| Message ID | 1421336283-17904-1-git-send-email-balbi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Felipe Balbi <balbi@ti.com> [150115 07:42]: > Whenever Suspend PHY bit is set on DRA7x devices, > USB will not work due to Set EP Configuration command > always failing. > > This was only found after a recent commit 2164a47 (usb: > dwc3: set SUSPHY bit for all cores, which will be merged > for v3.19) added a missing *required* step to dwc3 > initialization. Synopsys Databook requires that we enable > Suspend PHY bit after initialization but that, unfortunately, > breaks DRA7x. > > Note that the same regression was already patched for AM437x. > > Reported-by: Roger Quadros <rogerq@ti.com> > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > > Tony, this fixes a regression with v3.19 OK applying into omap-for-v3.19/fixes thanks. Tony > arch/arm/boot/dts/dra7.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 22771bc1643a..63f8b007bdc5 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -1257,6 +1257,8 @@ > tx-fifo-resize; > maximum-speed = "super-speed"; > dr_mode = "otg"; > + snps,dis_u3_susphy_quirk; > + snps,dis_u2_susphy_quirk; > }; > }; > > @@ -1278,6 +1280,8 @@ > tx-fifo-resize; > maximum-speed = "high-speed"; > dr_mode = "otg"; > + snps,dis_u3_susphy_quirk; > + snps,dis_u2_susphy_quirk; > }; > }; > > @@ -1299,6 +1303,8 @@ > tx-fifo-resize; > maximum-speed = "high-speed"; > dr_mode = "otg"; > + snps,dis_u3_susphy_quirk; > + snps,dis_u2_susphy_quirk; > }; > }; > > -- > 2.2.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 22771bc1643a..63f8b007bdc5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1257,6 +1257,8 @@ tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1278,6 +1280,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1299,6 +1303,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; };
Whenever Suspend PHY bit is set on DRA7x devices, USB will not work due to Set EP Configuration command always failing. This was only found after a recent commit 2164a47 (usb: dwc3: set SUSPHY bit for all cores, which will be merged for v3.19) added a missing *required* step to dwc3 initialization. Synopsys Databook requires that we enable Suspend PHY bit after initialization but that, unfortunately, breaks DRA7x. Note that the same regression was already patched for AM437x. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> --- Tony, this fixes a regression with v3.19 arch/arm/boot/dts/dra7.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)