diff mbox

[3/3] ARM: DRA7: hwmod: Fix DCAN1 stuck in transition

Message ID 1435061394-20379-4-git-send-email-rogerq@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Roger Quadros June 23, 2015, 12:09 p.m. UTC 
Add HWMOD_CLKDM_NOAUTO flag to DCAN1 module.

Without this DCAN1 module remains stuck in transition
after the CAN interface is brought down.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 0e64c2f..db67b44 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -338,6 +338,7 @@  static struct omap_hwmod dra7xx_dcan1_hwmod = {
 	.class		= &dra7xx_dcan_hwmod_class,
 	.clkdm_name	= "wkupaon_clkdm",
 	.main_clk	= "dcan1_sys_clk_mux",
+	.flags		= HWMOD_CLKDM_NOAUTO,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,