| Message ID | 1373473393-27552-1-git-send-email-rogerq@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 10 Jul 2013, Roger Quadros wrote: > Some platforms e.g. ehci-omap can generate an interrupt > (i.e. remote wakeup) even when the controller is suspended i.e. > HW_ACCESSIBLE is cleared. > > Introduce a flag "has_wakeup_irq" in struct usb_hcd to indicate > such cases. > > We tackle this case by disabling the IRQ, scheduling a > hub resume and enabling back the IRQ after the controller has > resumed. This ensures that the IRQ handler runs only after the > controller is accessible. > @@ -2248,7 +2253,21 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) > */ > local_irq_save(flags); > > - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) > + if (unlikely(HCD_DEAD(hcd))) > + rc = IRQ_NONE; > + else if (unlikely(!HCD_HW_ACCESSIBLE(hcd) && hcd->has_wakeup_irq)) { > + /* > + * We got a wakeup interrupt while the controller was > + * suspending or suspended. We can't handle it now, so > + * disable the IRQ and resume the root hub (and hence > + * the controller too). > + */ > + disable_irq_nosync(hcd->irq); > + set_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); > + usb_hcd_resume_root_hub(hcd); > + > + rc = IRQ_HANDLED; > + } else if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) > rc = IRQ_NONE; In the interest of minimizing the amount of work needed in the most common case, this should be written as: else if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { if (hcd->has_wakeup_irq) { ... } else rc = IRQ_NONE; > else if (hcd->driver->irq(hcd) == IRQ_NONE) > rc = IRQ_NONE; Apart from that, the patch is okay. When you rearrange the logic, you can add my Acked-by. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 10 Jul 2013, Roger Quadros wrote: > Some platforms e.g. ehci-omap can generate an interrupt > (i.e. remote wakeup) even when the controller is suspended i.e. > HW_ACCESSIBLE is cleared. > > Introduce a flag "has_wakeup_irq" in struct usb_hcd to indicate > such cases. > > We tackle this case by disabling the IRQ, scheduling a > hub resume and enabling back the IRQ after the controller has > resumed. This ensures that the IRQ handler runs only after the > controller is accessible. Oh yes, one more thing... > @@ -132,6 +134,7 @@ struct usb_hcd { > unsigned wireless:1; /* Wireless USB HCD */ > unsigned authorized_default:1; > unsigned has_tt:1; /* Integrated TT in root hub */ > + unsigned has_wakeup_irq:1; /* Can IRQ when suspended */ Please add a highly visible comment here, warning that has_wakeup_irq should never be set on systems with shared IRQs. Having both would ... well, it would indicate a really bad system design. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/10/2013 09:45 PM, Alan Stern wrote: > On Wed, 10 Jul 2013, Roger Quadros wrote: > >> Some platforms e.g. ehci-omap can generate an interrupt >> (i.e. remote wakeup) even when the controller is suspended i.e. >> HW_ACCESSIBLE is cleared. >> >> Introduce a flag "has_wakeup_irq" in struct usb_hcd to indicate >> such cases. >> >> We tackle this case by disabling the IRQ, scheduling a >> hub resume and enabling back the IRQ after the controller has >> resumed. This ensures that the IRQ handler runs only after the >> controller is accessible. > >> @@ -2248,7 +2253,21 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) >> */ >> local_irq_save(flags); >> >> - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) >> + if (unlikely(HCD_DEAD(hcd))) >> + rc = IRQ_NONE; >> + else if (unlikely(!HCD_HW_ACCESSIBLE(hcd) && hcd->has_wakeup_irq)) { >> + /* >> + * We got a wakeup interrupt while the controller was >> + * suspending or suspended. We can't handle it now, so >> + * disable the IRQ and resume the root hub (and hence >> + * the controller too). >> + */ >> + disable_irq_nosync(hcd->irq); >> + set_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); >> + usb_hcd_resume_root_hub(hcd); >> + >> + rc = IRQ_HANDLED; >> + } else if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) >> rc = IRQ_NONE; > > In the interest of minimizing the amount of work needed in the most > common case, this should be written as: > > else if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { > if (hcd->has_wakeup_irq) { > ... > } else > rc = IRQ_NONE; > OK. >> else if (hcd->driver->irq(hcd) == IRQ_NONE) >> rc = IRQ_NONE; > > Apart from that, the patch is okay. When you rearrange the logic, you > can add my Acked-by. > Thanks. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/10/2013 10:08 PM, Alan Stern wrote: > On Wed, 10 Jul 2013, Roger Quadros wrote: > >> Some platforms e.g. ehci-omap can generate an interrupt >> (i.e. remote wakeup) even when the controller is suspended i.e. >> HW_ACCESSIBLE is cleared. >> >> Introduce a flag "has_wakeup_irq" in struct usb_hcd to indicate >> such cases. >> >> We tackle this case by disabling the IRQ, scheduling a >> hub resume and enabling back the IRQ after the controller has >> resumed. This ensures that the IRQ handler runs only after the >> controller is accessible. > > Oh yes, one more thing... > >> @@ -132,6 +134,7 @@ struct usb_hcd { >> unsigned wireless:1; /* Wireless USB HCD */ >> unsigned authorized_default:1; >> unsigned has_tt:1; /* Integrated TT in root hub */ >> + unsigned has_wakeup_irq:1; /* Can IRQ when suspended */ > > Please add a highly visible comment here, warning that has_wakeup_irq > should never be set on systems with shared IRQs. Having both would ... > well, it would indicate a really bad system design. > OK, will do. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 014dc99..933d8f1 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2161,6 +2161,11 @@ static void hcd_resume_work(struct work_struct *work) usb_lock_device(udev); usb_remote_wakeup(udev); usb_unlock_device(udev); + if (HCD_IRQ_DISABLED(hcd)) { + /* We can now process IRQs so enable IRQ */ + clear_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); + enable_irq(hcd->irq); + } } /** @@ -2248,7 +2253,21 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) */ local_irq_save(flags); - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) + if (unlikely(HCD_DEAD(hcd))) + rc = IRQ_NONE; + else if (unlikely(!HCD_HW_ACCESSIBLE(hcd) && hcd->has_wakeup_irq)) { + /* + * We got a wakeup interrupt while the controller was + * suspending or suspended. We can't handle it now, so + * disable the IRQ and resume the root hub (and hence + * the controller too). + */ + disable_irq_nosync(hcd->irq); + set_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); + usb_hcd_resume_root_hub(hcd); + + rc = IRQ_HANDLED; + } else if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) rc = IRQ_NONE; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 1e88377..5eb9f85 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -110,6 +110,7 @@ struct usb_hcd { #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ +#define HCD_FLAG_IRQ_DISABLED 7 /* Interrupt was disabled */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -120,6 +121,7 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) +#define HCD_IRQ_DISABLED(hcd) ((hcd)->flags & (1U << HCD_FLAG_IRQ_DISABLED)) /* Flags that get set only during HCD registration or removal. */ unsigned rh_registered:1;/* is root hub registered? */ @@ -132,6 +134,7 @@ struct usb_hcd { unsigned wireless:1; /* Wireless USB HCD */ unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ + unsigned has_wakeup_irq:1; /* Can IRQ when suspended */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */
Some platforms e.g. ehci-omap can generate an interrupt (i.e. remote wakeup) even when the controller is suspended i.e. HW_ACCESSIBLE is cleared. Introduce a flag "has_wakeup_irq" in struct usb_hcd to indicate such cases. We tackle this case by disabling the IRQ, scheduling a hub resume and enabling back the IRQ after the controller has resumed. This ensures that the IRQ handler runs only after the controller is accessible. Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/core/hcd.c | 21 ++++++++++++++++++++- include/linux/usb/hcd.h | 3 +++ 2 files changed, 23 insertions(+), 1 deletions(-)