| Message ID | 1486135491-14223-2-git-send-email-lukma@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > The "opp_high" property brings support for 1.5 GHz CPU frequency for TI's > am57xx line of processors. > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > --- > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index a860a56..5e678cd 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -108,6 +108,11 @@ > opp-hz = /bits/ 64 <1176000000>; > opp-microvolt = <1160000 885000 1160000>; > }; > + > + opp_high@1500000000 { > + opp-hz = /bits/ 64 <1500000000>; > + opp-microvolt = <1210000 950000 1250000>; > + }; > }; > > /* > Please keep this out of the way till we get the AVS class0 integrated in. devices wont be save at 1.5GHz without the opp powerdomain + AVS Class0 implementation.
On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > The "opp_high" property brings support for 1.5 GHz CPU frequency for TI's > am57xx line of processors. > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > --- > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > This can't be blindly enabled for all am57xx SoCs, there is a forthcoming ti-cpufreq [1] driver that is needed that will decided which OPPs can and cannot be enabled for the specific variant in use. Regards, Dave [1] http://www.spinics.net/lists/devicetree/msg158967.html > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index a860a56..5e678cd 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -108,6 +108,11 @@ > opp-hz = /bits/ 64 <1176000000>; > opp-microvolt = <1160000 885000 1160000>; > }; > + > + opp_high@1500000000 { > + opp-hz = /bits/ 64 <1500000000>; > + opp-microvolt = <1210000 950000 1250000>; > + }; > }; > > /* > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Nishanth, > On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > > The "opp_high" property brings support for 1.5 GHz CPU frequency > > for TI's am57xx line of processors. > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > --- > > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/dra7.dtsi > > b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 > > --- a/arch/arm/boot/dts/dra7.dtsi > > +++ b/arch/arm/boot/dts/dra7.dtsi > > @@ -108,6 +108,11 @@ > > opp-hz = /bits/ 64 <1176000000>; > > opp-microvolt = <1160000 885000 1160000>; > > }; > > + > > + opp_high@1500000000 { > > + opp-hz = /bits/ 64 <1500000000>; > > + opp-microvolt = <1210000 950000 1250000>; > > + }; > > }; > > > > /* > > > Please keep this out of the way till we get the AVS class0 integrated > in. devices wont be save at 1.5GHz without the opp powerdomain + AVS > Class0 implementation. > Yes, correct. My AM5728 works with this opp, but AM5718 hangs when this frequency is enabled. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 3, 2017 at 5:06 PM, Lukasz Majewski <lukma@denx.de> wrote: [...] >> > + opp_high@1500000000 { >> > + opp-hz = /bits/ 64 <1500000000>; >> > + opp-microvolt = <1210000 950000 1250000>; >> > + }; >> > }; >> > >> > /* >> > >> Please keep this out of the way till we get the AVS class0 integrated >> in. devices wont be save at 1.5GHz without the opp powerdomain + AVS >> Class0 implementation. >> > > Yes, correct. My AM5728 works with this opp, but AM5718 hangs when this > frequency is enabled. Right, and if you leave it on for too long without avs class0, you might need a new silicon as well :( If you'd like to help, I saw Dave's response, it will be good if you can help us get the dependencies out of the way to enable 1.5G cleanly.
Hi Dave, Thanks for sharing the knowledge :-) > On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > > The "opp_high" property brings support for 1.5 GHz CPU frequency > > for TI's am57xx line of processors. > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > --- > > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > This can't be blindly enabled for all am57xx SoCs, Yes, I'm fully aware of AVS, which uses fuses and SoC silicon revision to assess if frequency can be enabled. Example from my playground: - AM5728 works with 1.5 GHz enabled - AM5718 hangs when I try to enable 1.5 GHz frequency > there is a > forthcoming ti-cpufreq [1] driver I've backported and tested this code on v4.9 vanilla. It works :-) > that is needed that will decided > which OPPs can and cannot be enabled for the specific variant in use. I do have a question: Do you know the correct opp-supported-hw value for 1.5 GHz on AM57x8 SoC? In TI's SDK Linux (v4.4): opp-supported-hw = <0xFF 0x04>; but this seems to be always enabled (and not taking silicon revision and efuse into account). For my use case it would be best to see what data should prevent my AM5718 from 1.5 GHz OPP. In other words I need to be 100% sure that my silicon SoC version doesn't support the 1.5 GHz frequency. > > Regards, > Dave > > [1] http://www.spinics.net/lists/devicetree/msg158967.html > > > diff --git a/arch/arm/boot/dts/dra7.dtsi > > b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 > > --- a/arch/arm/boot/dts/dra7.dtsi > > +++ b/arch/arm/boot/dts/dra7.dtsi > > @@ -108,6 +108,11 @@ > > opp-hz = /bits/ 64 <1176000000>; > > opp-microvolt = <1160000 885000 1160000>; > > }; > > + > > + opp_high@1500000000 { > > + opp-hz = /bits/ 64 <1500000000>; > > + opp-microvolt = <1210000 950000 1250000>; > > + }; > > }; > > > > /* > > > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/03/2017 05:21 PM, Lukasz Majewski wrote: > Hi Dave, > > Thanks for sharing the knowledge :-) > >> On 02/03/2017 09:24 AM, Lukasz Majewski wrote: >>> The "opp_high" property brings support for 1.5 GHz CPU frequency >>> for TI's am57xx line of processors. >>> >>> Signed-off-by: Lukasz Majewski <lukma@denx.de> >>> --- >>> arch/arm/boot/dts/dra7.dtsi | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >> >> This can't be blindly enabled for all am57xx SoCs, > > Yes, I'm fully aware of AVS, which uses fuses and SoC silicon revision > to assess if frequency can be enabled. > > Example from my playground: > > - AM5728 works with 1.5 GHz enabled > > - AM5718 hangs when I try to enable 1.5 GHz frequency > > >> there is a >> forthcoming ti-cpufreq [1] driver > > I've backported and tested this code on v4.9 vanilla. It works :-) > >> that is needed that will decided >> which OPPs can and cannot be enabled for the specific variant in use. > > I do have a question: > > Do you know the correct opp-supported-hw value for 1.5 GHz on AM57x8 > SoC? > In TI's SDK Linux (v4.4): opp-supported-hw = <0xFF 0x04>; but this seems > to be always enabled (and not taking silicon revision and efuse into > account). There is a TISDK 4.9 being built up as well (we typically do let the driver soak for a test cycle prior to posting it upstream) but if it is of interest.. it should match the version Dave posted upstream.. http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/ti-lsk-linux-4.9.y/arch/arm/boot/dts/dra7.dtsi#line100 > For my use case it would be best to see what data should prevent my > AM5718 from 1.5 GHz OPP. > > In other words I need to be 100% sure that my silicon SoC version > doesn't support the 1.5 GHz frequency. > look at dra7_efuse_xlate which does a speed grade decode of the speeds permitted.. a value of 15 or 23 should permit 1.5GHz. those are common for DRA7/AM57 SoCs. If the efuses seem set for 1.5GHz, the chip should be capable of 1.5GHz, i'd start suspecting regulators, slew rates and the like. http://www.ti.com/lit/pdf/spruhz7 rev d: page 371 -> 23 (0x17) = X speed designator Refer to device DM for supported speed grades for a given device, and the definition for supported speed grades. So, if you go to http://www.ti.com/product/AM5718/datasheet/specifications#SWPS043-7245x -> you will see the "X" designator in AM5718xxX which does support 23 and 1.5GHz. Now, if you did get one of the pre-production samples, it is possible to have efuses slightly messed up on very initial samples - at least internally, we have had them replaced and none of those samples should have exited TI.. but mistakes might happen.. if the efuse value does not meet the speed grade in documentation, then, please contact TI FAE your company works with and let them know for what to do alternatively, you can also file it on e2e.ti.com for further support.
Hi Nishanth, > On 02/03/2017 05:21 PM, Lukasz Majewski wrote: > > Hi Dave, > > > > Thanks for sharing the knowledge :-) > > > >> On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > >>> The "opp_high" property brings support for 1.5 GHz CPU frequency > >>> for TI's am57xx line of processors. > >>> > >>> Signed-off-by: Lukasz Majewski <lukma@denx.de> > >>> --- > >>> arch/arm/boot/dts/dra7.dtsi | 5 +++++ > >>> 1 file changed, 5 insertions(+) > >>> > >> > >> This can't be blindly enabled for all am57xx SoCs, > > > > Yes, I'm fully aware of AVS, which uses fuses and SoC silicon > > revision to assess if frequency can be enabled. > > > > Example from my playground: > > > > - AM5728 works with 1.5 GHz enabled > > > > - AM5718 hangs when I try to enable 1.5 GHz frequency > > > > > >> there is a > >> forthcoming ti-cpufreq [1] driver > > > > I've backported and tested this code on v4.9 vanilla. It works :-) > > > >> that is needed that will decided > >> which OPPs can and cannot be enabled for the specific variant in > >> use. > > > > I do have a question: > > > > Do you know the correct opp-supported-hw value for 1.5 GHz on AM57x8 > > SoC? > > In TI's SDK Linux (v4.4): opp-supported-hw = <0xFF 0x04>; but this > > seems to be always enabled (and not taking silicon revision and > > efuse into account). > > There is a TISDK 4.9 being built up as well (we typically do let the > driver soak for a test cycle prior to posting it upstream) but if it > is of interest.. it should match the version Dave posted upstream.. > > http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/ti-lsk-linux-4.9.y/arch/arm/boot/dts/dra7.dtsi#line100 This opp_table0 DTS node definition is different than the one sent to ML by Dave (e.g. opp-microvolt has different definition). > > > For my use case it would be best to see what data should prevent my > > AM5718 from 1.5 GHz OPP. > > > > In other words I need to be 100% sure that my silicon SoC version > > doesn't support the 1.5 GHz frequency. > > > > look at dra7_efuse_xlate which does a speed grade decode of the > speeds permitted.. a value of 15 or 23 should permit 1.5GHz. those > are common for DRA7/AM57 SoCs. Ok, I've checked this and both SoCs have value 23, so they should support 1.5 GHz operation. Hence, the AM5718 should not hang. > > If the efuses seem set for 1.5GHz, the chip should be capable of > 1.5GHz, i'd start suspecting regulators, slew rates and the like. Then I do need to examine them. > > http://www.ti.com/lit/pdf/spruhz7 > rev d: page 371 -> 23 (0x17) = X speed designator Refer to device DM > for supported speed grades for a given device, and the definition for > supported speed grades. > So, if you go to > http://www.ti.com/product/AM5718/datasheet/specifications#SWPS043-7245x > -> you will see the "X" designator in AM5718xxX which does support 23 > and 1.5GHz. Yes, correct. > > > Now, if you did get one of the pre-production samples, Is there any prod_id (or any other register value), which indicates the production sample? > it is possible > to have efuses slightly messed up on very initial samples - at least > internally, we have had them replaced and none of those samples > should have exited TI.. but mistakes might happen.. if the efuse > value does not meet the speed grade in documentation, then, please > contact TI FAE your company works with and let them know for what to > do alternatively, you can also file it on e2e.ti.com for further > support. > Thanks for support. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dave, > On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > > The "opp_high" property brings support for 1.5 GHz CPU frequency > > for TI's am57xx line of processors. > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > --- > > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > This can't be blindly enabled for all am57xx SoCs, there is a > forthcoming ti-cpufreq [1] driver that is needed that will decided > which OPPs can and cannot be enabled for the specific variant in use. Do you know if there is ongoing work on using Avs0 voltage (encoded in efuse) to control the per SoC PMIC voltage value when switching to opp_high (1.5 GHz)? > > Regards, > Dave > > [1] http://www.spinics.net/lists/devicetree/msg158967.html > > > diff --git a/arch/arm/boot/dts/dra7.dtsi > > b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 > > --- a/arch/arm/boot/dts/dra7.dtsi > > +++ b/arch/arm/boot/dts/dra7.dtsi > > @@ -108,6 +108,11 @@ > > opp-hz = /bits/ 64 <1176000000>; > > opp-microvolt = <1160000 885000 1160000>; > > }; > > + > > + opp_high@1500000000 { > > + opp-hz = /bits/ 64 <1500000000>; > > + opp-microvolt = <1210000 950000 1250000>; > > + }; > > }; > > > > /* > > > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 02/06/2017 08:24 AM, Lukasz Majewski wrote: > Hi Dave, > >> On 02/03/2017 09:24 AM, Lukasz Majewski wrote: >>> The "opp_high" property brings support for 1.5 GHz CPU frequency >>> for TI's am57xx line of processors. >>> >>> Signed-off-by: Lukasz Majewski <lukma@denx.de> >>> --- >>> arch/arm/boot/dts/dra7.dtsi | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >> >> This can't be blindly enabled for all am57xx SoCs, there is a >> forthcoming ti-cpufreq [1] driver that is needed that will decided >> which OPPs can and cannot be enabled for the specific variant in use. > > Do you know if there is ongoing work on using Avs0 voltage (encoded in > efuse) to control the per SoC PMIC voltage value when switching to > opp_high (1.5 GHz)? Yes, Viresh Kumar introduced multi-regulator support in the OPP core recently [1] which I wrote a test driver for here [2] which hooks into the OPP framework to do both ABB regulator scaling and also programs the AVS0 voltages. The current implementation I have cleaned up will depend on the ti-cpufreq driver so once that is merged I will send the AVS0 and ABB support driver upstream as well. If you are curious you can look at current internal implementation here [3]. Regards, Dave [1] http://www.spinics.net/lists/devicetree/msg153212.html [2] https://www.spinics.net/lists/kernel/msg2384336.html [3] http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/ti-lsk-linux-4.9.y/drivers/base/power/opp/ti-opp-supply.c > > >> >> Regards, >> Dave >> >> [1] http://www.spinics.net/lists/devicetree/msg158967.html >> >>> diff --git a/arch/arm/boot/dts/dra7.dtsi >>> b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 >>> --- a/arch/arm/boot/dts/dra7.dtsi >>> +++ b/arch/arm/boot/dts/dra7.dtsi >>> @@ -108,6 +108,11 @@ >>> opp-hz = /bits/ 64 <1176000000>; >>> opp-microvolt = <1160000 885000 1160000>; >>> }; >>> + >>> + opp_high@1500000000 { >>> + opp-hz = /bits/ 64 <1500000000>; >>> + opp-microvolt = <1210000 950000 1250000>; >>> + }; >>> }; >>> >>> /* >>> >> > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dave, > Hi, > On 02/06/2017 08:24 AM, Lukasz Majewski wrote: > > Hi Dave, > > > >> On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > >>> The "opp_high" property brings support for 1.5 GHz CPU frequency > >>> for TI's am57xx line of processors. > >>> > >>> Signed-off-by: Lukasz Majewski <lukma@denx.de> > >>> --- > >>> arch/arm/boot/dts/dra7.dtsi | 5 +++++ > >>> 1 file changed, 5 insertions(+) > >>> > >> > >> This can't be blindly enabled for all am57xx SoCs, there is a > >> forthcoming ti-cpufreq [1] driver that is needed that will decided > >> which OPPs can and cannot be enabled for the specific variant in > >> use. > > > > Do you know if there is ongoing work on using Avs0 voltage (encoded > > in efuse) to control the per SoC PMIC voltage value when switching > > to opp_high (1.5 GHz)? > > Yes, Viresh Kumar introduced multi-regulator support in the OPP core > recently [1] which I wrote a test driver for here [2] which hooks > into the OPP framework to do both ABB regulator scaling and also > programs the AVS0 voltages. Thanks for sharing this info. > The current implementation I have cleaned > up will depend on the ti-cpufreq driver so once that is merged I will > send the AVS0 and ABB support driver upstream as well. The ti-cpufreq.c seems to be solid and working, so I hope that it will be merged sooner than latter. > If you are > curious you can look at current internal implementation here [3]. I will try it. > > Regards, > Dave > > [1] http://www.spinics.net/lists/devicetree/msg153212.html > [2] https://www.spinics.net/lists/kernel/msg2384336.html > [3] > http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/ti-lsk-linux-4.9.y/drivers/base/power/opp/ti-opp-supply.c > > > > > > > >> > >> Regards, > >> Dave > >> > >> [1] http://www.spinics.net/lists/devicetree/msg158967.html > >> > >>> diff --git a/arch/arm/boot/dts/dra7.dtsi > >>> b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 > >>> --- a/arch/arm/boot/dts/dra7.dtsi > >>> +++ b/arch/arm/boot/dts/dra7.dtsi > >>> @@ -108,6 +108,11 @@ > >>> opp-hz = /bits/ 64 <1176000000>; > >>> opp-microvolt = <1160000 885000 1160000>; > >>> }; > >>> + > >>> + opp_high@1500000000 { > >>> + opp-hz = /bits/ 64 <1500000000>; > >>> + opp-microvolt = <1210000 950000 1250000>; > >>> + }; > >>> }; > >>> > >>> /* > >>> > >> > > > > > > > > > > Best regards, > > > > Lukasz Majewski > > > > -- > > > > DENX Software Engineering GmbH, Managing Director: Wolfgang > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, > > Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: > > wd@denx.de > > > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a860a56..5e678cd 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -108,6 +108,11 @@ opp-hz = /bits/ 64 <1176000000>; opp-microvolt = <1160000 885000 1160000>; }; + + opp_high@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1210000 950000 1250000>; + }; }; /*
The "opp_high" property brings support for 1.5 GHz CPU frequency for TI's am57xx line of processors. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- arch/arm/boot/dts/dra7.dtsi | 5 +++++ 1 file changed, 5 insertions(+)