diff mbox

[RFC/PATCH,4/5] arm: dts: am43x-epos: Add VPFE DTS entries

Message ID 1405447012-5340-5-git-send-email-balbi@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Felipe Balbi July 15, 2014, 5:56 p.m. UTC
From: Benoit Parrot <bparrot@ti.com>

Add Video Processing Front End (VPFE) device tree nodes for AM43x-epos.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 54 ++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 90098f9..ac9a4cc 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -243,6 +243,42 @@ 
 				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -568,3 +604,21 @@ 
 		};
 	};
 };
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			if_type = <2>;
+			bus_width = <8>;
+			hdpol = <0>;
+			vdpol = <0>;
+		};
+	};
+};