| Message ID | 1403700996-27105-1-git-send-email-rogerq@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 06/25/2014 07:56 AM, Roger Quadros wrote: > The SATA and USB PHYs need the 1.8V and 3.3V supplies. > The PHY drivers/framework don't yet support regulator > supply so we have to keep these regulators always-on till > then. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index 4adc280..99a1f79 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -241,6 +241,7 @@ > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > regulator-boot-on; > + regulator-always-on; > }; > > ldo9_reg: ldo9 { > @@ -266,6 +267,7 @@ > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > regulator-boot-on; > + regulator-always-on; > }; > }; > }; > Why not fix phy driver/framework as needed? the trouble is people always forget to remove always-on... who actually audits old logs and fixes stuff back up?
* Nishanth Menon <nm@ti.com> [140625 15:29]: > On 06/25/2014 07:56 AM, Roger Quadros wrote: > > The SATA and USB PHYs need the 1.8V and 3.3V supplies. > > The PHY drivers/framework don't yet support regulator > > supply so we have to keep these regulators always-on till > > then. > > > > Signed-off-by: Roger Quadros <rogerq@ti.com> > > --- > > arch/arm/boot/dts/dra7-evm.dts | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > > index 4adc280..99a1f79 100644 > > --- a/arch/arm/boot/dts/dra7-evm.dts > > +++ b/arch/arm/boot/dts/dra7-evm.dts > > @@ -241,6 +241,7 @@ > > regulator-min-microvolt = <1800000>; > > regulator-max-microvolt = <1800000>; > > regulator-boot-on; > > + regulator-always-on; > > }; > > > > ldo9_reg: ldo9 { > > @@ -266,6 +267,7 @@ > > regulator-min-microvolt = <3300000>; > > regulator-max-microvolt = <3300000>; > > regulator-boot-on; > > + regulator-always-on; > > }; > > }; > > }; > > > > Why not fix phy driver/framework as needed? the trouble is people > always forget to remove always-on... who actually audits old logs and > fixes stuff back up? Yes I agree let's not play with the regulator-always-on unless absolutely necessary. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/26/2014 10:31 AM, Tony Lindgren wrote: > * Nishanth Menon <nm@ti.com> [140625 15:29]: >> On 06/25/2014 07:56 AM, Roger Quadros wrote: >>> The SATA and USB PHYs need the 1.8V and 3.3V supplies. >>> The PHY drivers/framework don't yet support regulator >>> supply so we have to keep these regulators always-on till >>> then. >>> >>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>> --- >>> arch/arm/boot/dts/dra7-evm.dts | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts >>> index 4adc280..99a1f79 100644 >>> --- a/arch/arm/boot/dts/dra7-evm.dts >>> +++ b/arch/arm/boot/dts/dra7-evm.dts >>> @@ -241,6 +241,7 @@ >>> regulator-min-microvolt = <1800000>; >>> regulator-max-microvolt = <1800000>; >>> regulator-boot-on; >>> + regulator-always-on; >>> }; >>> >>> ldo9_reg: ldo9 { >>> @@ -266,6 +267,7 @@ >>> regulator-min-microvolt = <3300000>; >>> regulator-max-microvolt = <3300000>; >>> regulator-boot-on; >>> + regulator-always-on; >>> }; >>> }; >>> }; >>> >> >> Why not fix phy driver/framework as needed? the trouble is people >> always forget to remove always-on... who actually audits old logs and >> fixes stuff back up? > > Yes I agree let's not play with the regulator-always-on unless > absolutely necessary. > Agreed. PHY framework must deal with this. Till then USB, SATA and most likely PCIe as well will not work on DRA7-evm. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc280..99a1f79 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -241,6 +241,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; ldo9_reg: ldo9 { @@ -266,6 +267,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; }; };
The SATA and USB PHYs need the 1.8V and 3.3V supplies. The PHY drivers/framework don't yet support regulator supply so we have to keep these regulators always-on till then. Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dra7-evm.dts | 2 ++ 1 file changed, 2 insertions(+)