Message ID | 1556024950-20752-12-git-send-email-grygorii.strashko@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | net: ethernet: ti: clean up and optimizations | expand |
On Tue, Apr 23, 2019 at 04:09:02PM +0300, Grygorii Strashko wrote: >Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood >Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port >belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is >working in non dual_mac mode, but in dual_mac - it causes >enabling/disabling ALLMULTI flag for both ports. > >Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to >specify ALE port number for which ALLMULTI has to be enabled and check if >port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. > >Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >--- > drivers/net/ethernet/ti/cpsw.c | 12 +++++++++--- > drivers/net/ethernet/ti/cpsw_ale.c | 12 ++++++++++-- > drivers/net/ethernet/ti/cpsw_ale.h | 2 +- > 3 files changed, 20 insertions(+), 6 deletions(-) > >diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c >index fe3d145846d2..c497992f01f7 100644 >--- a/drivers/net/ethernet/ti/cpsw.c >+++ b/drivers/net/ethernet/ti/cpsw.c >@@ -793,12 +793,17 @@ static int cpsw_purge_all_mc(struct net_device *ndev, const u8 *addr, int num) > > static void cpsw_ndo_set_rx_mode(struct net_device *ndev) > { >- struct cpsw_common *cpsw = ndev_to_cpsw(ndev); >+ struct cpsw_priv *priv = netdev_priv(ndev); >+ struct cpsw_common *cpsw = priv->cpsw; >+ int slave_port = -1; >+ >+ if (cpsw->data.dual_emac) >+ slave_port = priv->emac_port + 1; > > if (ndev->flags & IFF_PROMISC) { > /* Enable promiscuous mode */ > cpsw_set_promiscious(ndev, true); >- cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI); >+ cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI, slave_port); > return; > } else { > /* Disable promiscuous mode */ >@@ -806,7 +811,8 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev) > } > > /* Restore allmulti on vlans if necessary */ >- cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI); >+ cpsw_ale_set_allmulti(cpsw->ale, >+ ndev->flags & IFF_ALLMULTI, slave_port); > > /* add/remove mcast address either for real netdev or for vlan */ > __hw_addr_ref_sync_dev(&ndev->mc, ndev, cpsw_add_mc_addr, >diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c >index 83ccb422dddd..f7369982ae33 100644 >--- a/drivers/net/ethernet/ti/cpsw_ale.c >+++ b/drivers/net/ethernet/ti/cpsw_ale.c >@@ -468,11 +468,11 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask) > return 0; > } > >-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti) >+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port) > { > u32 ale_entry[ALE_ENTRY_WORDS]; >- int type, idx; > int unreg_mcast = 0; >+ int type, idx; > > /* Only bother doing the work if the setting is actually changing */ > if (ale->allmulti == allmulti) >@@ -482,10 +482,18 @@ void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti) > ale->allmulti = allmulti; Should ale->allmulti be removed? as "set" is per port now. > > for (idx = 0; idx < ale->params.ale_entries; idx++) { >+ int vlan_members; >+ > cpsw_ale_read(ale, idx, ale_entry); > type = cpsw_ale_get_entry_type(ale_entry); > if (type != ALE_TYPE_VLAN) > continue; >+ vlan_members = >+ cpsw_ale_get_vlan_member_list(ale_entry, >+ ale->vlan_field_bits); >+ >+ if (port != -1 && !(vlan_members & BIT(port))) >+ continue; > > unreg_mcast = > cpsw_ale_get_vlan_unreg_mcast(ale_entry, >diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h >index 4777d626fac8..8a0d25950dc1 100644 >--- a/drivers/net/ethernet/ti/cpsw_ale.h >+++ b/drivers/net/ethernet/ti/cpsw_ale.h >@@ -109,7 +109,7 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask, > int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag, > int reg_mcast, int unreg_mcast); > int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port); >-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti); >+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port); > > int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control); > int cpsw_ale_control_set(struct cpsw_ale *ale, int port, >-- >2.17.1 >
On Tue, Apr 23, 2019 at 04:09:02PM +0300, Grygorii Strashko wrote: >Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood >Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port >belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is >working in non dual_mac mode, but in dual_mac - it causes >enabling/disabling ALLMULTI flag for both ports. > >Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to >specify ALE port number for which ALLMULTI has to be enabled and check if >port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. > >Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >--- > drivers/net/ethernet/ti/cpsw.c | 12 +++++++++--- > drivers/net/ethernet/ti/cpsw_ale.c | 12 ++++++++++-- > drivers/net/ethernet/ti/cpsw_ale.h | 2 +- > 3 files changed, 20 insertions(+), 6 deletions(-) > [...] >+ vlan_members = >+ cpsw_ale_get_vlan_member_list(ale_entry, >+ ale->vlan_field_bits); Seems like declaration for cpsw_ale_get_vlan_member_list() is not part of the patchset
On 24.04.19 15:22, Ivan Khoronzhuk wrote: > On Tue, Apr 23, 2019 at 04:09:02PM +0300, Grygorii Strashko wrote: >> Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood >> Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port >> belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is >> working in non dual_mac mode, but in dual_mac - it causes >> enabling/disabling ALLMULTI flag for both ports. >> >> Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to >> specify ALE port number for which ALLMULTI has to be enabled and check if >> port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. >> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >> --- >> drivers/net/ethernet/ti/cpsw.c | 12 +++++++++--- >> drivers/net/ethernet/ti/cpsw_ale.c | 12 ++++++++++-- >> drivers/net/ethernet/ti/cpsw_ale.h | 2 +- >> 3 files changed, 20 insertions(+), 6 deletions(-) >> > [...] >> + vlan_members = >> + cpsw_ale_get_vlan_member_list(ale_entry, >> + ale->vlan_field_bits); > Seems like declaration for cpsw_ale_get_vlan_member_list() is not > part of the patchset > > It's define :) DEFINE_ALE_FIELD1(vlan_member_list, 0)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index fe3d145846d2..c497992f01f7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -793,12 +793,17 @@ static int cpsw_purge_all_mc(struct net_device *ndev, const u8 *addr, int num) static void cpsw_ndo_set_rx_mode(struct net_device *ndev) { - struct cpsw_common *cpsw = ndev_to_cpsw(ndev); + struct cpsw_priv *priv = netdev_priv(ndev); + struct cpsw_common *cpsw = priv->cpsw; + int slave_port = -1; + + if (cpsw->data.dual_emac) + slave_port = priv->emac_port + 1; if (ndev->flags & IFF_PROMISC) { /* Enable promiscuous mode */ cpsw_set_promiscious(ndev, true); - cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI); + cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI, slave_port); return; } else { /* Disable promiscuous mode */ @@ -806,7 +811,8 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev) } /* Restore allmulti on vlans if necessary */ - cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI); + cpsw_ale_set_allmulti(cpsw->ale, + ndev->flags & IFF_ALLMULTI, slave_port); /* add/remove mcast address either for real netdev or for vlan */ __hw_addr_ref_sync_dev(&ndev->mc, ndev, cpsw_add_mc_addr, diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c index 83ccb422dddd..f7369982ae33 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.c +++ b/drivers/net/ethernet/ti/cpsw_ale.c @@ -468,11 +468,11 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask) return 0; } -void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti) +void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port) { u32 ale_entry[ALE_ENTRY_WORDS]; - int type, idx; int unreg_mcast = 0; + int type, idx; /* Only bother doing the work if the setting is actually changing */ if (ale->allmulti == allmulti) @@ -482,10 +482,18 @@ void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti) ale->allmulti = allmulti; for (idx = 0; idx < ale->params.ale_entries; idx++) { + int vlan_members; + cpsw_ale_read(ale, idx, ale_entry); type = cpsw_ale_get_entry_type(ale_entry); if (type != ALE_TYPE_VLAN) continue; + vlan_members = + cpsw_ale_get_vlan_member_list(ale_entry, + ale->vlan_field_bits); + + if (port != -1 && !(vlan_members & BIT(port))) + continue; unreg_mcast = cpsw_ale_get_vlan_unreg_mcast(ale_entry, diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h index 4777d626fac8..8a0d25950dc1 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.h +++ b/drivers/net/ethernet/ti/cpsw_ale.h @@ -109,7 +109,7 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask, int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag, int reg_mcast, int unreg_mcast); int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port); -void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti); +void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port); int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control); int cpsw_ale_control_set(struct cpsw_ale *ale, int port,
Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is working in non dual_mac mode, but in dual_mac - it causes enabling/disabling ALLMULTI flag for both ports. Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to specify ALE port number for which ALLMULTI has to be enabled and check if port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- drivers/net/ethernet/ti/cpsw.c | 12 +++++++++--- drivers/net/ethernet/ti/cpsw_ale.c | 12 ++++++++++-- drivers/net/ethernet/ti/cpsw_ale.h | 2 +- 3 files changed, 20 insertions(+), 6 deletions(-)