| Message ID | 1376521969-16807-3-git-send-email-joelf@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: > When DEBUG is enabled, these macros can be used to print variables > in integer and hex format, and clearly display which registers, > offsets and values are being read/written , including printing the > names of the offsets and their values. [] > diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c [] > @@ -15,6 +15,14 @@ > > #define pr_fmt(fmt) "%s: " fmt, __func__ > > +#ifdef DEBUG > +#define prn(num) printk(#num "=%d\n", num) > +#define prx(num) printk(#num "=%x\n", num) pr_debug? > +#else > +#define prn(num) do { } while (0) > +#define prx(num) do { } while (0) > +#endif [] > @@ -172,13 +180,35 @@ struct omap_aes_dev { > static LIST_HEAD(dev_list); > static DEFINE_SPINLOCK(list_lock); > > +#ifdef DEBUG > +#define omap_aes_read(dd, offset) \ > + do { \ > + omap_aes_read_1(dd, offset); \ > + pr_debug("omap_aes_read(" #offset ")\n"); \ > + } while (0) > + > +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) > +#else > static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) > +#endif > { > return __raw_readl(dd->io_base + offset); > } > > +#ifdef DEBUG > +#define omap_aes_write(dd, offset, value) \ > + do { \ > + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ > + offset, value); \ > + omap_aes_write_1(dd, offset, value); \ > + } while (0) > + > +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, > + u32 value) > +#else > static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, > u32 value) > +#endif > { > __raw_writel(value, dd->io_base + offset); > } Umm, yuck? Is there any real value in read_1 and write_1? -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/14/2013 06:29 PM, Joe Perches wrote: > On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: >> When DEBUG is enabled, these macros can be used to print variables >> in integer and hex format, and clearly display which registers, >> offsets and values are being read/written , including printing the >> names of the offsets and their values. > [] >> diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c > [] >> @@ -15,6 +15,14 @@ >> >> #define pr_fmt(fmt) "%s: " fmt, __func__ >> >> +#ifdef DEBUG >> +#define prn(num) printk(#num "=%d\n", num) >> +#define prx(num) printk(#num "=%x\n", num) > > pr_debug? Sure, can change that. >> +#else >> +#define prn(num) do { } while (0) >> +#define prx(num) do { } while (0) >> +#endif > [] >> @@ -172,13 +180,35 @@ struct omap_aes_dev { >> static LIST_HEAD(dev_list); >> static DEFINE_SPINLOCK(list_lock); >> >> +#ifdef DEBUG >> +#define omap_aes_read(dd, offset) \ >> + do { \ >> + omap_aes_read_1(dd, offset); \ >> + pr_debug("omap_aes_read(" #offset ")\n"); \ >> + } while (0) >> + >> +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) >> +#else >> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) >> +#endif >> { >> return __raw_readl(dd->io_base + offset); >> } >> >> +#ifdef DEBUG >> +#define omap_aes_write(dd, offset, value) \ >> + do { \ >> + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ >> + offset, value); \ >> + omap_aes_write_1(dd, offset, value); \ >> + } while (0) >> + >> +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, >> + u32 value) >> +#else >> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, >> u32 value) >> +#endif >> { >> __raw_writel(value, dd->io_base + offset); >> } > > Umm, yuck? > > Is there any real value in read_1 and write_1? Can you be more descriptive? There is a lot of value in them for debug to show clearly sequence of read/writes. Moreover, they are no-op'd when DEBUG is disabled. Other than the obvious use, I guess it could be rewritten to be bit cleaner. I can do that. -Joel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2013-08-14 at 18:40 -0500, Joel Fernandes wrote: > On 08/14/2013 06:29 PM, Joe Perches wrote: > > On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: > >> When DEBUG is enabled, these macros can be used to print variables > >> in integer and hex format, and clearly display which registers, > >> offsets and values are being read/written , including printing the > >> names of the offsets and their values. > > [] > >> diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c > > [] > >> @@ -15,6 +15,14 @@ > >> > >> #define pr_fmt(fmt) "%s: " fmt, __func__ > >> > >> +#ifdef DEBUG > >> +#define prn(num) printk(#num "=%d\n", num) > >> +#define prx(num) printk(#num "=%x\n", num) > > > > pr_debug? > > Sure, can change that. > > >> +#else > >> +#define prn(num) do { } while (0) > >> +#define prx(num) do { } while (0) > >> +#endif > > [] > >> @@ -172,13 +180,35 @@ struct omap_aes_dev { > >> static LIST_HEAD(dev_list); > >> static DEFINE_SPINLOCK(list_lock); > >> > >> +#ifdef DEBUG > >> +#define omap_aes_read(dd, offset) \ > >> + do { \ > >> + omap_aes_read_1(dd, offset); \ > >> + pr_debug("omap_aes_read(" #offset ")\n"); \ > >> + } while (0) > >> + > >> +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) > >> +#else > >> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) > >> +#endif > >> { > >> return __raw_readl(dd->io_base + offset); > >> } > >> > >> +#ifdef DEBUG > >> +#define omap_aes_write(dd, offset, value) \ > >> + do { \ > >> + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ > >> + offset, value); \ > >> + omap_aes_write_1(dd, offset, value); \ > >> + } while (0) > >> + > >> +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, > >> + u32 value) > >> +#else > >> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, > >> u32 value) > >> +#endif > >> { > >> __raw_writel(value, dd->io_base + offset); > >> } > > > > Umm, yuck? > > > > Is there any real value in read_1 and write_1? > > Can you be more descriptive? There is a lot of value in them for debug > to show clearly sequence of read/writes. Moreover, they are no-op'd when > DEBUG is disabled. pr_debug is no-op'd when DEBUG is not #defined. so just use a single omap_aes_write(...) { pr_debug(...) __raw_writel(...); } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/14/2013 07:47 PM, Joe Perches wrote: > On Wed, 2013-08-14 at 18:40 -0500, Joel Fernandes wrote: >> On 08/14/2013 06:29 PM, Joe Perches wrote: >>> On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: >>>> When DEBUG is enabled, these macros can be used to print variables >>>> in integer and hex format, and clearly display which registers, >>>> offsets and values are being read/written , including printing the >>>> names of the offsets and their values. >>> [] >>>> diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c >>> [] >>>> @@ -15,6 +15,14 @@ >>>> >>>> #define pr_fmt(fmt) "%s: " fmt, __func__ >>>> >>>> +#ifdef DEBUG >>>> +#define prn(num) printk(#num "=%d\n", num) >>>> +#define prx(num) printk(#num "=%x\n", num) >>> >>> pr_debug? >> >> Sure, can change that. >> >>>> +#else >>>> +#define prn(num) do { } while (0) >>>> +#define prx(num) do { } while (0) >>>> +#endif >>> [] >>>> @@ -172,13 +180,35 @@ struct omap_aes_dev { >>>> static LIST_HEAD(dev_list); >>>> static DEFINE_SPINLOCK(list_lock); >>>> >>>> +#ifdef DEBUG >>>> +#define omap_aes_read(dd, offset) \ >>>> + do { \ >>>> + omap_aes_read_1(dd, offset); \ >>>> + pr_debug("omap_aes_read(" #offset ")\n"); \ >>>> + } while (0) >>>> + >>>> +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) >>>> +#else >>>> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) >>>> +#endif >>>> { >>>> return __raw_readl(dd->io_base + offset); >>>> } >>>> >>>> +#ifdef DEBUG >>>> +#define omap_aes_write(dd, offset, value) \ >>>> + do { \ >>>> + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ >>>> + offset, value); \ >>>> + omap_aes_write_1(dd, offset, value); \ >>>> + } while (0) >>>> + >>>> +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, >>>> + u32 value) >>>> +#else >>>> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, >>>> u32 value) >>>> +#endif >>>> { >>>> __raw_writel(value, dd->io_base + offset); >>>> } >>> >>> Umm, yuck? >>> >>> Is there any real value in read_1 and write_1? >> >> Can you be more descriptive? There is a lot of value in them for debug >> to show clearly sequence of read/writes. Moreover, they are no-op'd when >> DEBUG is disabled. > > pr_debug is no-op'd when DEBUG is not #defined. > so just use a single > > omap_aes_write(...) > { > pr_debug(...) > __raw_writel(...); > } Actually this doesn't work, as the pr_debug cannot print the name of the offset as my original patch set does using "#offset". There are many places where named offsets are used to pass to read/write, and this macro helps to visually see which offset is being written to by name. So the original patch would stand in its current form except for a small rewrite of the write debug part of it as follows to be cleaner getting rid of the _1. For the read , we still need it as we need to return the value from a function which cannot be done in a macro. So the new patch would look something like this: #ifdef DEBUG #define omap_aes_read(dd, offset) \ omap_aes_read_1(dd, offset); \ pr_debug("omap_aes_read(" #offset ")\n"); static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) #else static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) #endif { return __raw_readl(dd->io_base + offset); } #ifdef DEBUG #define omap_aes_write(dd, offset, value) \ do { \ pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ offset, value); \ __raw_writel(value, dd->io_base + offset); \ } while (0) #else static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, u32 value) { __raw_writel(value, dd->io_base + offset); } #endif Thanks, -Joel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 15/08/13 06:12, Joel Fernandes wrote: > On 08/14/2013 07:47 PM, Joe Perches wrote: >> On Wed, 2013-08-14 at 18:40 -0500, Joel Fernandes wrote: >>> On 08/14/2013 06:29 PM, Joe Perches wrote: >>>> On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: >>>>> When DEBUG is enabled, these macros can be used to print variables >>>>> in integer and hex format, and clearly display which registers, >>>>> offsets and values are being read/written , including printing the >>>>> names of the offsets and their values. >>>> [] >>>>> diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c >>>> [] >>>>> @@ -15,6 +15,14 @@ >>>>> >>>>> #define pr_fmt(fmt) "%s: " fmt, __func__ >>>>> >>>>> +#ifdef DEBUG >>>>> +#define prn(num) printk(#num "=%d\n", num) >>>>> +#define prx(num) printk(#num "=%x\n", num) >>>> pr_debug? >>> Sure, can change that. >>> >>>>> +#else >>>>> +#define prn(num) do { } while (0) >>>>> +#define prx(num) do { } while (0) >>>>> +#endif >>>> [] >>>>> @@ -172,13 +180,35 @@ struct omap_aes_dev { >>>>> static LIST_HEAD(dev_list); >>>>> static DEFINE_SPINLOCK(list_lock); >>>>> >>>>> +#ifdef DEBUG >>>>> +#define omap_aes_read(dd, offset) \ >>>>> + do { \ >>>>> + omap_aes_read_1(dd, offset); \ >>>>> + pr_debug("omap_aes_read(" #offset ")\n"); \ >>>>> + } while (0) >>>>> + >>>>> +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) >>>>> +#else >>>>> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) >>>>> +#endif >>>>> { >>>>> return __raw_readl(dd->io_base + offset); >>>>> } >>>>> >>>>> +#ifdef DEBUG >>>>> +#define omap_aes_write(dd, offset, value) \ >>>>> + do { \ >>>>> + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ >>>>> + offset, value); \ >>>>> + omap_aes_write_1(dd, offset, value); \ >>>>> + } while (0) >>>>> + >>>>> +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, >>>>> + u32 value) >>>>> +#else >>>>> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, >>>>> u32 value) >>>>> +#endif >>>>> { >>>>> __raw_writel(value, dd->io_base + offset); >>>>> } >>>> Umm, yuck? >>>> >>>> Is there any real value in read_1 and write_1? >>> Can you be more descriptive? There is a lot of value in them for debug >>> to show clearly sequence of read/writes. Moreover, they are no-op'd when >>> DEBUG is disabled. >> pr_debug is no-op'd when DEBUG is not #defined. >> so just use a single >> >> omap_aes_write(...) >> { >> pr_debug(...) >> __raw_writel(...); >> } > Actually this doesn't work, as the pr_debug cannot print the name of the > offset as my original patch set does using "#offset". > > There are many places where named offsets are used to pass to > read/write, and this macro helps to visually see which offset is being > written to by name. > > So the original patch would stand in its current form except for a small > rewrite of the write debug part of it as follows to be cleaner getting > rid of the _1. For the read , we still need it as we need to return the > value from a function which cannot be done in a macro. > > So the new patch would look something like this: > > #ifdef DEBUG > #define omap_aes_read(dd, offset) \ > omap_aes_read_1(dd, offset); \ > pr_debug("omap_aes_read(" #offset ")\n"); > static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) > #else > static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) > #endif > { > return __raw_readl(dd->io_base + offset); > } Bellow version "write" looks much more readable - never re-define function signature by macro. Above should be similar as well... > #ifdef DEBUG > #define omap_aes_write(dd, offset, value) \ > do { \ > pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ > offset, value); \ > __raw_writel(value, dd->io_base + offset); \ > } while (0) > #else > static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, > u32 value) > { > __raw_writel(value, dd->io_base + offset); > } > #endif > > > Thanks, > > -Joel > -- > To unsubscribe from this list: send the line "unsubscribe linux-crypto" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/15/2013 01:23 AM, Dmitry Kasatkin wrote: > On 15/08/13 06:12, Joel Fernandes wrote: >> On 08/14/2013 07:47 PM, Joe Perches wrote: >>> On Wed, 2013-08-14 at 18:40 -0500, Joel Fernandes wrote: >>>> On 08/14/2013 06:29 PM, Joe Perches wrote: >>>>> On Wed, 2013-08-14 at 18:12 -0500, Joel Fernandes wrote: >>>>>> When DEBUG is enabled, these macros can be used to print variables >>>>>> in integer and hex format, and clearly display which registers, >>>>>> offsets and values are being read/written , including printing the >>>>>> names of the offsets and their values. >>>>> [] >>>>>> diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c >>>>> [] >>>>>> @@ -15,6 +15,14 @@ >>>>>> >>>>>> #define pr_fmt(fmt) "%s: " fmt, __func__ >>>>>> >>>>>> +#ifdef DEBUG >>>>>> +#define prn(num) printk(#num "=%d\n", num) >>>>>> +#define prx(num) printk(#num "=%x\n", num) >>>>> pr_debug? >>>> Sure, can change that. >>>> >>>>>> +#else >>>>>> +#define prn(num) do { } while (0) >>>>>> +#define prx(num) do { } while (0) >>>>>> +#endif >>>>> [] >>>>>> @@ -172,13 +180,35 @@ struct omap_aes_dev { >>>>>> static LIST_HEAD(dev_list); >>>>>> static DEFINE_SPINLOCK(list_lock); >>>>>> >>>>>> +#ifdef DEBUG >>>>>> +#define omap_aes_read(dd, offset) \ >>>>>> + do { \ >>>>>> + omap_aes_read_1(dd, offset); \ >>>>>> + pr_debug("omap_aes_read(" #offset ")\n"); \ >>>>>> + } while (0) >>>>>> + >>>>>> +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) >>>>>> +#else >>>>>> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) >>>>>> +#endif >>>>>> { >>>>>> return __raw_readl(dd->io_base + offset); >>>>>> } >>>>>> >>>>>> +#ifdef DEBUG >>>>>> +#define omap_aes_write(dd, offset, value) \ >>>>>> + do { \ >>>>>> + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ >>>>>> + offset, value); \ >>>>>> + omap_aes_write_1(dd, offset, value); \ >>>>>> + } while (0) >>>>>> + >>>>>> +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, >>>>>> + u32 value) >>>>>> +#else >>>>>> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, >>>>>> u32 value) >>>>>> +#endif >>>>>> { >>>>>> __raw_writel(value, dd->io_base + offset); >>>>>> } >>>>> Umm, yuck? >>>>> >>>>> Is there any real value in read_1 and write_1? >>>> Can you be more descriptive? There is a lot of value in them for debug >>>> to show clearly sequence of read/writes. Moreover, they are no-op'd when >>>> DEBUG is disabled. >>> pr_debug is no-op'd when DEBUG is not #defined. >>> so just use a single >>> >>> omap_aes_write(...) >>> { >>> pr_debug(...) >>> __raw_writel(...); >>> } >> Actually this doesn't work, as the pr_debug cannot print the name of the >> offset as my original patch set does using "#offset". >> >> There are many places where named offsets are used to pass to >> read/write, and this macro helps to visually see which offset is being >> written to by name. >> >> So the original patch would stand in its current form except for a small >> rewrite of the write debug part of it as follows to be cleaner getting >> rid of the _1. For the read , we still need it as we need to return the >> value from a function which cannot be done in a macro. >> >> So the new patch would look something like this: >> >> #ifdef DEBUG >> #define omap_aes_read(dd, offset) \ >> omap_aes_read_1(dd, offset); \ >> pr_debug("omap_aes_read(" #offset ")\n"); >> static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) >> #else >> static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) >> #endif >> { >> return __raw_readl(dd->io_base + offset); >> } > > Bellow version "write" looks much more readable - never re-define > function signature by macro. > Above should be similar as well... Yes, I'll write the read in the final version of this patch like the write. Its certainly cleaner. -Joel >> #ifdef DEBUG >> #define omap_aes_write(dd, offset, value) \ >> do { \ >> pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ >> offset, value); \ >> __raw_writel(value, dd->io_base + offset); \ >> } while (0) >> #else >> static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, >> u32 value) >> { >> __raw_writel(value, dd->io_base + offset); >> } >> #endif > >> >> >> Thanks, >> >> -Joel >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-crypto" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index ee15b0f..3838e0a 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -15,6 +15,14 @@ #define pr_fmt(fmt) "%s: " fmt, __func__ +#ifdef DEBUG +#define prn(num) printk(#num "=%d\n", num) +#define prx(num) printk(#num "=%x\n", num) +#else +#define prn(num) do { } while (0) +#define prx(num) do { } while (0) +#endif + #include <linux/err.h> #include <linux/module.h> #include <linux/init.h> @@ -172,13 +180,35 @@ struct omap_aes_dev { static LIST_HEAD(dev_list); static DEFINE_SPINLOCK(list_lock); +#ifdef DEBUG +#define omap_aes_read(dd, offset) \ + do { \ + omap_aes_read_1(dd, offset); \ + pr_debug("omap_aes_read(" #offset ")\n"); \ + } while (0) + +static inline u32 omap_aes_read_1(struct omap_aes_dev *dd, u32 offset) +#else static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) +#endif { return __raw_readl(dd->io_base + offset); } +#ifdef DEBUG +#define omap_aes_write(dd, offset, value) \ + do { \ + pr_debug("omap_aes_write(" #offset "=%x) value=%d\n", \ + offset, value); \ + omap_aes_write_1(dd, offset, value); \ + } while (0) + +static inline void omap_aes_write_1(struct omap_aes_dev *dd, u32 offset, + u32 value) +#else static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, u32 value) +#endif { __raw_writel(value, dd->io_base + offset); }
When DEBUG is enabled, these macros can be used to print variables in integer and hex format, and clearly display which registers, offsets and values are being read/written , including printing the names of the offsets and their values. Signed-off-by: Joel Fernandes <joelf@ti.com> --- drivers/crypto/omap-aes.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)