diff mbox

[PATCHv5,11/20] arm: dts: add omap4460 thermal data

Message ID 1384285582-16933-12-git-send-email-eduardo.valentin@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Eduardo Valentin Nov. 12, 2013, 7:46 p.m. UTC
This patch changes the dtsi entry on omap4460 to contain
the thermal data. This data will enable the passive
cooling with CPUfreq cooling device at 100C and the
system will do a thermal shutdown at 125C.

Cc: "BenoƮt Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/boot/dts/omap4460.dtsi | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index c2f0f39..4d93aba 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -12,7 +12,7 @@ 
 / {
 	cpus {
 		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
-		cpu@0 {
+		cpu0: cpu@0 {
 			operating-points = <
 				/* kHz    uV */
 				350000  1025000
@@ -30,12 +30,18 @@ 
 		ti,hwmods = "debugss";
 	};
 
-	bandgap {
+	thermal-zones{
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	bandgap: bandgap {
 		reg = <0x4a002260 0x4
 		       0x4a00232C 0x4
 		       0x4a002378 0x18>;
 		compatible = "ti,omap4460-bandgap";
 		interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
 		gpios = <&gpio3 22 0>; /* tshut */
+
+		#thermal-sensor-cells = <0>;
 	};
 };