@@ -173,8 +173,25 @@ enum musb_g_ep0_state {
/******************************** TYPES *************************************/
+struct musb_io;
+
/**
* struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @quirks: flags for platform specific quirks
+ * @enable: enable device
+ * @disable: disable device
+ * @ep_offset: returns the end point offset
+ * @ep_select: selects the specified end point
+ * @fifo_mode: sets the fifo mode
+ * @fifo_offset: returns the fifo offset
+ * @readb: read 8 bits
+ * @writeb: write 8 bits
+ * @readw: read 16 bits
+ * @writew: write 16 bits
+ * @readl: read 32 bits
+ * @writel: write 32 bits
+ * @read_fifo: reads the fifo
+ * @write_fifo: writes to fifo
* @init: turns on clocks, sets up platform-specific registers, etc
* @exit: undoes @init
* @set_mode: forcefully changes operating mode
@@ -184,12 +201,34 @@ enum musb_g_ep0_state {
* @adjust_channel_params: pre check for standard dma channel_program func
*/
struct musb_platform_ops {
+
+#define MUSB_DMA_UX500 BIT(6)
+#define MUSB_DMA_CPPI41 BIT(5)
+#define MUSB_DMA_CPPI BIT(4)
+#define MUSB_DMA_TUSB_OMAP BIT(3)
+#define MUSB_DMA_INVENTRA BIT(2)
+#define MUSB_IN_TUSB BIT(1)
+#define MUSB_INDEXED_EP BIT(0)
+ u32 quirks;
+
int (*init)(struct musb *musb);
int (*exit)(struct musb *musb);
void (*enable)(struct musb *musb);
void (*disable)(struct musb *musb);
+ u32 (*ep_offset)(u8 epnum, u16 offset);
+ void (*ep_select)(void __iomem *mbase, u8 epnum);
+ u16 fifo_mode;
+ u32 (*fifo_offset)(u8 epnum);
+ u8 (*readb)(const void __iomem *addr, unsigned offset);
+ void (*writeb)(void __iomem *addr, unsigned offset, u8 data);
+ u16 (*readw)(const void __iomem *addr, unsigned offset);
+ void (*writew)(void __iomem *addr, unsigned offset, u16 data);
+ u32 (*readl)(const void __iomem *addr, unsigned offset);
+ void (*writel)(void __iomem *addr, unsigned offset, u32 data);
+ void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
+ void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
int (*set_mode)(struct musb *musb, u8 mode);
void (*try_idle)(struct musb *musb, unsigned long timeout);
int (*reset)(struct musb *musb);
@@ -292,6 +331,7 @@ struct musb {
/* device lock */
spinlock_t lock;
+ struct musb_io io;
const struct musb_platform_ops *ops;
struct musb_context_registers context;
@@ -37,6 +37,24 @@
#include <linux/io.h>
+/**
+ * struct musb_io - IO functions for MUSB
+ * @quirks: platform specific flags
+ * @ep_offset: platform specific function to get end point offset
+ * @ep_select: platform specific function to select end point
+ * @fifo_offset: platform specific function to get fifo offset
+ * @read_fifo: platform specific function to read fifo
+ * @write_fifo: platform specific function to write fifo
+ */
+struct musb_io {
+ u32 quirks;
+ u32 (*ep_offset)(u8 epnum, u16 offset);
+ void (*ep_select)(void __iomem *mbase, u8 epnum);
+ u32 (*fifo_offset)(u8 epnum);
+ void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
+ void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
+};
+
#ifndef CONFIG_BLACKFIN
/* NOTE: these offsets are all in bytes */
MUSB currently breaks badly if we try to build in support for multiple platforms. This also happens if done as loadable modules, which is not nice for distros. Let's fix the issue by adding new struct musb_io for the IO access functions that the platform code can populate. Note that we don't want to use the current ops as that's really platform_data and and set as a const. This should allow eventually adding function pointers also for the DMA code to struct musb_io, but that's a whole different set of patches. For now, let's just fix the PIO access. Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/usb/musb/musb_core.h | 40 ++++++++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_io.h | 18 ++++++++++++++++++ 2 files changed, 58 insertions(+)