diff mbox

[v7,5/8] can: m_can: Add PM Support

Message ID 1515581725-29242-6-git-send-email-faiz_abbas@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Faiz Abbas Jan. 10, 2018, 10:55 a.m. UTC
From: Franklin S Cooper Jr <fcooper@ti.com>

Add support for CONFIG_PM which is the new way to handle managing clocks.

Move the clock management to pm_runtime_resume() and pm_runtime_suspend()
callbacks for the driver.

CONFIG_PM is required by OMAP based devices to handle clock management.
Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
to work with this driver.

Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
[nsekhar@ti.com: handle pm_runtime_get_sync() failure, fix some bugs]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/net/can/m_can/m_can.c | 95 ++++++++++++++++++++++++++++---------------
 1 file changed, 62 insertions(+), 33 deletions(-)

Comments

Marc Kleine-Budde Jan. 15, 2018, 1:55 p.m. UTC | #1
On 01/10/2018 11:55 AM, Faiz Abbas wrote:
> From: Franklin S Cooper Jr <fcooper@ti.com>
> 
> Add support for CONFIG_PM which is the new way to handle managing clocks.
> 
> Move the clock management to pm_runtime_resume() and pm_runtime_suspend()
> callbacks for the driver.
> 
> CONFIG_PM is required by OMAP based devices to handle clock management.
> Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
> to work with this driver.
> 
> Reviewed-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> [nsekhar@ti.com: handle pm_runtime_get_sync() failure, fix some bugs]
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>  drivers/net/can/m_can/m_can.c | 95 ++++++++++++++++++++++++++++---------------
>  1 file changed, 62 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 07ebe7f..f5c5028 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/iopoll.h>
>  #include <linux/can/dev.h>
>  
> @@ -625,21 +626,16 @@ static int m_can_clk_start(struct m_can_priv *priv)
>  {
>  	int err;
>  
> -	err = clk_prepare_enable(priv->hclk);
> -	if (err)
> -		return err;
> -
> -	err = clk_prepare_enable(priv->cclk);
> +	err = pm_runtime_get_sync(priv->device);
>  	if (err)
> -		clk_disable_unprepare(priv->hclk);
> +		pm_runtime_put_noidle(priv->device);
>  
>  	return err;
>  }
>  
>  static void m_can_clk_stop(struct m_can_priv *priv)
>  {
> -	clk_disable_unprepare(priv->cclk);
> -	clk_disable_unprepare(priv->hclk);
> +	pm_runtime_put_sync(priv->device);
>  }
>  
>  static int m_can_get_berr_counter(const struct net_device *dev,
> @@ -1561,37 +1557,26 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  		goto failed_ret;
>  	}
>  
> -	/* Enable clocks. Necessary to read Core Release in order to determine
> -	 * M_CAN version
> -	 */
> -	ret = clk_prepare_enable(hclk);
> -	if (ret)
> -		goto disable_hclk_ret;
> -
> -	ret = clk_prepare_enable(cclk);
> -	if (ret)
> -		goto disable_cclk_ret;
> -
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>  	addr = devm_ioremap_resource(&pdev->dev, res);
>  	irq = platform_get_irq_byname(pdev, "int0");
>  
>  	if (IS_ERR(addr) || irq < 0) {
>  		ret = -EINVAL;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* message ram could be shared */
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>  	if (!res) {
>  		ret = -ENODEV;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>  	if (!mram_addr) {
>  		ret = -ENOMEM;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* get message ram configuration */
> @@ -1600,7 +1585,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  					 sizeof(mram_config_vals) / 4);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* Get TX FIFO size
> @@ -1612,13 +1597,9 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
>  	if (!dev) {
>  		ret = -ENOMEM;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
> -	ret = setup_m_can_dev(pdev, dev, addr);
> -	if (ret)
> -		goto disable_cclk_ret;
> -
>  	priv = netdev_priv(dev);
>  	dev->irq = irq;
>  	priv->device = &pdev->dev;
> @@ -1632,6 +1613,20 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, dev);
>  	SET_NETDEV_DEV(dev, &pdev->dev);
>  
> +	/* Enable clocks. Necessary to read Core Release in order to determine
> +	 * M_CAN version
> +	 */
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);

Why don't you make use of m_can_clk_start() here?

> +	if (ret)  {
> +		pm_runtime_put_noidle(&pdev->dev);
> +		goto pm_runtime_fail;
> +	}
> +
> +	ret = setup_m_can_dev(pdev, dev, addr);
> +	if (ret)
> +		goto pm_runtime_put;
> +
>  	ret = register_m_can_dev(dev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
> @@ -1650,14 +1645,15 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	 * Stop clocks. They will be reactivated once the M_CAN device is opened
>  	 */
>  
> -	goto disable_cclk_ret;
> +	goto pm_runtime_put;
>  
>  failed_free_dev:
>  	free_m_can_dev(dev);
> -disable_cclk_ret:
> -	clk_disable_unprepare(cclk);
> -disable_hclk_ret:
> -	clk_disable_unprepare(hclk);
> +pm_runtime_put:
> +	pm_runtime_put_sync(&pdev->dev);
> +pm_runtime_fail:
> +	if (ret)
> +		pm_runtime_disable(&pdev->dev);
>  failed_ret:
>  	return ret;
>  }
> @@ -1715,6 +1711,9 @@ static int m_can_plat_remove(struct platform_device *pdev)
>  	struct net_device *dev = platform_get_drvdata(pdev);
>  
>  	unregister_m_can_dev(dev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +
>  	platform_set_drvdata(pdev, NULL);
>  
>  	free_m_can_dev(dev);
> @@ -1722,7 +1721,37 @@ static int m_can_plat_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +int m_can_runtime_suspend(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *priv = netdev_priv(ndev);
> +
> +	clk_disable_unprepare(priv->cclk);
> +	clk_disable_unprepare(priv->hclk);
> +
> +	return 0;
> +}
> +
> +int m_can_runtime_resume(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *priv = netdev_priv(ndev);
> +	int err;
> +
> +	err = clk_prepare_enable(priv->hclk);
> +	if (err)
> +		return err;
> +
> +	err = clk_prepare_enable(priv->cclk);
> +	if (err)
> +		clk_disable_unprepare(priv->hclk);
> +
> +	return err;
> +}
> +
>  static const struct dev_pm_ops m_can_pmops = {
> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
> +			   m_can_runtime_resume, NULL)
>  	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>  };
>  
> 

Marc
Faiz Abbas Jan. 16, 2018, 11:05 a.m. UTC | #2
Hi,

On Monday 15 January 2018 07:25 PM, Marc Kleine-Budde wrote:
> On 01/10/2018 11:55 AM, Faiz Abbas wrote:
>> From: Franklin S Cooper Jr <fcooper@ti.com>
>>
>> Add support for CONFIG_PM which is the new way to handle managing clocks.
>>
>> Move the clock management to pm_runtime_resume() and pm_runtime_suspend()
>> callbacks for the driver.
>>
>> CONFIG_PM is required by OMAP based devices to handle clock management.
>> Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
>> to work with this driver.
>>
>> Reviewed-by: Suman Anna <s-anna@ti.com>
>> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
>> [nsekhar@ti.com: handle pm_runtime_get_sync() failure, fix some bugs]
>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> ---
>>  drivers/net/can/m_can/m_can.c | 95 ++++++++++++++++++++++++++++---------------
>>  1 file changed, 62 insertions(+), 33 deletions(-)
>>
>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
>> index 07ebe7f..f5c5028 100644
>> --- a/drivers/net/can/m_can/m_can.c
>> +++ b/drivers/net/can/m_can/m_can.c
>> @@ -23,6 +23,7 @@
>>  #include <linux/of.h>
>>  #include <linux/of_device.h>
>>  #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>>  #include <linux/iopoll.h>
>>  #include <linux/can/dev.h>
>>  
>> @@ -625,21 +626,16 @@ static int m_can_clk_start(struct m_can_priv *priv)
>>  {
>>  	int err;
>>  
>> -	err = clk_prepare_enable(priv->hclk);
>> -	if (err)
>> -		return err;
>> -
>> -	err = clk_prepare_enable(priv->cclk);
>> +	err = pm_runtime_get_sync(priv->device);
>>  	if (err)
>> -		clk_disable_unprepare(priv->hclk);
>> +		pm_runtime_put_noidle(priv->device);
>>  
>>  	return err;
>>  }
>>  
>>  static void m_can_clk_stop(struct m_can_priv *priv)
>>  {
>> -	clk_disable_unprepare(priv->cclk);
>> -	clk_disable_unprepare(priv->hclk);
>> +	pm_runtime_put_sync(priv->device);
>>  }
>>  
>>  static int m_can_get_berr_counter(const struct net_device *dev,
>> @@ -1561,37 +1557,26 @@ static int m_can_plat_probe(struct platform_device *pdev)
>>  		goto failed_ret;
>>  	}
>>  
>> -	/* Enable clocks. Necessary to read Core Release in order to determine
>> -	 * M_CAN version
>> -	 */
>> -	ret = clk_prepare_enable(hclk);
>> -	if (ret)
>> -		goto disable_hclk_ret;
>> -
>> -	ret = clk_prepare_enable(cclk);
>> -	if (ret)
>> -		goto disable_cclk_ret;
>> -
>>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>>  	addr = devm_ioremap_resource(&pdev->dev, res);
>>  	irq = platform_get_irq_byname(pdev, "int0");
>>  
>>  	if (IS_ERR(addr) || irq < 0) {
>>  		ret = -EINVAL;
>> -		goto disable_cclk_ret;
>> +		goto failed_ret;
>>  	}
>>  
>>  	/* message ram could be shared */
>>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>>  	if (!res) {
>>  		ret = -ENODEV;
>> -		goto disable_cclk_ret;
>> +		goto failed_ret;
>>  	}
>>  
>>  	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>>  	if (!mram_addr) {
>>  		ret = -ENOMEM;
>> -		goto disable_cclk_ret;
>> +		goto failed_ret;
>>  	}
>>  
>>  	/* get message ram configuration */
>> @@ -1600,7 +1585,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>>  					 sizeof(mram_config_vals) / 4);
>>  	if (ret) {
>>  		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
>> -		goto disable_cclk_ret;
>> +		goto failed_ret;
>>  	}
>>  
>>  	/* Get TX FIFO size
>> @@ -1612,13 +1597,9 @@ static int m_can_plat_probe(struct platform_device *pdev)
>>  	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
>>  	if (!dev) {
>>  		ret = -ENOMEM;
>> -		goto disable_cclk_ret;
>> +		goto failed_ret;
>>  	}
>>  
>> -	ret = setup_m_can_dev(pdev, dev, addr);
>> -	if (ret)
>> -		goto disable_cclk_ret;
>> -
>>  	priv = netdev_priv(dev);
>>  	dev->irq = irq;
>>  	priv->device = &pdev->dev;
>> @@ -1632,6 +1613,20 @@ static int m_can_plat_probe(struct platform_device *pdev)
>>  	platform_set_drvdata(pdev, dev);
>>  	SET_NETDEV_DEV(dev, &pdev->dev);
>>  
>> +	/* Enable clocks. Necessary to read Core Release in order to determine
>> +	 * M_CAN version
>> +	 */
>> +	pm_runtime_enable(&pdev->dev);
>> +	ret = pm_runtime_get_sync(&pdev->dev);
> 
> Why don't you make use of m_can_clk_start() here?
> 

Sure. Will replace.

Thanks,
Faiz
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 07ebe7f..f5c5028 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -23,6 +23,7 @@ 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 
@@ -625,21 +626,16 @@  static int m_can_clk_start(struct m_can_priv *priv)
 {
 	int err;
 
-	err = clk_prepare_enable(priv->hclk);
-	if (err)
-		return err;
-
-	err = clk_prepare_enable(priv->cclk);
+	err = pm_runtime_get_sync(priv->device);
 	if (err)
-		clk_disable_unprepare(priv->hclk);
+		pm_runtime_put_noidle(priv->device);
 
 	return err;
 }
 
 static void m_can_clk_stop(struct m_can_priv *priv)
 {
-	clk_disable_unprepare(priv->cclk);
-	clk_disable_unprepare(priv->hclk);
+	pm_runtime_put_sync(priv->device);
 }
 
 static int m_can_get_berr_counter(const struct net_device *dev,
@@ -1561,37 +1557,26 @@  static int m_can_plat_probe(struct platform_device *pdev)
 		goto failed_ret;
 	}
 
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	ret = clk_prepare_enable(hclk);
-	if (ret)
-		goto disable_hclk_ret;
-
-	ret = clk_prepare_enable(cclk);
-	if (ret)
-		goto disable_cclk_ret;
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
 	addr = devm_ioremap_resource(&pdev->dev, res);
 	irq = platform_get_irq_byname(pdev, "int0");
 
 	if (IS_ERR(addr) || irq < 0) {
 		ret = -EINVAL;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* message ram could be shared */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
 	if (!res) {
 		ret = -ENODEV;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (!mram_addr) {
 		ret = -ENOMEM;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* get message ram configuration */
@@ -1600,7 +1585,7 @@  static int m_can_plat_probe(struct platform_device *pdev)
 					 sizeof(mram_config_vals) / 4);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* Get TX FIFO size
@@ -1612,13 +1597,9 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
 	if (!dev) {
 		ret = -ENOMEM;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
-	ret = setup_m_can_dev(pdev, dev, addr);
-	if (ret)
-		goto disable_cclk_ret;
-
 	priv = netdev_priv(dev);
 	dev->irq = irq;
 	priv->device = &pdev->dev;
@@ -1632,6 +1613,20 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
+	/* Enable clocks. Necessary to read Core Release in order to determine
+	 * M_CAN version
+	 */
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret)  {
+		pm_runtime_put_noidle(&pdev->dev);
+		goto pm_runtime_fail;
+	}
+
+	ret = setup_m_can_dev(pdev, dev, addr);
+	if (ret)
+		goto pm_runtime_put;
+
 	ret = register_m_can_dev(dev);
 	if (ret) {
 		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
@@ -1650,14 +1645,15 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	 * Stop clocks. They will be reactivated once the M_CAN device is opened
 	 */
 
-	goto disable_cclk_ret;
+	goto pm_runtime_put;
 
 failed_free_dev:
 	free_m_can_dev(dev);
-disable_cclk_ret:
-	clk_disable_unprepare(cclk);
-disable_hclk_ret:
-	clk_disable_unprepare(hclk);
+pm_runtime_put:
+	pm_runtime_put_sync(&pdev->dev);
+pm_runtime_fail:
+	if (ret)
+		pm_runtime_disable(&pdev->dev);
 failed_ret:
 	return ret;
 }
@@ -1715,6 +1711,9 @@  static int m_can_plat_remove(struct platform_device *pdev)
 	struct net_device *dev = platform_get_drvdata(pdev);
 
 	unregister_m_can_dev(dev);
+
+	pm_runtime_disable(&pdev->dev);
+
 	platform_set_drvdata(pdev, NULL);
 
 	free_m_can_dev(dev);
@@ -1722,7 +1721,37 @@  static int m_can_plat_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int m_can_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *priv = netdev_priv(ndev);
+
+	clk_disable_unprepare(priv->cclk);
+	clk_disable_unprepare(priv->hclk);
+
+	return 0;
+}
+
+int m_can_runtime_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = clk_prepare_enable(priv->hclk);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(priv->cclk);
+	if (err)
+		clk_disable_unprepare(priv->hclk);
+
+	return err;
+}
+
 static const struct dev_pm_ops m_can_pmops = {
+	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
+			   m_can_runtime_resume, NULL)
 	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
 };