@@ -43,8 +43,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
-obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_PHY) += phy/
+obj-$(CONFIG_USB) += misc/ phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
@@ -144,7 +144,6 @@ config USB_AT91
config USB_LPC32XX
tristate "LPC32XX USB Peripheral Controller"
depends on ARCH_LPC32XX
- depends on USB_PHY
select USB_ISP1301
help
This option selects the USB device controller in the LPC32xx SoC.
@@ -195,7 +194,6 @@ config USB_FUSB300
config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP1
- depends on USB_PHY
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
help
Many Texas Instruments OMAP processors have flexible full
@@ -188,7 +188,6 @@ config USB_EHCI_HCD_AT91
config USB_EHCI_MSM
tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
depends on ARCH_MSM
- depends on USB_PHY
select USB_EHCI_ROOT_HUB_TT
select USB_MSM_OTG
---help---
@@ -1,16 +1,11 @@
#
# Physical Layer USB driver configuration
#
-menuconfig USB_PHY
- bool "USB Physical Layer drivers"
- help
- USB controllers (those which are host, device or DRD) need a
- device to handle the physical layer signalling, commonly called
- a PHY.
-
- The following drivers add support for such PHY devices.
+menu "USB Physical Layer drivers"
-if USB_PHY
+config USB_PHY
+ bool
+ default n
#
# USB Transceiver Drivers
@@ -18,6 +13,7 @@ if USB_PHY
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
depends on AB8500_CORE
+ select USB_PHY
help
Enable this to support the USB OTG transceiver in AB8500 chip.
This transceiver supports high and full speed devices plus,
@@ -27,12 +23,14 @@ config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
select USB_OTG
+ select USB_PHY
help
Enable this to support Freescale USB OTG transceiver.
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
+ select USB_PHY
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
@@ -46,12 +44,14 @@ config ISP1301_OMAP
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
depends on CPU_MMP3
+ select USB_PHY
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
+ select USB_PHY
help
This driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any
@@ -70,6 +70,7 @@ config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS
select OMAP_CONTROL_USB
+ select USB_PHY
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -79,6 +80,7 @@ config OMAP_USB2
config OMAP_USB3
tristate "OMAP USB3 PHY Driver"
select OMAP_CONTROL_USB
+ select USB_PHY
help
Enable this to support the USB3 PHY that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -95,6 +97,7 @@ config SAMSUNG_USBPHY
config SAMSUNG_USB2PHY
tristate "Samsung USB 2.0 PHY controller Driver"
select SAMSUNG_USBPHY
+ select USB_PHY
help
Enable this to support Samsung USB 2.0 (High Speed) PHY controller
driver for Samsung SoCs.
@@ -102,6 +105,7 @@ config SAMSUNG_USB2PHY
config SAMSUNG_USB3PHY
tristate "Samsung USB 3.0 PHY controller Driver"
select SAMSUNG_USBPHY
+ select USB_PHY
help
Enable this to support Samsung USB 3.0 (Super Speed) phy controller
for samsung SoCs.
@@ -109,6 +113,7 @@ config SAMSUNG_USB3PHY
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ select USB_PHY
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
@@ -129,6 +134,7 @@ config TWL6030_USB
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
depends on GPIOLIB
+ select USB_PHY
help
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
@@ -139,6 +145,7 @@ config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
+ select USB_PHY
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
@@ -150,6 +157,7 @@ config USB_ISP1301
config USB_MSM_OTG
tristate "OTG support for Qualcomm on-chip USB controller"
depends on (USB || USB_GADGET) && ARCH_MSM
+ select USB_PHY
help
Enable this to support the USB OTG transceiver on MSM chips. It
handles PHY initialization, clock management, and workarounds
@@ -163,6 +171,7 @@ config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
select USB_OTG
+ select USB_PHY
help
Say Y here if you want to build Marvell USB OTG transciever
driver in kernel (including PXA and MMP series). This driver
@@ -174,6 +183,7 @@ config USB_MXS_PHY
tristate "Freescale MXS USB PHY support"
depends on ARCH_MXC || ARCH_MXS
select STMP_DEVICE
+ select USB_PHY
help
Enable this to support the Freescale MXS USB PHY.
@@ -182,6 +192,7 @@ config USB_MXS_PHY
config USB_RCAR_PHY
tristate "Renesas R-Car USB phy support"
depends on USB || USB_GADGET
+ select USB_PHY
help
Say Y here to add support for the Renesas R-Car USB phy driver.
This chip is typically used as USB phy for USB host, gadget.
@@ -204,4 +215,4 @@ config USB_ULPI_VIEWPORT
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
-endif # USB_PHY
+endmenu
Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. CC: Pavankumar Kondeti <pkondeti@codeaurora.org> CC: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> [USB_LPC32XX part] Acked-by: Roland Stigge <stigge@antcom.de> --- drivers/usb/Makefile | 3 +-- drivers/usb/gadget/Kconfig | 2 -- drivers/usb/host/Kconfig | 1 - drivers/usb/phy/Kconfig | 31 +++++++++++++++++++++---------- 4 files changed, 22 insertions(+), 15 deletions(-)