Message ID | 1393077576-25730-1-git-send-email-javier.martinez@collabora.co.uk (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Tony, On Sat, Feb 22, 2014 at 10:59 AM, Javier Martinez Canillas <javier.martinez@collabora.co.uk> wrote: > This patch is based on commit: > > 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree") > > and fixes a boot hang due the IGEP board being wrongly initialized > as an OMAP3430 platform instead of an OMAP3630. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > --- > > Tony and Benoit, > > Sorry for posting this patch this late on the -rc cycle but I just didn't > have time before to test IGEP boards against 3.14. > > I hope this fix can still make it to 3.14 since is a very big issue > (board not even booting). > > Thanks a lot and best regards, > Javier > > arch/arm/boot/dts/omap3-igep0020.dts | 2 +- > arch/arm/boot/dts/omap3-igep0030.dts | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts > index 25a2b5f..f2779ac 100644 > --- a/arch/arm/boot/dts/omap3-igep0020.dts > +++ b/arch/arm/boot/dts/omap3-igep0020.dts > @@ -14,7 +14,7 @@ > > / { > model = "IGEPv2 (TI OMAP AM/DM37x)"; > - compatible = "isee,omap3-igep0020", "ti,omap3"; > + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; > > leds { > pinctrl-names = "default"; > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts > index 145c58c..2793749 100644 > --- a/arch/arm/boot/dts/omap3-igep0030.dts > +++ b/arch/arm/boot/dts/omap3-igep0030.dts > @@ -13,7 +13,7 @@ > > / { > model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; > - compatible = "isee,omap3-igep0030", "ti,omap3"; > + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; > > leds { > pinctrl-names = "default"; > -- > 1.8.5.3 > I saw you send a pull request for 3.14-rc4 fixes and this fix was not included. Are you planning to send more fixes for 3.14? Thanks a lot and best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Javier Martinez Canillas <javier@dowhile0.org> [140228 10:52]: > Hi Tony, > > On Sat, Feb 22, 2014 at 10:59 AM, Javier Martinez Canillas > <javier.martinez@collabora.co.uk> wrote: > > This patch is based on commit: > > > > 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree") > > > > and fixes a boot hang due the IGEP board being wrongly initialized > > as an OMAP3430 platform instead of an OMAP3630. > > > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > > --- > > > > Tony and Benoit, > > > > Sorry for posting this patch this late on the -rc cycle but I just didn't > > have time before to test IGEP boards against 3.14. > > > > I hope this fix can still make it to 3.14 since is a very big issue > > (board not even booting). > > > > Thanks a lot and best regards, > > Javier > > > > arch/arm/boot/dts/omap3-igep0020.dts | 2 +- > > arch/arm/boot/dts/omap3-igep0030.dts | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts > > index 25a2b5f..f2779ac 100644 > > --- a/arch/arm/boot/dts/omap3-igep0020.dts > > +++ b/arch/arm/boot/dts/omap3-igep0020.dts > > @@ -14,7 +14,7 @@ > > > > / { > > model = "IGEPv2 (TI OMAP AM/DM37x)"; > > - compatible = "isee,omap3-igep0020", "ti,omap3"; > > + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; > > > > leds { > > pinctrl-names = "default"; > > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts > > index 145c58c..2793749 100644 > > --- a/arch/arm/boot/dts/omap3-igep0030.dts > > +++ b/arch/arm/boot/dts/omap3-igep0030.dts > > @@ -13,7 +13,7 @@ > > > > / { > > model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; > > - compatible = "isee,omap3-igep0030", "ti,omap3"; > > + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; > > > > leds { > > pinctrl-names = "default"; > > -- > > 1.8.5.3 > > > > I saw you send a pull request for 3.14-rc4 fixes and this fix was not included. > > Are you planning to send more fixes for 3.14? Yes hoping to send one more set, got this one tagged for it. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Fri, Feb 28, 2014 at 3:57 PM, Tony Lindgren <tony@atomide.com> wrote: > * Javier Martinez Canillas <javier@dowhile0.org> [140228 10:52]: >> Hi Tony, >> >> On Sat, Feb 22, 2014 at 10:59 AM, Javier Martinez Canillas >> <javier.martinez@collabora.co.uk> wrote: >> > This patch is based on commit: >> > >> > 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree") >> > >> > and fixes a boot hang due the IGEP board being wrongly initialized >> > as an OMAP3430 platform instead of an OMAP3630. >> > >> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> >> > --- >> > >> > Tony and Benoit, >> > >> > Sorry for posting this patch this late on the -rc cycle but I just didn't >> > have time before to test IGEP boards against 3.14. >> > >> > I hope this fix can still make it to 3.14 since is a very big issue >> > (board not even booting). >> > >> > Thanks a lot and best regards, >> > Javier >> > >> > arch/arm/boot/dts/omap3-igep0020.dts | 2 +- >> > arch/arm/boot/dts/omap3-igep0030.dts | 2 +- >> > 2 files changed, 2 insertions(+), 2 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts >> > index 25a2b5f..f2779ac 100644 >> > --- a/arch/arm/boot/dts/omap3-igep0020.dts >> > +++ b/arch/arm/boot/dts/omap3-igep0020.dts >> > @@ -14,7 +14,7 @@ >> > >> > / { >> > model = "IGEPv2 (TI OMAP AM/DM37x)"; >> > - compatible = "isee,omap3-igep0020", "ti,omap3"; >> > + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; >> > >> > leds { >> > pinctrl-names = "default"; >> > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts >> > index 145c58c..2793749 100644 >> > --- a/arch/arm/boot/dts/omap3-igep0030.dts >> > +++ b/arch/arm/boot/dts/omap3-igep0030.dts >> > @@ -13,7 +13,7 @@ >> > >> > / { >> > model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; >> > - compatible = "isee,omap3-igep0030", "ti,omap3"; >> > + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; >> > >> > leds { >> > pinctrl-names = "default"; >> > -- >> > 1.8.5.3 >> > >> >> I saw you send a pull request for 3.14-rc4 fixes and this fix was not included. >> >> Are you planning to send more fixes for 3.14? > > Yes hoping to send one more set, got this one tagged for it. > Great, thanks a lot for your help! Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Javier Martinez Canillas <javier@dowhile0.org> [140228 11:07]: > On Fri, Feb 28, 2014 at 3:57 PM, Tony Lindgren <tony@atomide.com> wrote: > > * Javier Martinez Canillas <javier@dowhile0.org> [140228 10:52]: > >> > >> I saw you send a pull request for 3.14-rc4 fixes and this fix was not included. > >> > >> Are you planning to send more fixes for 3.14? > > > > Yes hoping to send one more set, got this one tagged for it. > > > > Great, thanks a lot for your help! Applied to omap-for-v3.14/fixes and pushed out now thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 25a2b5f..f2779ac 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 145c58c..2793749 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";
This patch is based on commit: 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree") and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Tony and Benoit, Sorry for posting this patch this late on the -rc cycle but I just didn't have time before to test IGEP boards against 3.14. I hope this fix can still make it to 3.14 since is a very big issue (board not even booting). Thanks a lot and best regards, Javier arch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)