| Message ID | 1382212448-31094-2-git-send-email-eballetbo@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Enric, On Sat, Oct 19, 2013 at 9:54 PM, Enric Balletbo i Serra <eballetbo@gmail.com> wrote: > Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and > do not mux data pins from mmc1_data5 to mmc1_data7. > I guess you meant pins from mmc1_data4 instead mmc1_data5? (i.e: only data0 to data3 have to be mux'ed for bus-width = <4>). > Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> > --- > arch/arm/boot/dts/omap3-igep.dtsi | 6 +----- > 1 file changed, 1 insertion(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi > index ba1e58b..d4fecce 100644 > --- a/arch/arm/boot/dts/omap3-igep.dtsi > +++ b/arch/arm/boot/dts/omap3-igep.dtsi > @@ -65,10 +65,6 @@ > 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ > 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ > 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ > - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ > - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ > - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ > - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ > >; > }; > > @@ -114,7 +110,7 @@ > pinctrl-0 = <&mmc1_pins>; > vmmc-supply = <&vmmc1>; > vmmc_aux-supply = <&vsim>; > - bus-width = <8>; > + bus-width = <4>; > }; > > &mmc2 { > -- > 1.8.1.2 > Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b..d4fecce 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -65,10 +65,6 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ >; }; @@ -114,7 +110,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 {
Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and do not mux data pins from mmc1_data5 to mmc1_data7. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> --- arch/arm/boot/dts/omap3-igep.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)