diff mbox

[3/3] arm: dts: omap3-gta04: Extend touchscreen configs

Message ID 1412108254-19234-4-git-send-email-marek@goldelico.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marek Belisko Sept. 30, 2014, 8:17 p.m. UTC
Adding min/max values for various touschscreen properties.

Signed-off-by: Marek Belisko <marek@goldelico.com>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Tony Lindgren Oct. 13, 2014, 4:29 p.m. UTC | #1
* Marek Belisko <marek@goldelico.com> [140930 13:19]:
> Adding min/max values for various touschscreen properties.

Assuming no other comments on this patch series, this should be
safe to merge along with the other patches in this series without
causing merge conflicts:

Acked-by: Tony Lindgren <tony@atomide.com>
 
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
>  arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index fd34f91..2dafac3b 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -284,6 +284,12 @@
>  		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
>  		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
>  		ti,x-plate-ohms = <600>;
> +		ti,min-x = <0x100>;
> +		ti,max-x = <0xf00>;
> +		ti,min-y = <0xf00>;
> +		ti,max-y = <0x100>;
> +		ti,min-rt = <0xfff>;
> +		ti,max-rt = <0>;
>  	};
>  };
>  
> -- 
> 1.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fd34f91..2dafac3b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -284,6 +284,12 @@ 
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <600>;
+		ti,min-x = <0x100>;
+		ti,max-x = <0xf00>;
+		ti,min-y = <0xf00>;
+		ti,max-y = <0x100>;
+		ti,min-rt = <0xfff>;
+		ti,max-rt = <0>;
 	};
 };