diff mbox

ARM: dts: DRA7: Add aliases for all serial ports

Message ID 1413908295-699-1-git-send-email-nm@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Nishanth Menon Oct. 21, 2014, 4:18 p.m. UTC
Add serial port aliases for consoles > 6.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

Comments

Arnd Bergmann Oct. 21, 2014, 7:57 p.m. UTC | #1
On Tuesday 21 October 2014 11:18:15 Nishanth Menon wrote:
> Add serial port aliases for consoles > 6.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
>  arch/arm/boot/dts/dra7.dtsi |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 9cc9843..208dd83 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -34,6 +34,10 @@
>                 serial3 = &uart4;
>                 serial4 = &uart5;
>                 serial5 = &uart6;
> +               serial6 = &uart7;
> +               serial7 = &uart8;
> +               serial8 = &uart9;
> +               serial9 = &uart10;
> 

I think this was wrong to start with: The aliases should be in the per-board
.dts file and only list the ones that are actually connected to the outside.

Otherwise the numbering won't match what's written on the board.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Nishanth Menon Oct. 21, 2014, 8:07 p.m. UTC | #2
On 10/21/2014 02:57 PM, Arnd Bergmann wrote:
> On Tuesday 21 October 2014 11:18:15 Nishanth Menon wrote:
>> Add serial port aliases for consoles > 6.
>>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> ---
>>  arch/arm/boot/dts/dra7.dtsi |    4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>> index 9cc9843..208dd83 100644
>> --- a/arch/arm/boot/dts/dra7.dtsi
>> +++ b/arch/arm/boot/dts/dra7.dtsi
>> @@ -34,6 +34,10 @@
>>                 serial3 = &uart4;
>>                 serial4 = &uart5;
>>                 serial5 = &uart6;
>> +               serial6 = &uart7;
>> +               serial7 = &uart8;
>> +               serial8 = &uart9;
>> +               serial9 = &uart10;
>>
> 
> I think this was wrong to start with: The aliases should be in the per-board
> .dts file and only list the ones that are actually connected to the outside.
> 
> Otherwise the numbering won't match what's written on the board.

At least in the case of DRA7 boards, they are not written specifically
since they come out over onboard FTDI usb2serial.

This will at least ensure that /dev/ttyO9 will always point to uart10
no matter the board, instead of having ttyO0 always pointing to
console serial port no matter the board (and having to guess which
figure out it actually was aliased to).
Tony Lindgren Nov. 10, 2014, 11:49 p.m. UTC | #3
* Nishanth Menon <nm@ti.com> [141021 13:08]:
> On 10/21/2014 02:57 PM, Arnd Bergmann wrote:
> > On Tuesday 21 October 2014 11:18:15 Nishanth Menon wrote:
> >> Add serial port aliases for consoles > 6.
> >>
> >> Signed-off-by: Nishanth Menon <nm@ti.com>
> >> ---
> >>  arch/arm/boot/dts/dra7.dtsi |    4 ++++
> >>  1 file changed, 4 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> >> index 9cc9843..208dd83 100644
> >> --- a/arch/arm/boot/dts/dra7.dtsi
> >> +++ b/arch/arm/boot/dts/dra7.dtsi
> >> @@ -34,6 +34,10 @@
> >>                 serial3 = &uart4;
> >>                 serial4 = &uart5;
> >>                 serial5 = &uart6;
> >> +               serial6 = &uart7;
> >> +               serial7 = &uart8;
> >> +               serial8 = &uart9;
> >> +               serial9 = &uart10;
> >>
> > 
> > I think this was wrong to start with: The aliases should be in the per-board
> > .dts file and only list the ones that are actually connected to the outside.
> > 
> > Otherwise the numbering won't match what's written on the board.
> 
> At least in the case of DRA7 boards, they are not written specifically
> since they come out over onboard FTDI usb2serial.
> 
> This will at least ensure that /dev/ttyO9 will always point to uart10
> no matter the board, instead of having ttyO0 always pointing to
> console serial port no matter the board (and having to guess which
> figure out it actually was aliased to).

It seems that having the UART numbering make sense is a good reason
to apply this one. So applying into omap-for-v3.19/dt.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9cc9843..208dd83 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -34,6 +34,10 @@ 
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+		serial9 = &uart10;
 	};
 
 	timer {