diff mbox

[v3,6/6] experimental: arm: dts: dra7xx: Add a DT node for VPE

Message ID 1377779572-22624-7-git-send-email-archit@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

archit taneja Aug. 29, 2013, 12:32 p.m. UTC
Add a DT node for VPE in dra7.dtsi. This is experimental because we might need
to split the VPE address space a bit more, and also because the IRQ line
described is accessible the IRQ crossbar driver is added for DRA7XX.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Sricharan R <r.sricharan@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..7c1cbfe 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -484,6 +484,17 @@ 
 			dmas = <&sdma 70>, <&sdma 71>;
 			dma-names = "tx0", "rx0";
 		};
+
+		vpe {
+			compatible = "ti,vpe";
+			ti,hwmods = "vpe";
+			reg = <0x489d0000 0xd000>, <0x489dd000 0x400>;
+			reg-names = "vpe", "vpdma";
+			interrupts = <0 158 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 	};
 
 	clocks {