[7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x

Message ID	1558704003-393769-8-git-send-email-t.remmet@phytec.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-omap-owner@kernel.org> From: Teresa Remmet <t.remmet@phytec.de> To: linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= <bcousson@baylibre.com>, Tony Lindgren <tony@atomide.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Daniel Schultz <d.schultz@phytec.de> Subject: [PATCH 7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x Date: Fri, 24 May 2019 15:20:03 +0200 Message-Id: <1558704003-393769-8-git-send-email-t.remmet@phytec.de> In-Reply-To: <1558704003-393769-1-git-send-email-t.remmet@phytec.de> References: <1558704003-393769-1-git-send-email-t.remmet@phytec.de> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk
Series	AM335x Phytec boards update \| expand [0/7] AM335x Phytec boards update [1/7] ARM: dts: am335x phytec boards: Fix cd-gpios active level [2/7] ARM: dts: am335x phytec boards: Remove regulator node [3/7] ARM: dts: am335x-phycore-som: Add emmc node [4/7] ARM: dts: am335x-phycore-som: Enable gpmc node in dts files [5/7] ARM: dts: am335x-pcm-953: Update user led names [6/7] ARM: dts: am335x-pcm-953: Remove eth phy delay [7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 1c1e48fd94b5..b301f753ed2c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -160,6 +160,9 @@ Boards: - AM335X phyCORE-AM335x: Development kit compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" +- AM335x phyBOARD-REGOR: Single Board Computer + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx" + - AM335X UC-8100-ME-T: Communication-centric industrial computing platform compatible = "moxa,uc-8100-me-t", "ti,am33xx"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..ca42400dc5e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -748,6 +748,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-pocketbeagle.dtb \ + am335x-regor-rdk.dtb \ am335x-sancloud-bbe.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts new file mode 100644 index 000000000000..66a1360b83d5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-regor-rdk.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-regor.dtsi" + +/* SoM */ +&gpmc { + status = "okay"; +}; + +&i2c_eeprom { + status = "okay"; +}; + +&serial_flash { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi new file mode 100644 index 000000000000..5aff02a95766 --- /dev/null +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/ { + model = "Phytec AM335x phyBOARD-REGOR"; + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + run_stop-led { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + error-led { + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + }; +}; + +/* User Leds */ +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ + >; + }; +}; + +/* CAN Busses */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&ethernet0_pins &ethernet1_pins>; + dual_emac = <1>; +}; + +/* GPIOs */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&user_gpios_pins>; + + user_gpios_pins: pinmux_user_gpios { + pinctrl-single,pins = < + /* DIGIN 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */ + /* DIGOUT 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RTC */ +&i2c_rtc { + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* RS485 - UART1 */ +&am33xx_pinmux { + uart1_rs485_pins: pinmux_uart1_rs485_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_rs485_pins>; + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +};

[7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x

Commit Message

Patch