new file mode 100644
@@ -0,0 +1,45 @@
+Binding for Texas Instruments interface clock.
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+
+Required properties:
+- compatible : shall be "ti,interface-clock"
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- ti,enable-bit : bit shift for the bit enabling/disabling the clock
+ (default 0)
+- ti,iclk-no-wait : flag for selecting non-waiting hw-ops
+- ti,iclk-hsotgusb : flag for selecting hsotgusb hw-ops
+- ti,iclk-dss : flag for selecting DSS interface clock hw-ops
+- ti,iclk-ssi : flag for selecting SSI interface clock hw-ops
+- ti,am35xx-clk : flag for selecting AM35xx interface clock hw-ops
+- ti,clkdm-name : parent clockdomain name
+
+Examples:
+ aes1_ick: aes1_ick@48004a14 {
+ #clock-cells = <0>;
+ compatible = "ti,interface-clock";
+ clocks = <&security_l4_ick2>;
+ reg = <0x48004a14 0x4>;
+ ti,enable-bit = <3>;
+ };
+
+ cam_ick: cam_ick@48004f10 {
+ #clock-cells = <0>;
+ compatible = "ti,interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x48004f10 0x4>;
+ ti,clkdm-name = "cam_clkdm";
+ ti,enable-bit = <0>;
+ ti,iclk-no-wait;
+ };
@@ -285,14 +285,8 @@ extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
extern struct clk dummy_ck;
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
@@ -1,5 +1,5 @@
ifneq ($(CONFIG_OF),)
obj-y += clk.o dpll.o autoidle.o gate.o \
apll.o clk-44xx.o clk-54xx.o \
- clk-7xx.o clk-33xx.o
+ clk-7xx.o clk-33xx.o interface.o
endif
new file mode 100644
@@ -0,0 +1,105 @@
+/*
+ * OMAP interface clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+static const struct clk_ops omap_interface_clk_ops = {
+ .init = &omap2_init_clk_clkdm,
+ .enable = &omap2_dflt_clk_enable,
+ .disable = &omap2_dflt_clk_disable,
+ .is_enabled = &omap2_dflt_clk_is_enabled,
+};
+
+void __init of_omap_interface_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_init_data init = { 0 };
+ struct clk_hw_omap *clk_hw;
+ const char *clk_name = node->name;
+ int num_parents;
+ const char **parent_names = NULL;
+ int i;
+ u32 val;
+
+ clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ if (!clk_hw) {
+ pr_err("%s: could not allocate clk_hw_omap\n", __func__);
+ return;
+ }
+
+ clk_hw->hw.init = &init;
+ clk_hw->ops = &clkhwops_iclk_wait;
+ clk_hw->enable_reg = of_iomap(node, 0);
+
+ if (!of_property_read_u32(node, "ti,enable-bit", &val))
+ clk_hw->enable_bit = val;
+
+ if (of_property_read_bool(node, "ti,iclk-no-wait"))
+ clk_hw->ops = &clkhwops_iclk;
+
+ if (of_property_read_bool(node, "ti,iclk-hsotgusb"))
+ clk_hw->ops = &clkhwops_omap3430es2_iclk_hsotgusb_wait;
+
+ if (of_property_read_bool(node, "ti,iclk-dss"))
+ clk_hw->ops = &clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+
+ if (of_property_read_bool(node, "ti,iclk-ssi"))
+ clk_hw->ops = &clkhwops_omap3430es2_iclk_ssi_wait;
+
+ if (of_property_read_bool(node, "ti,am35xx-clk"))
+ clk_hw->ops = &clkhwops_am35xx_ipss_wait;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ of_property_read_string(node, "ti,clkdm-name", &clk_hw->clkdm_name);
+
+ init.name = clk_name;
+ init.ops = &omap_interface_clk_ops;
+ init.flags = 0;
+
+ num_parents = of_clk_get_parent_count(node);
+ if (num_parents < 1) {
+ pr_err("%s: omap interface_clk %s must have parent(s)\n",
+ __func__, node->name);
+ goto cleanup;
+ }
+
+ parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(node, i);
+
+ init.num_parents = num_parents;
+ init.parent_names = parent_names;
+
+ clk = clk_register(NULL, &clk_hw->hw);
+
+ if (!IS_ERR(clk)) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ omap2_init_clk_hw_omap_clocks(clk);
+ return;
+ }
+
+cleanup:
+ kfree(parent_names);
+ kfree(clk_hw);
+}
+CLK_OF_DECLARE(omap_interface_clk, "ti,interface-clock",
+ of_omap_interface_clk_setup);
@@ -204,5 +204,12 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
#endif
OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/clock/ti/interface.txt | 45 +++++++++ arch/arm/mach-omap2/clock.h | 6 -- drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/interface.c | 105 ++++++++++++++++++++ include/linux/clk/ti.h | 7 ++ 5 files changed, 158 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt create mode 100644 drivers/clk/ti/interface.c