diff mbox

[33/37] ARM: dts: omap3-tao3530: Fix regulator enable GPIO polarity

Message ID 1444684386-17094-34-git-send-email-laurent.pinchart@ideasonboard.com
State New, archived
Headers show

Commit Message

Laurent Pinchart Oct. 12, 2015, 9:13 p.m. UTC
The enable GPIO is active low, but is flagged as active high in the gpio
property. As the gpio property flags are currently unused by the driver
this doesn't cause any issue for now, but will break later if the driver
starts making use of the flags. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/boot/dts/omap3-tao3530.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Cc: linux-omap@vger.kernel.org
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index a520b4fdcf20..68f75be5d99a 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -37,7 +37,7 @@ 
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};