diff mbox

[1/1] ARM: dts: DRA72: switch to cpsw slave0 for ethernet

Message ID 1434963824-11413-1-git-send-email-mugunthanvnm@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mugunthan V N June 22, 2015, 9:03 a.m. UTC 
From: Vignesh R <vigneshr@ti.com>

On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw
slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to
select cpsw slave0.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/dra72-evm.dts | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

Comments

Tony Lindgren July 14, 2015, 11:08 a.m. UTC | #1 
* Mugunthan V N <mugunthanvnm@ti.com> [150622 02:05]:
> From: Vignesh R <vigneshr@ti.com>
> 
> On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw
> slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to
> select cpsw slave0.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

Applying into omap-for-v4.3/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index ce0390f..b05d123 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -274,6 +274,12 @@ 
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		cpsw_sel_s0 {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
 	};
 };
 
@@ -481,9 +487,10 @@ 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
@@ -492,7 +499,6 @@ 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	active_slave = <1>;
 };
 
 &dcan1 {