diff mbox series

[v2,7/7] soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs

Message ID 1598020964-29877-8-git-send-email-grzegorz.jaszczyk@linaro.org
State New
Headers show
Series Add TI PRUSS platform driver | expand

Commit Message

Grzegorz Jaszczyk Aug. 21, 2020, 2:42 p.m. UTC
From: Suman Anna <s-anna@ti.com>

The K3 J721E family of SoCs have a revised version of the PRU-ICSS (ICSSG)
processor subsystem present on K3 AM65x SoCs. These SoCs contain typically
two ICSSG instances named ICSSG0 and ICSSG1. The two ICSSGs are identical
to each other for the most part with minor SoC integration differences and
capabilities. The ICSSG1 supports slightly enhanced features like SGMII
mode Ethernet, while the ICSSG0 instance is limited to MII mode only.

There is no change in the Interrupt Controller w.r.t AM65x. All other
integration aspects are very similar to the ICSSGs on AM65x SoCs.

The existing pruss platform driver has been updated to support these new
ICSSG instances through new J721E specific compatibles.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
---
v1->v2:
 - New patch which was not present in v1.
---
 drivers/soc/ti/pruss.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index ccc9783..37df543 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -164,6 +164,7 @@  static const struct of_device_id pruss_of_match[] = {
 	{ .compatible = "ti,am5728-pruss" },
 	{ .compatible = "ti,k2g-pruss" },
 	{ .compatible = "ti,am654-icssg" },
+	{ .compatible = "ti,j721e-icssg" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pruss_of_match);