| Message ID | 1428535432-8153-1-git-send-email-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/08/2015 04:23 PM, Nishanth Menon wrote: > Thermal framework may already be ready and cooling policies might > already be functional when we are attempting to register gpio fan as > a cooling device. This can be reproduced by changing probe order in > which registration of various modules are done in a system. In such > a case, kernel generates an oops since the data structures are not > completely populated with the wrong assumption that thermal framework > is not yet ready. Fix this by reordering the thermal framework > registration to occur after hwmon registration of the fan is complete. > > Example kernel oops: > [ 149.005828] Unable to handle kernel NULL pointer dereference at virtual address 0000008c > [ 149.014369] pgd = ecf48000 > [ 149.017204] [0000008c] *pgd=ac065831, *pte=00000000, *ppte=00000000 > [ 149.023820] Internal error: Oops: 17 [#1] SMP ARM > [ 149.028745] Modules linked in: gpio_fan(+) cpufreq_dt ipv6 evdev leds_gpio led_class omap_wdt phy_omap_usb2 rtc_palmas palmas_pwrbutton tmp102 ti_soc_thermal dwc3_omap thermal_sys extcon rtc_omap rtc_ds1307 hwmon > [ 149.048629] CPU: 1 PID: 1183 Comm: modprobe Not tainted 4.0.0-rc7-next-20150407-00002-g7a82da074c99 #3 > [ 149.058383] Hardware name: Generic DRA74X (Flattened Device Tree) > [ 149.064763] task: edec1240 ti: ec0e0000 task.ti: ec0e0000 > [ 149.070421] PC is at dev_driver_string+0x0/0x38 > [ 149.075165] LR is at __dev_printk+0x24/0x70 > [ 149.079540] pc : [<c03d6cd0>] lr : [<c03d72c4>] psr: 20000013 > [ 149.079540] sp : ec0e1c28 ip : edec1240 fp : 00000000 > [ 149.091568] r10: edf3eee0 r9 : 00000000 r8 : ffffffff > [ 149.097040] r7 : edf3eea0 r6 : 00000034 r5 : 00000010 r4 : ec0e1c44 > [ 149.103871] r3 : ec0e1c4c r2 : ec0e1c44 r1 : c079d800 r0 : 00000010 > [ 149.110709] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user > [ 149.118182] Control: 10c5387d Table: acf4806a DAC: 00000015 > [ 149.124198] Process modprobe (pid: 1183, stack limit = 0xec0e0218) > [ 149.130673] Stack: (0xec0e1c28 to 0xec0e2000) > [ 149.135235] 1c20: 60000013 c05e2ae0 00000000 edf3ec00 ec934a10 c03d73d4 > ... > [ 149.392230] 1fe0: befe1888 befe1878 00019418 b6ea08f0 80000010 00000003 00000000 00000000 > [ 149.400798] [<c03d6cd0>] (dev_driver_string) from [<c03d72c4>] (__dev_printk+0x24/0x70) > [ 149.409193] [<c03d72c4>] (__dev_printk) from [<c03d73d4>] (dev_warn+0x34/0x48) > [ 149.416767] [<c03d73d4>] (dev_warn) from [<bf0f54fc>] (get_fan_speed_index+0x94/0xa4 [gpio_fan]) > [ 149.425980] [<bf0f54fc>] (get_fan_speed_index [gpio_fan]) from [<bf0f5524>] (gpio_fan_get_cur_state+0x18/0x30 [gpio_fan]) > [ 149.437476] [<bf0f5524>] (gpio_fan_get_cur_state [gpio_fan]) from [<bf02767c>] (thermal_zone_trip_update+0xe8/0x2a4 [thermal_sys]) > [ 149.449794] [<bf02767c>] (thermal_zone_trip_update [thermal_sys]) from [<bf027844>] (step_wise_throttle+0xc/0x74 [thermal_sys]) > [ 149.461832] [<bf027844>] (step_wise_throttle [thermal_sys]) from [<bf024ff4>] (handle_thermal_trip+0x5c/0x188 [thermal_sys]) > [ 149.473603] [<bf024ff4>] (handle_thermal_trip [thermal_sys]) from [<bf0256c4>] (thermal_zone_device_update+0x94/0x108 [thermal_sys]) > [ 149.486104] [<bf0256c4>] (thermal_zone_device_update [thermal_sys]) from [<bf026470>] (__thermal_cooling_device_register+0x2e8/0x374 [thermal_sys]) > [ 149.499956] [<bf026470>] (__thermal_cooling_device_register [thermal_sys]) from [<bf0f58e4>] (gpio_fan_probe+0x350/0x4d0 [gpio_fan]) > [ 149.512438] [<bf0f58e4>] (gpio_fan_probe [gpio_fan]) from [<c03db8a0>] (platform_drv_probe+0x48/0x98) > [ 149.522109] [<c03db8a0>] (platform_drv_probe) from [<c03da30c>] (driver_probe_device+0x1b0/0x26c) > [ 149.531399] [<c03da30c>] (driver_probe_device) from [<c03da45c>] (__driver_attach+0x94/0x98) > [ 149.540238] [<c03da45c>] (__driver_attach) from [<c03d8bb0>] (bus_for_each_dev+0x54/0x88) > [ 149.548814] [<c03d8bb0>] (bus_for_each_dev) from [<c03d9a34>] (bus_add_driver+0xdc/0x1d4) > [ 149.557381] [<c03d9a34>] (bus_add_driver) from [<c03dac30>] (driver_register+0x78/0xf4) > [ 149.565765] [<c03dac30>] (driver_register) from [<c0009784>] (do_one_initcall+0x80/0x1d8) > [ 149.574340] [<c0009784>] (do_one_initcall) from [<c00c2278>] (do_init_module+0x5c/0x1b8) > [ 149.582833] [<c00c2278>] (do_init_module) from [<c00c3bbc>] (load_module+0x1720/0x1dcc) > [ 149.591212] [<c00c3bbc>] (load_module) from [<c00c43d0>] (SyS_finit_module+0x68/0x6c) > [ 149.599418] [<c00c43d0>] (SyS_finit_module) from [<c000f3c0>] (ret_fast_syscall+0x0/0x4c) > [ 149.607994] Code: 15830000 e1a00006 e28dd008 e8bd8070 (e590307c) > > Cc: Eduardo Valentin <edubezval@gmail.com> > > Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > Applied to -next. Thanks, Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 632b8e3ff5bf..a3dae6d0082a 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -563,18 +563,10 @@ static int gpio_fan_probe(struct platform_device *pdev) err = gpio_fan_get_of_pdata(&pdev->dev, pdata); if (err) return err; - /* Optional cooling device register for Device tree platforms */ - fan_data->cdev = - thermal_of_cooling_device_register(pdev->dev.of_node, - "gpio-fan", fan_data, - &gpio_fan_cool_ops); } #else /* CONFIG_OF_GPIO */ if (!pdata) return -EINVAL; - /* Optional cooling device register for non Device tree platforms */ - fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data, - &gpio_fan_cool_ops); #endif /* CONFIG_OF_GPIO */ fan_data->pdev = pdev; @@ -604,6 +596,17 @@ static int gpio_fan_probe(struct platform_device *pdev) gpio_fan_groups); if (IS_ERR(fan_data->hwmon_dev)) return PTR_ERR(fan_data->hwmon_dev); +#ifdef CONFIG_OF_GPIO + /* Optional cooling device register for Device tree platforms */ + fan_data->cdev = thermal_of_cooling_device_register(pdev->dev.of_node, + "gpio-fan", + fan_data, + &gpio_fan_cool_ops); +#else /* CONFIG_OF_GPIO */ + /* Optional cooling device register for non Device tree platforms */ + fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data, + &gpio_fan_cool_ops); +#endif /* CONFIG_OF_GPIO */ dev_info(&pdev->dev, "GPIO fan initialized\n");
Thermal framework may already be ready and cooling policies might already be functional when we are attempting to register gpio fan as a cooling device. This can be reproduced by changing probe order in which registration of various modules are done in a system. In such a case, kernel generates an oops since the data structures are not completely populated with the wrong assumption that thermal framework is not yet ready. Fix this by reordering the thermal framework registration to occur after hwmon registration of the fan is complete. Example kernel oops: [ 149.005828] Unable to handle kernel NULL pointer dereference at virtual address 0000008c [ 149.014369] pgd = ecf48000 [ 149.017204] [0000008c] *pgd=ac065831, *pte=00000000, *ppte=00000000 [ 149.023820] Internal error: Oops: 17 [#1] SMP ARM [ 149.028745] Modules linked in: gpio_fan(+) cpufreq_dt ipv6 evdev leds_gpio led_class omap_wdt phy_omap_usb2 rtc_palmas palmas_pwrbutton tmp102 ti_soc_thermal dwc3_omap thermal_sys extcon rtc_omap rtc_ds1307 hwmon [ 149.048629] CPU: 1 PID: 1183 Comm: modprobe Not tainted 4.0.0-rc7-next-20150407-00002-g7a82da074c99 #3 [ 149.058383] Hardware name: Generic DRA74X (Flattened Device Tree) [ 149.064763] task: edec1240 ti: ec0e0000 task.ti: ec0e0000 [ 149.070421] PC is at dev_driver_string+0x0/0x38 [ 149.075165] LR is at __dev_printk+0x24/0x70 [ 149.079540] pc : [<c03d6cd0>] lr : [<c03d72c4>] psr: 20000013 [ 149.079540] sp : ec0e1c28 ip : edec1240 fp : 00000000 [ 149.091568] r10: edf3eee0 r9 : 00000000 r8 : ffffffff [ 149.097040] r7 : edf3eea0 r6 : 00000034 r5 : 00000010 r4 : ec0e1c44 [ 149.103871] r3 : ec0e1c4c r2 : ec0e1c44 r1 : c079d800 r0 : 00000010 [ 149.110709] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 149.118182] Control: 10c5387d Table: acf4806a DAC: 00000015 [ 149.124198] Process modprobe (pid: 1183, stack limit = 0xec0e0218) [ 149.130673] Stack: (0xec0e1c28 to 0xec0e2000) [ 149.135235] 1c20: 60000013 c05e2ae0 00000000 edf3ec00 ec934a10 c03d73d4 ... [ 149.392230] 1fe0: befe1888 befe1878 00019418 b6ea08f0 80000010 00000003 00000000 00000000 [ 149.400798] [<c03d6cd0>] (dev_driver_string) from [<c03d72c4>] (__dev_printk+0x24/0x70) [ 149.409193] [<c03d72c4>] (__dev_printk) from [<c03d73d4>] (dev_warn+0x34/0x48) [ 149.416767] [<c03d73d4>] (dev_warn) from [<bf0f54fc>] (get_fan_speed_index+0x94/0xa4 [gpio_fan]) [ 149.425980] [<bf0f54fc>] (get_fan_speed_index [gpio_fan]) from [<bf0f5524>] (gpio_fan_get_cur_state+0x18/0x30 [gpio_fan]) [ 149.437476] [<bf0f5524>] (gpio_fan_get_cur_state [gpio_fan]) from [<bf02767c>] (thermal_zone_trip_update+0xe8/0x2a4 [thermal_sys]) [ 149.449794] [<bf02767c>] (thermal_zone_trip_update [thermal_sys]) from [<bf027844>] (step_wise_throttle+0xc/0x74 [thermal_sys]) [ 149.461832] [<bf027844>] (step_wise_throttle [thermal_sys]) from [<bf024ff4>] (handle_thermal_trip+0x5c/0x188 [thermal_sys]) [ 149.473603] [<bf024ff4>] (handle_thermal_trip [thermal_sys]) from [<bf0256c4>] (thermal_zone_device_update+0x94/0x108 [thermal_sys]) [ 149.486104] [<bf0256c4>] (thermal_zone_device_update [thermal_sys]) from [<bf026470>] (__thermal_cooling_device_register+0x2e8/0x374 [thermal_sys]) [ 149.499956] [<bf026470>] (__thermal_cooling_device_register [thermal_sys]) from [<bf0f58e4>] (gpio_fan_probe+0x350/0x4d0 [gpio_fan]) [ 149.512438] [<bf0f58e4>] (gpio_fan_probe [gpio_fan]) from [<c03db8a0>] (platform_drv_probe+0x48/0x98) [ 149.522109] [<c03db8a0>] (platform_drv_probe) from [<c03da30c>] (driver_probe_device+0x1b0/0x26c) [ 149.531399] [<c03da30c>] (driver_probe_device) from [<c03da45c>] (__driver_attach+0x94/0x98) [ 149.540238] [<c03da45c>] (__driver_attach) from [<c03d8bb0>] (bus_for_each_dev+0x54/0x88) [ 149.548814] [<c03d8bb0>] (bus_for_each_dev) from [<c03d9a34>] (bus_add_driver+0xdc/0x1d4) [ 149.557381] [<c03d9a34>] (bus_add_driver) from [<c03dac30>] (driver_register+0x78/0xf4) [ 149.565765] [<c03dac30>] (driver_register) from [<c0009784>] (do_one_initcall+0x80/0x1d8) [ 149.574340] [<c0009784>] (do_one_initcall) from [<c00c2278>] (do_init_module+0x5c/0x1b8) [ 149.582833] [<c00c2278>] (do_init_module) from [<c00c3bbc>] (load_module+0x1720/0x1dcc) [ 149.591212] [<c00c3bbc>] (load_module) from [<c00c43d0>] (SyS_finit_module+0x68/0x6c) [ 149.599418] [<c00c43d0>] (SyS_finit_module) from [<c000f3c0>] (ret_fast_syscall+0x0/0x4c) [ 149.607994] Code: 15830000 e1a00006 e28dd008 e8bd8070 (e590307c) Cc: Eduardo Valentin <edubezval@gmail.com> Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Signed-off-by: Nishanth Menon <nm@ti.com> --- Reproduced on next-20150407 tag. drivers/hwmon/gpio-fan.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)