| Message ID | 1398358430-13570-1-git-send-email-javier.martinez@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Javier Martinez Canillas <javier.martinez@collabora.co.uk> [140424 09:54]: > The IGEPv2 board has a SMSC LAN9221i ethernet chip and not a > SMSC LAN911x connected to the GPMC. Each chip needs different > timings in order to operate correctly so is wrong to include > omap-gpmc-smsc911x.dtsi instead of omap-gpmc-smsc9221.dtsi. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > --- > > Hi Tony, > > I see no performance difference when measuring network throughput using > iperf(1) but this change is the correct one nonetheless since if we later > better adjust the timings it will already include the right dtsi. Yes, let's fix this as wrong timings can cause memory corruption. Applying into omap-for-v3.15/fixes-v2. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b97736d..e2d163b 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -107,7 +107,7 @@ >; }; - smsc911x_pins: pinmux_smsc911x_pins { + smsc9221_pins: pinmux_smsc9221_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 7abd64f..b22caaa 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ */ #include "omap3-igep.dtsi" -#include "omap-gpmc-smsc911x.dtsi" +#include "omap-gpmc-smsc9221.dtsi" / { model = "IGEPv2 (TI OMAP AM/DM37x)"; @@ -248,7 +248,7 @@ ethernet@gpmc { pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; + pinctrl-0 = <&smsc9221_pins>; reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
The IGEPv2 board has a SMSC LAN9221i ethernet chip and not a SMSC LAN911x connected to the GPMC. Each chip needs different timings in order to operate correctly so is wrong to include omap-gpmc-smsc911x.dtsi instead of omap-gpmc-smsc9221.dtsi. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Hi Tony, I see no performance difference when measuring network throughput using iperf(1) but this change is the correct one nonetheless since if we later better adjust the timings it will already include the right dtsi. Best regards, Javier arch/arm/boot/dts/omap3-igep.dtsi | 2 +- arch/arm/boot/dts/omap3-igep0020.dts | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)