| Message ID | 1387452260-23276-8-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Tero Kristo <t-kristo@ti.com> [131219 03:26]: > Divider clock can now be registered to use low level register access ops. > Preferred initialization method is via clock description. This seems to make omap2 not boot for me. No output whatsoever even with DEBUG_LL and earlyprintk. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/19/2013 08:26 PM, Tony Lindgren wrote: > * Tero Kristo <t-kristo@ti.com> [131219 03:26]: >> Divider clock can now be registered to use low level register access ops. >> Preferred initialization method is via clock description. > > This seems to make omap2 not boot for me. No output whatsoever even with > DEBUG_LL and earlyprintk. Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken... -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 20 December 2013 12:32 AM, Tero Kristo wrote: > On 12/19/2013 08:26 PM, Tony Lindgren wrote: >> * Tero Kristo <t-kristo@ti.com> [131219 03:26]: >>> Divider clock can now be registered to use low level register access ops. >>> Preferred initialization method is via clock description. >> >> This seems to make omap2 not boot for me. No output whatsoever even with >> DEBUG_LL and earlyprintk. > > Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken... I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is what I see [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2 [ 0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000 [ 0.000000] PC is at clk_mux_get_parent+0x14/0xcc [ 0.000000] LR is at clk_mux_get_parent+0x10/0xcc [ 0.000000] pc : [<c044a234>] lr : [<c044a230>] psr: a00001d3 [ 0.000000] sp : c07d5f40 ip : 00000000 fp : 00000000 [ 0.000000] r10: c07dc880 r9 : 4107b366 r8 : c07f46a4 [ 0.000000] r7 : c0edfa80 r6 : ffffffff r5 : c07f6810 r4 : 00000002 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : c069da67 r0 : 00000002 [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 00c5387d Table: 80004000 DAC: 00000017 [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248) [ 0.000000] Stack: (0xc07d5f40 to 0xc07d6000) [ 0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368 [ 0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380 [ 0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff [ 0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974 [ 0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d [ 0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000 [ 0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0) [ 0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48) [ 0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124) [ 0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30) [ 0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) [ 0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30) [ 0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360) [ 0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074) [ 0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! I'll try and debug further but any quick thoughts on what could be wrong? > > -Tero > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/20/2013 12:07 PM, Rajendra Nayak wrote: > On Friday 20 December 2013 12:32 AM, Tero Kristo wrote: >> On 12/19/2013 08:26 PM, Tony Lindgren wrote: >>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]: >>>> Divider clock can now be registered to use low level register access ops. >>>> Preferred initialization method is via clock description. >>> >>> This seems to make omap2 not boot for me. No output whatsoever even with >>> DEBUG_LL and earlyprintk. >> >> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken... > > I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is > what I see > > [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 > [ 0.000000] pgd = c0004000 > [ 0.000000] [00000000] *pgd=00000000 > [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM > [ 0.000000] Modules linked in: > [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2 > [ 0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000 > [ 0.000000] PC is at clk_mux_get_parent+0x14/0xcc > [ 0.000000] LR is at clk_mux_get_parent+0x10/0xcc > [ 0.000000] pc : [<c044a234>] lr : [<c044a230>] psr: a00001d3 > [ 0.000000] sp : c07d5f40 ip : 00000000 fp : 00000000 > [ 0.000000] r10: c07dc880 r9 : 4107b366 r8 : c07f46a4 > [ 0.000000] r7 : c0edfa80 r6 : ffffffff r5 : c07f6810 r4 : 00000002 > [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : c069da67 r0 : 00000002 > [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel > [ 0.000000] Control: 00c5387d Table: 80004000 DAC: 00000017 > [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248) > [ 0.000000] Stack: (0xc07d5f40 to 0xc07d6000) > [ 0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368 > [ 0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380 > [ 0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff > [ 0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974 > [ 0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d > [ 0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000 > [ 0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0) > [ 0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48) > [ 0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124) > [ 0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30) > [ 0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) > [ 0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30) > [ 0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360) > [ 0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074) > [ 0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000) > [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- > [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! > > I'll try and debug further but any quick thoughts on what could be wrong? I have a fix for this already and will be posting v12 today. I will just re-post the drivers/clk part of the series though, rest of the patches should be fine. This bug was silly actually, I didn't think of the static clock data initialization through the macros from clk-private.h... This caused the resulting clock structures to have NULL for clk_ll_ops as it bypassed the init function where I set it up. So, I will need to check against NULL every time I do anything with ll_ops. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 20 December 2013 03:59 PM, Tero Kristo wrote: > On 12/20/2013 12:07 PM, Rajendra Nayak wrote: >> On Friday 20 December 2013 12:32 AM, Tero Kristo wrote: >>> On 12/19/2013 08:26 PM, Tony Lindgren wrote: >>>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]: >>>>> Divider clock can now be registered to use low level register access ops. >>>>> Preferred initialization method is via clock description. >>>> >>>> This seems to make omap2 not boot for me. No output whatsoever even with >>>> DEBUG_LL and earlyprintk. >>> >>> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken... >> >> I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is >> what I see >> >> [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 >> [ 0.000000] pgd = c0004000 >> [ 0.000000] [00000000] *pgd=00000000 >> [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM >> [ 0.000000] Modules linked in: >> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2 >> [ 0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000 >> [ 0.000000] PC is at clk_mux_get_parent+0x14/0xcc >> [ 0.000000] LR is at clk_mux_get_parent+0x10/0xcc >> [ 0.000000] pc : [<c044a234>] lr : [<c044a230>] psr: a00001d3 >> [ 0.000000] sp : c07d5f40 ip : 00000000 fp : 00000000 >> [ 0.000000] r10: c07dc880 r9 : 4107b366 r8 : c07f46a4 >> [ 0.000000] r7 : c0edfa80 r6 : ffffffff r5 : c07f6810 r4 : 00000002 >> [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : c069da67 r0 : 00000002 >> [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel >> [ 0.000000] Control: 00c5387d Table: 80004000 DAC: 00000017 >> [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248) >> [ 0.000000] Stack: (0xc07d5f40 to 0xc07d6000) >> [ 0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368 >> [ 0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380 >> [ 0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff >> [ 0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974 >> [ 0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d >> [ 0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000 >> [ 0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0) >> [ 0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48) >> [ 0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124) >> [ 0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30) >> [ 0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) >> [ 0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30) >> [ 0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360) >> [ 0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074) >> [ 0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000) >> [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- >> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! >> >> I'll try and debug further but any quick thoughts on what could be wrong? > > I have a fix for this already and will be posting v12 today. I will just re-post the drivers/clk part of the series though, rest of the patches should be fine. > > This bug was silly actually, I didn't think of the static clock data initialization through the macros from clk-private.h... This caused the resulting clock structures to have NULL for clk_ll_ops as it bypassed the init function where I set it up. So, I will need to check against NULL every time I do anything with ll_ops. yeah, the crash was indeed when ll_ops was dereferenced despite being NULL. > > -Tero > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Rajendra Nayak <rnayak@ti.com> [131220 02:40]: > > yeah, the crash was indeed when ll_ops was dereferenced despite being NULL. Might be also worth checking if the gate and mux patches have a similar issue. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/20/2013 06:16 PM, Tony Lindgren wrote: > * Rajendra Nayak <rnayak@ti.com> [131220 02:40]: >> >> yeah, the crash was indeed when ll_ops was dereferenced despite being NULL. > > Might be also worth checking if the gate and mux patches have a similar issue. Yea they had and I fixed those. v12 coming out right after this email. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 8cfed5c..61ab30e 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -108,7 +108,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, struct clk_divider *divider = to_clk_divider(hw); unsigned int div, val; - val = clk_readl(divider->reg) >> divider->shift; + val = divider->ll_ops->clk_readl(divider->reg) >> divider->shift; val &= div_mask(divider); div = _get_div(divider, val); @@ -234,11 +234,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, if (divider->flags & CLK_DIVIDER_HIWORD_MASK) { val = div_mask(divider) << (divider->shift + 16); } else { - val = clk_readl(divider->reg); + val = divider->ll_ops->clk_readl(divider->reg); val &= ~(div_mask(divider) << divider->shift); } val |= value << divider->shift; - clk_writel(val, divider->reg); + divider->ll_ops->clk_writel(val, divider->reg); if (divider->lock) spin_unlock_irqrestore(divider->lock, flags); @@ -291,6 +291,7 @@ static struct clk *_register_divider(struct device *dev, const char *name, div->lock = lock; div->hw.init = &init; div->table = table; + div->ll_ops = &clk_ll_ops_default; /* register the clock */ clk = clk_register(dev, &div->hw); @@ -368,6 +369,10 @@ struct clk_hw *clk_register_divider_desc(struct device *dev, divider->flags = hw_desc->flags; divider->table = hw_desc->table; divider->lock = hw_desc->lock; + divider->ll_ops = hw_desc->ll_ops; + + if (!divider->ll_ops) + divider->ll_ops = &clk_ll_ops_default; if (!desc->ops) desc->ops = &clk_divider_ops; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index cc5bee0..3a88346 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -320,6 +320,7 @@ struct clk_div_table { * * @hw: handle between common and hardware-specific interfaces * @reg: register containing the divider + * @ll_ops: low-level ops for accessing the register * @shift: shift to the divider bit field * @width: width of the divider bit field * @table: array of value/divider pairs, last entry should have div = 0 @@ -348,6 +349,7 @@ struct clk_div_table { struct clk_divider { struct clk_hw hw; void __iomem *reg; + struct clk_ll_ops *ll_ops; u8 shift; u8 width; u8 flags; @@ -360,6 +362,7 @@ struct clk_divider { * * @desc: handle between common and hardware-specific interfaces * @reg: register containing the divider + * @ll_ops: low-level ops for accessing the register * @shift: shift to the divider bit field * @width: width of the divider bit field * @table: array of value/divider pairs, last entry should have div = 0 @@ -368,6 +371,7 @@ struct clk_divider { struct clk_divider_desc { struct clk_desc desc; void __iomem *reg; + struct clk_ll_ops *ll_ops; u8 shift; u8 width; u8 flags;
Divider clock can now be registered to use low level register access ops. Preferred initialization method is via clock description. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- drivers/clk/clk-divider.c | 11 ++++++++--- include/linux/clk-provider.h | 4 ++++ 2 files changed, 12 insertions(+), 3 deletions(-)