| Message ID | 1544023171-5796-3-git-send-email-rogerq@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usb: dwc3: Add support for AM654 USB | expand |
Hi Roger, On 05/12/18 8:49 PM, Roger Quadros wrote: > The AM654 SoC from TI contains a DWC3 controller. Add > support for it. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt > index f96e09f..fa29ff8 100644 > --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt > +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt > @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller > DWC3 GLUE > > Required properties: > - - compatible: should be "ti,keystone-dwc3". > + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3". Convention is to have one compatible per line: compatible: Should be "ti,am654-dwc3" for AM654 SoCs "ti,keystone-dwc3" for K2 SoCs > - #address-cells, #size-cells : should be '1' if the device has sub-nodes > with 'reg' property. > - reg : Address and length of the register set for the USB subsystem on > @@ -21,7 +21,7 @@ SoCs only: > - clock-names: Must be "usb". > > > -The following are mandatory properties for Keystone 2 66AK2G SoCs only: > +The following are mandatory properties for 66AK2G and AM654: > > - power-domains: Should contain a phandle to a PM domain provider node > and an args specifier containing the USB device id >
Hi Vignesh, On 06/12/18 12:32, Vignesh R wrote: > Hi Roger, > > On 05/12/18 8:49 PM, Roger Quadros wrote: >> The AM654 SoC from TI contains a DWC3 controller. Add >> support for it. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> --- >> Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt >> index f96e09f..fa29ff8 100644 >> --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt >> +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt >> @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller >> DWC3 GLUE >> >> Required properties: >> - - compatible: should be "ti,keystone-dwc3". >> + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3". > > Convention is to have one compatible per line: > compatible: Should be > "ti,am654-dwc3" for AM654 SoCs > "ti,keystone-dwc3" for K2 SoCs > OK. Will fix it up. Thanks. cheers, -roger > > >> - #address-cells, #size-cells : should be '1' if the device has sub-nodes >> with 'reg' property. >> - reg : Address and length of the register set for the USB subsystem on >> @@ -21,7 +21,7 @@ SoCs only: >> - clock-names: Must be "usb". >> >> >> -The following are mandatory properties for Keystone 2 66AK2G SoCs only: >> +The following are mandatory properties for 66AK2G and AM654: >> >> - power-domains: Should contain a phandle to a PM domain provider node >> and an args specifier containing the USB device id >> >
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt index f96e09f..fa29ff8 100644 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller DWC3 GLUE Required properties: - - compatible: should be "ti,keystone-dwc3". + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3". - #address-cells, #size-cells : should be '1' if the device has sub-nodes with 'reg' property. - reg : Address and length of the register set for the USB subsystem on @@ -21,7 +21,7 @@ SoCs only: - clock-names: Must be "usb". -The following are mandatory properties for Keystone 2 66AK2G SoCs only: +The following are mandatory properties for 66AK2G and AM654: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id
The AM654 SoC from TI contains a DWC3 controller. Add support for it. Signed-off-by: Roger Quadros <rogerq@ti.com> --- Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)