPS6236X_SET_2 0x02 +#define REG_TPS6236X_SET_3 0x03 +#define REG_TPS6236X_CTRL 0x04 +#define REG_TPS6236X_TEMP 0x05 +#define REG_TPS6236X_RAMP_CTRL 0x06 +#define REG_TPS6236X_CHIP_ID0 0x08 +#define REG_TPS6236X_CHIP_ID1 0x09 + +/* Register field definitions for REG_TPS6236X_CTRL */ +#define REG_TPS6236X_CTRL_PD_EN (1 << 7) +#define REG_TPS6236X_CTRL_PD_VSEL0 (1 << 6) +#define REG_TPS6236X_CTRL_PD_VSEL1 (1 << 5) + +/* Register field definitions for REG_TPS6236X_RAMP_CTRL */ +#define REG_TPS6236X_RAMP_CTRL_RMP_SHIFT 5 +#define REG_TPS6236X_RAMP_CTRL_EN_DISC (1 << 2) +#define REG_TPS6236X_RAMP_CTRL_RAMP_PFM (1 << 1) + +/* Value definitions for REG_TPS6236X_RAMP_CTRL::RMP field */ +#define RMP_32MV_USEC 0x0 +#define RMP_16MV_USEC 0x1 +#define RMP_8MV_USEC 0x2 +#define RMP_4MV_USEC 0x3 +#define RMP_2MV_USEC 0x4 +#define RMP_1MV_USEC 0x5 + +/* Selected values */ +#define RMP_VALUE (RMP_32MV_USEC << REG_TPS6236X_RAMP_CTRL_RMP_SHIFT | REG_TPS6236X_RAMP_CTRL_EN_DISC | REG_TPS6236X_RAMP_CTRL_RAMP_PFM) + +#ifdef TPS62361_PD_VSEL0 +#define _CTRL_VALUE0 (REG_TPS6236X_CTRL_PD_EN | REG_TPS6236X_CTRL_PD_VSEL0) +#else +#define _CTRL_VALUE0 0x0 +#endif +#ifdef TPS62361_PD_VSEL1 +#define _CTRL_VALUE1 (REG_TPS6236X_CTRL_PD_EN | REG_TPS6236X_CTRL_PD_VSEL0) +#else +#define _CTRL_VALUE1 0x0 +#endif + +#if defined(TPS62361_PD_VSEL0) || defined(TPS62361_PD_VSEL1) +#define _CTRL_VALUE (_CTRL_VALUE0 | _CTRL_VALUE0) +#endif + +/ { + omap_tps62361: tps62361 { + compatible = "ti,omap-pmic"; + ti,non-zero-voltage-selector; + + /* Slave address */ + ti,i2c-slave-address = <0x60>; + /* I2C register address */ + ti,i2c-voltage-register = <0x01>; /* Set 1 */ + ti,i2c-command-register = <0x01>; /* Set 1 */ + + /* Slew rate in uV */ + ti,slew-rate-microvolt = <32000>; + /* Step size in uV */ + ti,step-size-microvolt = <10000>; + regulator-min-microvolt= <500000>; + regulator-max-microvolt= <1770000>; + + /* Optional - any voltage selector offset to care about */ + ti,voltage-selector-offset = <0x0>; + /* Optional - what mask to apply on vsel value before doing operations on it */ + ti,voltage-selector-mask =<0x7F>; + /* Optional - what bits to always set on voltage selector when sending to PMIC */ + ti,voltage-selector-set-bits =<0x80>; /* PFM mode */ + + /* Optional - Any access to be done over I2C SR to setup registers */ + ti,setup_commands=< + /* register_addr value */ + /* Setup Slew (ramp) rate */ + REG_TPS6236X_RAMP_CTRL RMP_VALUE + /* Setup PMIC internal pull if needed */ +#ifdef _CTRL_VALUE + REG_TPS6236X_CTRL _CTRL_VALUE +#endif + /* Enable thermal shutdown - 0 is enable :) */ + REG_TPS6236X_TEMP 0x0 + /* Setup the internal pulls */ + >; + }; +}; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd31..5e1f4ed 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -103,4 +103,72 @@ compatible = "ti,twl6030-pwmled"; #pwm-cells = <2>; }; + + omap_twl6030_vcore1: vcore1 { + compatible = "ti,omap-pmic"; + + /* Slave address */ + ti,i2c-slave-address = <0x12>; + /* I2C register address */ + ti,i2c-voltage-register = <0x55>; + ti,i2c-command-register = <0x56>; + + /* Slew rate in uV */ + ti,slew-rate-microvolt = <9000>; + /* Step size in uV */ + ti,step-size-microvolt = <12660>; + regulator-min-microvolt= <709000>; + regulator-max-microvolt= <1418000>; + + /* Optional - any voltage selector offset to care about */ + ti,voltage-selector-offset = <0x1>; + /* Optional - what mask to apply on vsel value before doing operations on it */ + ti,voltage-selector-mask =<0x7F>; + }; + + omap_twl6030_vcore2: vcore2 { + compatible = "ti,omap-pmic"; + + /* Slave address */ + ti,i2c-slave-address = <0x12>; + /* I2C register address */ + ti,i2c-voltage-register = <0x5b>; + ti,i2c-command-register = <0x5c>; + + /* Slew rate in uV */ + ti,slew-rate-microvolt = <9000>; + /* Step size in uV */ + ti,step-size-microvolt = <12660>; + /* Min voltage in uV for continous operational range at step size */ + regulator-min-microvolt= <709000>; + regulator-max-microvolt= <1418000>; + + /* Optional - any voltage selector offset to care about */ + ti,voltage-selector-offset = <0x1>; + /* Optional - what mask to apply on vsel value before doing operations on it */ + ti,voltage-selector-mask =<0x7F>; + }; + + omap_twl6030_vcore3: vcore3 { + compatible = "ti,omap-pmic"; + + /* Slave address */ + ti,i2c-slave-address = <0x12>; + /* I2C register address */ + ti,i2c-voltage-register = <0x61>; + ti,i2c-command-register = <0x62>; + + + /* Slew rate in uV */ + ti,slew-rate-microvolt = <9000>; + /* Step size in uV */ + ti,step-size-microvolt = <12660>; + regulator-min-microvolt= <709000>; + regulator-max-microvolt= <1418000>; + + /* Optional - any voltage selector offset to care about */ + ti,voltage-selector-offset = <0x1>; + /* Optional - what mask to apply on vsel value before doing operations on it */ + ti,voltage-selector-mask =<0x7F>; + }; };