diff mbox

[5/5] mmc: omap_hsmmc: Add reg-offset to bindings documentation

Message ID 1372209901-6715-1-git-send-email-joelagnel@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Fernandes, Joel A June 26, 2013, 1:25 a.m. UTC
From: Joel A Fernandes <agnel.joel@gmail.com>

A new reg-offset property was added to account for register offsets
in some omap-hsmmc's. Document the new property.

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
---
 .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |    3 +++
 1 file changed, 3 insertions(+)

Comments

Hebbar, Gururaja June 26, 2013, 4:06 a.m. UTC | #1
On Wed, Jun 26, 2013 at 06:55:01, Fernandes, Joel wrote:
> From: Joel A Fernandes <agnel.joel@gmail.com>
> 
> A new reg-offset property was added to account for register offsets
> in some omap-hsmmc's. Document the new property.
> 

Small nitpick

I usually get feedback that any driver DT changes and the associated
Binding doc update should come in one single patch for better readability.

In this case, I believe it would be patch 1/5 & 5/5


Regards, 
Gururaja


> Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
> ---
>  .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |    3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> index 8c8908a..33f4b1e 100644
> --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -20,6 +20,9 @@ ti,dual-volt: boolean, supports dual voltage cards
>  ti,non-removable: non-removable slot (like eMMC)
>  ti,needs-special-reset: Requires a special softreset sequence
>  ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
> +reg-offset: Supplementing the common reg property (described in bindings/mmc/mmc.txt),
> +some omap-hsmmc's can start an offset from reg but are otherwise identical to others.
> +The registers between start to offset are considered reserved.
>  dmas: List of DMA specifiers with the controller specific format
>  as described in the generic DMA client binding. A tx and rx
>  specifier is required.
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 8c8908a..33f4b1e 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,6 +20,9 @@  ti,dual-volt: boolean, supports dual voltage cards
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+reg-offset: Supplementing the common reg property (described in bindings/mmc/mmc.txt),
+some omap-hsmmc's can start an offset from reg but are otherwise identical to others.
+The registers between start to offset are considered reserved.
 dmas: List of DMA specifiers with the controller specific format
 as described in the generic DMA client binding. A tx and rx
 specifier is required.