diff mbox

[v3,1/3] ARM: OMAP2+: Use pdata-quirks for wkup_m3 reset management

Message ID 1427917630-43961-2-git-send-email-d-gerlach@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dave Gerlach April 1, 2015, 7:47 p.m. UTC 
Use pdata-quirks to provide platform data required for reset
management during boot and shutdown of the wkup_m3 processor
on both the AM33xx and AM43xx SoCs. The WkupM3 remote processor
is used to implement and achieve low-power functionality on
the AM33xx & AM43xx SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index e642b07..7b4a4c1 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -18,6 +18,7 @@ 
 
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -314,6 +315,14 @@  static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
 
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static struct wkup_m3_platform_data wkup_m3_data = {
+	.reset_name = "wkup_m3",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
 #ifdef CONFIG_SOC_AM33XX
 static void __init am335x_evmsk_legacy_init(void)
 {
@@ -383,6 +392,10 @@  struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
 #endif
+#ifdef CONFIG_SOC_AM33XX
+	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
+#endif
 #ifdef CONFIG_ARCH_OMAP4
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
@@ -396,6 +409,8 @@  struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_SOC_AM43XX
 	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",