diff mbox

[v6,5/5] usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon

Message ID 1401096012-6895-6-git-send-email-george.cherian@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

George Cherian May 26, 2014, 9:20 a.m. UTC
Add sw_babble_control() logic to differentiate between transient
babble and real babble condition. Also add the SW babble control
register definitions.

Babble control register logic is implemented in the latest
revision of AM335x.

Find whether we are running on newer silicon. The babble control
register reads 0x4 by default in newer silicon as opposed to 0
in old versions of AM335x. Based on this enable the sw babble
control logic.

Signed-off-by: George Cherian <george.cherian@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 89 +++++++++++++++++++++++++++++++++++++++++---
 drivers/usb/musb/musb_regs.h |  7 ++++
 2 files changed, 90 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index f6f3087..01543a9 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -136,6 +136,7 @@  struct dsps_glue {
 	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
 	struct timer_list timer;	/* otg_workaround timer */
 	unsigned long last_timer;    /* last timer data for each instance */
+	bool sw_babble_enabled;
 
 	struct dsps_context context;
 	struct debugfs_regset32 regset;
@@ -469,6 +470,19 @@  static int dsps_musb_init(struct musb *musb)
 	val &= ~(1 << wrp->otg_disable);
 	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
 
+	/*
+	 *  Check whether the dsps version has babble control enabled.
+	 * In latest silicon revision the babble control logic is enabled.
+	 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
+	 * logic enabled.
+	 */
+	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	if (val == MUSB_BABBLE_RCV_DISABLE) {
+		glue->sw_babble_enabled = true;
+		val |= MUSB_BABBLE_SW_SESSION_CTRL;
+		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+	}
+
 	ret = dsps_musb_dbg_init(musb, glue);
 	if (ret)
 		return ret;
@@ -536,19 +550,82 @@  static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 	return 0;
 }
 
+static bool  sw_babble_control(struct musb *musb)
+{
+	u8 babble_ctl;
+	bool session_restart =  false;
+
+	babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
+		babble_ctl);
+	/*
+	 * check line monitor flag to check whether babble is
+	 * due to noise
+	 */
+	dev_dbg(musb->controller, "STUCK_J is %s\n",
+		babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
+
+	if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+		int timeout = 10;
+
+		/*
+		 * babble is due to noise, then set transmit idle (d7 bit)
+		 * to resume normal operation
+		 */
+		babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+		babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
+		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
+
+		/* wait till line monitor flag cleared */
+		dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
+		do {
+			babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+			udelay(1);
+		} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
+
+		/* check whether stuck_at_j bit cleared */
+		if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+			/*
+			 * real babble condition has occurred
+			 * restart the controller to start the
+			 * session again
+			 */
+			dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
+				babble_ctl);
+			session_restart = true;
+		}
+	} else {
+		session_restart = true;
+	}
+
+	return session_restart;
+}
+
 static int dsps_musb_reset(struct musb *musb)
 {
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	int session_restart = 0;
 
-	dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
-	usleep_range(100, 200);
-	usb_phy_shutdown(musb->xceiv);
-	usleep_range(100, 200);
-	usb_phy_init(musb->xceiv);
+	if (glue->sw_babble_enabled)
+		session_restart = sw_babble_control(musb);
+	/*
+	 * In case of new silicon version babble condition can be recovered
+	 * without resetting the MUSB. But for older silicon versions, MUSB
+	 * reset is needed
+	 */
+	if (session_restart || !glue->sw_babble_enabled) {
+		dev_info(musb->controller, "Restarting MUSB to recover from Babble\n");
+		dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
+		usleep_range(100, 200);
+		usb_phy_shutdown(musb->xceiv);
+		usleep_range(100, 200);
+		usb_phy_init(musb->xceiv);
+		session_restart = 1;
+	}
 
-	return 0;
+	return !session_restart;
 }
 
 static struct musb_platform_ops dsps_ops = {
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 03f2655..b9bcda5 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -72,6 +72,12 @@ 
 #define MUSB_DEVCTL_HR		0x02
 #define MUSB_DEVCTL_SESSION	0x01
 
+/* BABBLE_CTL */
+#define MUSB_BABBLE_FORCE_TXIDLE	0x80
+#define MUSB_BABBLE_SW_SESSION_CTRL	0x40
+#define MUSB_BABBLE_STUCK_J		0x20
+#define MUSB_BABBLE_RCV_DISABLE		0x04
+
 /* MUSB ULPI VBUSCONTROL */
 #define MUSB_ULPI_USE_EXTVBUS	0x01
 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
@@ -246,6 +252,7 @@ 
  */
 
 #define MUSB_DEVCTL		0x60	/* 8 bit */
+#define MUSB_BABBLE_CTL		0x61	/* 8 bit */
 
 /* These are always controlled through the INDEX register */
 #define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */