| Message ID | 1420224433-27001-1-git-send-email-balbi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Felipe Balbi <balbi@ti.com> [150102 10:50]: > as it turns out the current IRQ number will > *always* be available from SIR register which > renders the reads of PENDING registers as plain > unnecessary overhead. > > In order to catch any situation where SIR reads > as zero, we're adding a WARN() to turn it into > a very verbose error and users actually report > it. > > With this patch average running time of > omap_intc_handle_irq() reduced from about 28.5us > to 19.8us as measured by the kernel function > profiler. That's a nice improvment for an interrupt controller :) > Tested with BeagleBoneBlack Rev A5C. > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > > Before applying, it would be very nice to get reports > from other folks on different platforms, specially OMAP2/3 > ones which I don't have (easy) access. Seems to behave just fine on omap2 and 3 here, gave it a quick try on n800, n900, omap3-ldp and 37xx-evm: Tested-by: Tony Lindgren <tony@atomide.com> Regards, Tony > drivers/irqchip/irq-omap-intc.c | 35 +++++------------------------------ > 1 file changed, 5 insertions(+), 30 deletions(-) > > diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c > index 28718d3..a2da6d5 100644 > --- a/drivers/irqchip/irq-omap-intc.c > +++ b/drivers/irqchip/irq-omap-intc.c > @@ -315,37 +315,12 @@ static int __init omap_init_irq(u32 base, struct device_node *node) > static asmlinkage void __exception_irq_entry > omap_intc_handle_irq(struct pt_regs *regs) > { > - u32 irqnr = 0; > - int handled_irq = 0; > - int i; > - > - do { > - for (i = 0; i < omap_nr_pending; i++) { > - irqnr = intc_readl(INTC_PENDING_IRQ0 + (0x20 * i)); > - if (irqnr) > - goto out; > - } > - > -out: > - if (!irqnr) > - break; > - > - irqnr = intc_readl(INTC_SIR); > - irqnr &= ACTIVEIRQ_MASK; > + u32 irqnr; > > - if (irqnr) { > - handle_domain_irq(domain, irqnr, regs); > - handled_irq = 1; > - } > - } while (irqnr); > - > - /* > - * If an irq is masked or deasserted while active, we will > - * keep ending up here with no irq handled. So remove it from > - * the INTC with an ack. > - */ > - if (!handled_irq) > - omap_ack_irq(NULL); > + irqnr = intc_readl(INTC_SIR); > + irqnr &= ACTIVEIRQ_MASK; > + WARN(!irqnr, "Spuriour IRQ ?\n"); > + handle_domain_irq(domain, irqnr, regs); > } > > void __init omap2_init_irq(void) > -- > 2.2.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jan 02, 2015 at 01:32:51PM -0800, Tony Lindgren wrote: > * Felipe Balbi <balbi@ti.com> [150102 10:50]: > > as it turns out the current IRQ number will > > *always* be available from SIR register which > > renders the reads of PENDING registers as plain > > unnecessary overhead. > > > > In order to catch any situation where SIR reads > > as zero, we're adding a WARN() to turn it into > > a very verbose error and users actually report > > it. > > > > With this patch average running time of > > omap_intc_handle_irq() reduced from about 28.5us > > to 19.8us as measured by the kernel function > > profiler. > > That's a nice improvment for an interrupt controller :) > > > Tested with BeagleBoneBlack Rev A5C. > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > --- > > > > Before applying, it would be very nice to get reports > > from other folks on different platforms, specially OMAP2/3 > > ones which I don't have (easy) access. > > Seems to behave just fine on omap2 and 3 here, gave it > a quick try on n800, n900, omap3-ldp and 37xx-evm: > > Tested-by: Tony Lindgren <tony@atomide.com> cool, thanks
* Felipe Balbi <balbi@ti.com> [150102 10:50]: > as it turns out the current IRQ number will > *always* be available from SIR register which > renders the reads of PENDING registers as plain > unnecessary overhead. > > In order to catch any situation where SIR reads > as zero, we're adding a WARN() to turn it into > a very verbose error and users actually report > it. > > With this patch average running time of > omap_intc_handle_irq() reduced from about 28.5us > to 19.8us as measured by the kernel function > profiler. > > Tested with BeagleBoneBlack Rev A5C. > > Signed-off-by: Felipe Balbi <balbi@ti.com> Jason, looks like this is not showing up in Linux next. The same for the changes I did for dm81xx. Regards, Tony > --- > > Before applying, it would be very nice to get reports > from other folks on different platforms, specially OMAP2/3 > ones which I don't have (easy) access. > > drivers/irqchip/irq-omap-intc.c | 35 +++++------------------------------ > 1 file changed, 5 insertions(+), 30 deletions(-) > > diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c > index 28718d3..a2da6d5 100644 > --- a/drivers/irqchip/irq-omap-intc.c > +++ b/drivers/irqchip/irq-omap-intc.c > @@ -315,37 +315,12 @@ static int __init omap_init_irq(u32 base, struct device_node *node) > static asmlinkage void __exception_irq_entry > omap_intc_handle_irq(struct pt_regs *regs) > { > - u32 irqnr = 0; > - int handled_irq = 0; > - int i; > - > - do { > - for (i = 0; i < omap_nr_pending; i++) { > - irqnr = intc_readl(INTC_PENDING_IRQ0 + (0x20 * i)); > - if (irqnr) > - goto out; > - } > - > -out: > - if (!irqnr) > - break; > - > - irqnr = intc_readl(INTC_SIR); > - irqnr &= ACTIVEIRQ_MASK; > + u32 irqnr; > > - if (irqnr) { > - handle_domain_irq(domain, irqnr, regs); > - handled_irq = 1; > - } > - } while (irqnr); > - > - /* > - * If an irq is masked or deasserted while active, we will > - * keep ending up here with no irq handled. So remove it from > - * the INTC with an ack. > - */ > - if (!handled_irq) > - omap_ack_irq(NULL); > + irqnr = intc_readl(INTC_SIR); > + irqnr &= ACTIVEIRQ_MASK; > + WARN(!irqnr, "Spuriour IRQ ?\n"); > + handle_domain_irq(domain, irqnr, regs); > } > > void __init omap2_init_irq(void) > -- > 2.2.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Felipe, * Tony Lindgren <tony@atomide.com> [150119 13:41]: > * Felipe Balbi <balbi@ti.com> [150102 10:50]: > > as it turns out the current IRQ number will > > *always* be available from SIR register which > > renders the reads of PENDING registers as plain > > unnecessary overhead. > > > > In order to catch any situation where SIR reads > > as zero, we're adding a WARN() to turn it into > > a very verbose error and users actually report > > it. > > > > With this patch average running time of > > omap_intc_handle_irq() reduced from about 28.5us > > to 19.8us as measured by the kernel function > > profiler. > > > > Tested with BeagleBoneBlack Rev A5C. > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > Jason, looks like this is not showing up in Linux next. The > same for the changes I did for dm81xx. Can you please resend this to Jason? Looks like this is still not merged. Regards, Tony > > Before applying, it would be very nice to get reports > > from other folks on different platforms, specially OMAP2/3 > > ones which I don't have (easy) access. > > > > drivers/irqchip/irq-omap-intc.c | 35 +++++------------------------------ > > 1 file changed, 5 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c > > index 28718d3..a2da6d5 100644 > > --- a/drivers/irqchip/irq-omap-intc.c > > +++ b/drivers/irqchip/irq-omap-intc.c > > @@ -315,37 +315,12 @@ static int __init omap_init_irq(u32 base, struct device_node *node) > > static asmlinkage void __exception_irq_entry > > omap_intc_handle_irq(struct pt_regs *regs) > > { > > - u32 irqnr = 0; > > - int handled_irq = 0; > > - int i; > > - > > - do { > > - for (i = 0; i < omap_nr_pending; i++) { > > - irqnr = intc_readl(INTC_PENDING_IRQ0 + (0x20 * i)); > > - if (irqnr) > > - goto out; > > - } > > - > > -out: > > - if (!irqnr) > > - break; > > - > > - irqnr = intc_readl(INTC_SIR); > > - irqnr &= ACTIVEIRQ_MASK; > > + u32 irqnr; > > > > - if (irqnr) { > > - handle_domain_irq(domain, irqnr, regs); > > - handled_irq = 1; > > - } > > - } while (irqnr); > > - > > - /* > > - * If an irq is masked or deasserted while active, we will > > - * keep ending up here with no irq handled. So remove it from > > - * the INTC with an ack. > > - */ > > - if (!handled_irq) > > - omap_ack_irq(NULL); > > + irqnr = intc_readl(INTC_SIR); > > + irqnr &= ACTIVEIRQ_MASK; > > + WARN(!irqnr, "Spuriour IRQ ?\n"); > > + handle_domain_irq(domain, irqnr, regs); > > } > > > > void __init omap2_init_irq(void) > > -- > > 2.2.0 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 15 Jul 2015, Tony Lindgren wrote: > Felipe, > > * Tony Lindgren <tony@atomide.com> [150119 13:41]: > > * Felipe Balbi <balbi@ti.com> [150102 10:50]: > > > as it turns out the current IRQ number will > > > *always* be available from SIR register which > > > renders the reads of PENDING registers as plain > > > unnecessary overhead. > > > > > > In order to catch any situation where SIR reads > > > as zero, we're adding a WARN() to turn it into > > > a very verbose error and users actually report > > > it. > > > > > > With this patch average running time of > > > omap_intc_handle_irq() reduced from about 28.5us > > > to 19.8us as measured by the kernel function > > > profiler. > > > > > > Tested with BeagleBoneBlack Rev A5C. > > > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > > > Jason, looks like this is not showing up in Linux next. The > > same for the changes I did for dm81xx. > > Can you please resend this to Jason? Looks like this > is still not merged. Please send it to me asap and please cc lkml on irqchip patches. Thanks, tglx -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jul 15, 2015 at 02:36:54PM +0200, Thomas Gleixner wrote: > On Wed, 15 Jul 2015, Tony Lindgren wrote: > > Felipe, > > > > * Tony Lindgren <tony@atomide.com> [150119 13:41]: > > > * Felipe Balbi <balbi@ti.com> [150102 10:50]: > > > > as it turns out the current IRQ number will > > > > *always* be available from SIR register which > > > > renders the reads of PENDING registers as plain > > > > unnecessary overhead. > > > > > > > > In order to catch any situation where SIR reads > > > > as zero, we're adding a WARN() to turn it into > > > > a very verbose error and users actually report > > > > it. > > > > > > > > With this patch average running time of > > > > omap_intc_handle_irq() reduced from about 28.5us > > > > to 19.8us as measured by the kernel function > > > > profiler. > > > > > > > > Tested with BeagleBoneBlack Rev A5C. > > > > > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > > > > > Jason, looks like this is not showing up in Linux next. The > > > same for the changes I did for dm81xx. > > > > Can you please resend this to Jason? Looks like this > > is still not merged. > > Please send it to me asap and please cc lkml on irqchip patches. building and testing again. Will resend shortly
diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c index 28718d3..a2da6d5 100644 --- a/drivers/irqchip/irq-omap-intc.c +++ b/drivers/irqchip/irq-omap-intc.c @@ -315,37 +315,12 @@ static int __init omap_init_irq(u32 base, struct device_node *node) static asmlinkage void __exception_irq_entry omap_intc_handle_irq(struct pt_regs *regs) { - u32 irqnr = 0; - int handled_irq = 0; - int i; - - do { - for (i = 0; i < omap_nr_pending; i++) { - irqnr = intc_readl(INTC_PENDING_IRQ0 + (0x20 * i)); - if (irqnr) - goto out; - } - -out: - if (!irqnr) - break; - - irqnr = intc_readl(INTC_SIR); - irqnr &= ACTIVEIRQ_MASK; + u32 irqnr; - if (irqnr) { - handle_domain_irq(domain, irqnr, regs); - handled_irq = 1; - } - } while (irqnr); - - /* - * If an irq is masked or deasserted while active, we will - * keep ending up here with no irq handled. So remove it from - * the INTC with an ack. - */ - if (!handled_irq) - omap_ack_irq(NULL); + irqnr = intc_readl(INTC_SIR); + irqnr &= ACTIVEIRQ_MASK; + WARN(!irqnr, "Spuriour IRQ ?\n"); + handle_domain_irq(domain, irqnr, regs); } void __init omap2_init_irq(void)
as it turns out the current IRQ number will *always* be available from SIR register which renders the reads of PENDING registers as plain unnecessary overhead. In order to catch any situation where SIR reads as zero, we're adding a WARN() to turn it into a very verbose error and users actually report it. With this patch average running time of omap_intc_handle_irq() reduced from about 28.5us to 19.8us as measured by the kernel function profiler. Tested with BeagleBoneBlack Rev A5C. Signed-off-by: Felipe Balbi <balbi@ti.com> --- Before applying, it would be very nice to get reports from other folks on different platforms, specially OMAP2/3 ones which I don't have (easy) access. drivers/irqchip/irq-omap-intc.c | 35 +++++------------------------------ 1 file changed, 5 insertions(+), 30 deletions(-)