diff mbox

ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux

Message ID 1521463108-9014-1-git-send-email-aford173@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Adam Ford March 19, 2018, 12:38 p.m. UTC
commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream.

The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1.  The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at time.

This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz

Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo
DM3730 devkit")

For linux-4.4.y

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Greg KH March 19, 2018, 3:21 p.m. UTC | #1
On Mon, Mar 19, 2018 at 07:38:28AM -0500, Adam Ford wrote:
> commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream.
> 
> The pinmuxing was missing for I2C1 which was causing intermittent issues
> with the PMIC which is connected to I2C1.  The bootloader did not quite
> configure the I2C1 either, so when running at 2.6MHz, it was generating
> errors at time.
> 
> This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz
> 
> Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo
> DM3730 devkit")
> 
> For linux-4.4.y

Thanks, now applied.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 80f6c78..e056704 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -90,6 +90,8 @@ 
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -137,6 +139,12 @@ 
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {