diff mbox

[v3,4/8] wl12xx: use frequency instead of enumerations for pdata clocks

Message ID 1372860209-3504-5-git-send-email-coelho@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Luciano Coelho July 3, 2013, 2:03 p.m. UTC
Instead of defining an enumeration with the FW specific values for the
different clock rates, use the actual frequency instead.  Also add a
boolean to specify whether the clock is XTAL or not.

Change all board files to reflect this.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 arch/arm/mach-davinci/board-da850-evm.c      |    3 +-
 arch/arm/mach-omap2/board-4430sdp.c          |    5 ++-
 arch/arm/mach-omap2/board-omap3evm.c         |    3 +-
 arch/arm/mach-omap2/board-omap4panda.c       |    3 +-
 arch/arm/mach-omap2/board-zoom-peripherals.c |    3 +-
 drivers/net/wireless/ti/wl12xx/main.c        |   57 +++++++++++++++++++++++++-
 drivers/net/wireless/ti/wl12xx/wl12xx.h      |   28 +++++++++++++
 include/linux/wl12xx.h                       |   27 ++----------
 8 files changed, 97 insertions(+), 32 deletions(-)

Comments

Felipe Balbi July 3, 2013, 2:16 p.m. UTC | #1
On Wed, Jul 03, 2013 at 05:03:25PM +0300, Luciano Coelho wrote:
> Instead of defining an enumeration with the FW specific values for the
> different clock rates, use the actual frequency instead.  Also add a
> boolean to specify whether the clock is XTAL or not.
> 
> Change all board files to reflect this.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Sekhar Nori <nsekhar@ti.com>
> Signed-off-by: Luciano Coelho <coelho@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 544b6fa..eddced8 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1377,7 +1377,8 @@  static const short da850_wl12xx_pins[] __initconst = {
 
 static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
 	.irq			= -1,
-	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.ref_clock_freq		= 38400000,
+	.ref_clock_xtal		= false,
 };
 
 static __init int da850_wl12xx_init(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 953f620..0d3cb10 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -693,8 +693,9 @@  static void __init omap4_sdp4430_wifi_mux_init(void)
 }
 
 static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26,
-	.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+	.ref_clock_freq = 26000000,
+	.ref_clock_xtal = false,
+	.tcxo_clock_freq = 26000000,
 };
 
 static void __init omap4_sdp4430_wifi_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 8abce3cd..8f953ed 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -458,7 +458,8 @@  static struct platform_device omap3evm_wlan_regulator = {
 };
 
 struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
+	.ref_clock_freq = 38400000,
+	.ref_clock_xtal = false,
 };
 #endif
 
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5b33626..b90fd4c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -230,7 +230,8 @@  static struct platform_device omap_vwlan_device = {
 };
 
 static struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
+	.ref_clock_freq = 38400000,
+	.ref_clock_xtal = false,
 };
 
 static struct twl6040_codec_data twl6040_codec = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 4f84cf9..83a9a36 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -244,7 +244,8 @@  static struct platform_device *zoom_devices[] __initdata = {
 };
 
 static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
+	.ref_clock_freq = 26000000,
+	.ref_clock_xtal = false,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 1c627da..216c2fd 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1701,6 +1701,42 @@  static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
 		},
 };
 
+static const struct wl12xx_clock wl12xx_refclock_table[] = {
+	{ 19200000,	false,	WL12XX_REFCLOCK_19	},
+	{ 26000000,	false,	WL12XX_REFCLOCK_26	},
+	{ 26000000,	true,	WL12XX_REFCLOCK_26_XTAL	},
+	{ 38400000,	false,	WL12XX_REFCLOCK_38	},
+	{ 38400000,	true,	WL12XX_REFCLOCK_38_XTAL	},
+	{ 52000000,	false,	WL12XX_REFCLOCK_52	},
+	{ 0,		false,	0 }
+};
+
+static const struct wl12xx_clock wl12xx_tcxoclock_table[] = {
+	{ 16368000,	true,	WL12XX_TCXOCLOCK_16_368	},
+	{ 16800000,	true,	WL12XX_TCXOCLOCK_16_8	},
+	{ 19200000,	true,	WL12XX_TCXOCLOCK_19_2	},
+	{ 26000000,	true,	WL12XX_TCXOCLOCK_26	},
+	{ 32736000,	true,	WL12XX_TCXOCLOCK_32_736	},
+	{ 33600000,	true,	WL12XX_TCXOCLOCK_33_6	},
+	{ 38400000,	true,	WL12XX_TCXOCLOCK_38_4	},
+	{ 52000000,	true,	WL12XX_TCXOCLOCK_52	},
+	{ 0,		false,	0 }
+};
+
+static int wl12xx_get_clock_idx(struct wl12xx_clock *table, u32 freq, bool xtal)
+{
+	int i = 0;
+
+	while(table[i].freq != 0) {
+		if ((table[i].freq == freq) &&
+		    (table[i].xtal == xtal))
+			return table[i].hw_idx;
+		i++;
+	};
+
+	return -EINVAL;
+}
+
 static int wl12xx_setup(struct wl1271 *wl)
 {
 	struct wl12xx_priv *priv = wl->priv;
@@ -1722,7 +1758,16 @@  static int wl12xx_setup(struct wl1271 *wl)
 	wl12xx_conf_init(wl);
 
 	if (!fref_param) {
-		priv->ref_clock = pdata->board_ref_clock;
+		priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
+						       pdata->ref_clock_freq,
+						       pdata->ref_clock_xtal);
+		if (priv->ref_clock < 0) {
+			wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
+				pdata->ref_clock_freq,
+				pdata->ref_clock_xtal ? "XTAL" : "not XTAL");
+
+			return priv->ref_clock;
+		}
 	} else {
 		if (!strcmp(fref_param, "19.2"))
 			priv->ref_clock = WL12XX_REFCLOCK_19;
@@ -1741,7 +1786,15 @@  static int wl12xx_setup(struct wl1271 *wl)
 	}
 
 	if (!tcxo_param) {
-		priv->tcxo_clock = pdata->board_tcxo_clock;
+		priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
+							pdata->tcxo_clock_freq,
+							true);
+		if (priv->tcxo_clock < 0) {
+			wl1271_error("Invalid tcxo_clock frequency (%d Hz)",
+				pdata->tcxo_clock_freq);
+
+			return priv->tcxo_clock;
+		}
 	} else {
 		if (!strcmp(tcxo_param, "19.2"))
 			priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 9e5484a..05f631b 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -79,4 +79,32 @@  struct wl12xx_priv {
 	struct wl127x_rx_mem_pool_addr *rx_mem_addr;
 };
 
+/* Reference clock values */
+enum {
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
+};
+
+struct wl12xx_clock {
+	u32	freq;
+	bool	xtal;
+	u8	hw_idx;
+};
+
 #endif /* __WL12XX_PRIV_H__ */
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index ab90b1c..11491ad 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -26,28 +26,6 @@ 
 
 #include <linux/err.h>
 
-/* Reference clock values */
-enum {
-	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
-	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
-	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
-	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
-};
-
-/* TCXO clock values */
-enum {
-	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
-	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
-	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
-	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
-	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
-	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
-};
-
 struct wl1251_platform_data {
 	void (*set_power)(bool enable);
 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
@@ -57,8 +35,9 @@  struct wl1251_platform_data {
 
 struct wl12xx_platform_data {
 	int irq;
-	int board_ref_clock;
-	int board_tcxo_clock;
+	int ref_clock_freq;	/* in Hertz */
+	bool ref_clock_xtal;	/* specify whether the clock is XTAL or not */
+	int tcxo_clock_freq;	/* in Hertz, tcxo is always XTAL */
 };
 
 #ifdef CONFIG_WILINK_PLATFORM_DATA