| Message ID | 1370414770-1485-4-git-send-email-r.sricharan@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Sricharan Thanks for sending this up in the series. On 06/05/2013 01:46 AM, Sricharan R wrote: > From: Dan Murphy <dmurphy@ti.com> > > Add support for blue LED 1 off of GPIO 153. > Make the LED a heartbeat LED > Configure the MUX for GPIO output. > > Cc: Dan Murphy <dmurphy@ti.com> > Signed-off-by: Dan Murphy <dmurphy@ti.com> > [Sricharan R <r.sricharan@ti.com>: Replaced constants with preprocessor macros] > Signed-off-by: Sricharan R <r.sricharan@ti.com> > --- > arch/arm/boot/dts/omap5-uevm.dts | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts > index cf862df..a2aed5b 100644 > --- a/arch/arm/boot/dts/omap5-uevm.dts > +++ b/arch/arm/boot/dts/omap5-uevm.dts > @@ -66,6 +66,16 @@ > device = <&hsusb2_phy>; > clock-frequency = <19200000>; /* 19.2 MHz */ > }; > + > + leds { > + compatible = "gpio-leds"; > + led@1 { > + label = "omap5:blue:usr1"; > + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + }; > }; > > &omap5_pmx_core { > @@ -77,6 +87,7 @@ > &mcbsp1_pins > &mcbsp2_pins > &usbhost_pins > + &led_gpio_pins > >; > > twl6040_pins: pinmux_twl6040_pins { > @@ -175,6 +186,12 @@ > 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 OUTPUT | MODE 6 ETH_NRESET */ > >; > }; > + > + led_gpio_pins: pinmux_led_gpio_pins { > + pinctrl-single,pins = < > + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 OUTPUT | MODE6 */ Same comment from Florian. We can drop the OUTPUT | MODE6 in the comment. > + >; > + }; > }; > > &omap5_pmx_wkup {
Hi, On Wednesday 05 June 2013 10:34 PM, Dan Murphy wrote: > Sricharan > > Thanks for sending this up in the series. > > On 06/05/2013 01:46 AM, Sricharan R wrote: >> From: Dan Murphy <dmurphy@ti.com> >> >> Add support for blue LED 1 off of GPIO 153. >> Make the LED a heartbeat LED >> Configure the MUX for GPIO output. >> >> Cc: Dan Murphy <dmurphy@ti.com> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> [Sricharan R <r.sricharan@ti.com>: Replaced constants with preprocessor macros] >> Signed-off-by: Sricharan R <r.sricharan@ti.com> >> --- >> arch/arm/boot/dts/omap5-uevm.dts | 17 +++++++++++++++++ >> 1 file changed, 17 insertions(+) >> >> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts >> index cf862df..a2aed5b 100644 >> --- a/arch/arm/boot/dts/omap5-uevm.dts >> +++ b/arch/arm/boot/dts/omap5-uevm.dts >> @@ -66,6 +66,16 @@ >> device = <&hsusb2_phy>; >> clock-frequency = <19200000>; /* 19.2 MHz */ >> }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + led@1 { >> + label = "omap5:blue:usr1"; >> + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ >> + linux,default-trigger = "heartbeat"; >> + default-state = "off"; >> + }; >> + }; >> }; >> >> &omap5_pmx_core { >> @@ -77,6 +87,7 @@ >> &mcbsp1_pins >> &mcbsp2_pins >> &usbhost_pins >> + &led_gpio_pins >> >; >> >> twl6040_pins: pinmux_twl6040_pins { >> @@ -175,6 +186,12 @@ >> 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 OUTPUT | MODE 6 ETH_NRESET */ >> >; >> }; >> + >> + led_gpio_pins: pinmux_led_gpio_pins { >> + pinctrl-single,pins = < >> + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 OUTPUT | MODE6 */ > Same comment from Florian. We can drop the OUTPUT | MODE6 in the comment. Ok thanks, Corrected in V2. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index cf862df..a2aed5b 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -66,6 +66,16 @@ device = <&hsusb2_phy>; clock-frequency = <19200000>; /* 19.2 MHz */ }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &omap5_pmx_core { @@ -77,6 +87,7 @@ &mcbsp1_pins &mcbsp2_pins &usbhost_pins + &led_gpio_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -175,6 +186,12 @@ 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 OUTPUT | MODE 6 ETH_NRESET */ >; }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 OUTPUT | MODE6 */ + >; + }; }; &omap5_pmx_wkup {