diff mbox series

[v5,5/5] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs

Message ID 1597671613-20879-6-git-send-email-grzegorz.jaszczyk@linaro.org
State New
Headers show
Series Add TI PRUSS Local Interrupt Controller IRQChip driver | expand

Commit Message

Grzegorz Jaszczyk Aug. 17, 2020, 1:40 p.m. UTC
From: Suman Anna <s-anna@ti.com>

The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP,
commonly called ICSSG. The PRUSS INTC present within the ICSSG supports
more System Events (160 vs 64), more Interrupt Channels and Host Interrupts
(20 vs 10) compared to the previous generation PRUSS INTC instances. The
first 2 and the last 10 of these host interrupt lines are used by the
PRU and other auxiliary cores and sub-modules within the ICSSG, with 8
host interrupts connected to MPU. The host interrupts 5, 6, 7 are also
connected to the other ICSSG instances within the SoC and can be
partitioned as per system integration through the board dts files.

Enhance the PRUSS INTC driver to add support for this ICSSG INTC
instance.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
---
v4->v5:
- Rename: s/num_host_intrs/num_host_events/ regarding to change
  introduced in patch #2.
v3->v4:
- Move generic part to "irqchip/irq-pruss-intc: Add a PRUSS irqchip
  driver for PRUSS interrupts" patch and leave only platform related
  code.
v2->v3:
- Change patch order: use it directly after "irqchip/irq-pruss-intc:
  Implement irq_{get,set}_irqchip_state ops" and before new
  "irqchip/irq-pruss-intc: Add event mapping support" in order to reduce
  diff.
v1->v2:
- https://patchwork.kernel.org/patch/11069773/
---
 drivers/irqchip/Kconfig          | 2 +-
 drivers/irqchip/irq-pruss-intc.c | 9 +++++++++
 2 files changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index a112a76..7fe4e30 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -495,7 +495,7 @@  config TI_SCI_INTA_IRQCHIP
 
 config TI_PRUSS_INTC
 	tristate "TI PRU-ICSS Interrupt Controller"
-	depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE
+	depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3
 	select IRQ_DOMAIN
 	help
 	   This enables support for the PRU-ICSS Local Interrupt Controller
diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c
index 15f0407..9e540af 100644
--- a/drivers/irqchip/irq-pruss-intc.c
+++ b/drivers/irqchip/irq-pruss-intc.c
@@ -622,11 +622,20 @@  static const struct pruss_intc_match_data pruss_intc_data = {
 	.num_host_events = 10,
 };
 
+static const struct pruss_intc_match_data icssg_intc_data = {
+	.num_system_events = 160,
+	.num_host_events = 20,
+};
+
 static const struct of_device_id pruss_intc_of_match[] = {
 	{
 		.compatible = "ti,pruss-intc",
 		.data = &pruss_intc_data,
 	},
+	{
+		.compatible = "ti,icssg-intc",
+		.data = &icssg_intc_data,
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, pruss_intc_of_match);