diff mbox series

[v3,01/12] Documentation: dt: wireless: update wl1251 for sdio

Message ID 17b12e91c878dcb74160e3df5f88bc8a9e3f7fce.1573122644.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again | expand

Commit Message

H. Nikolaus Schaller Nov. 7, 2019, 10:30 a.m. UTC
The standard method for sdio devices connected to
an sdio interface is to define them as a child node
like we can see with wlcore.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
---
 .../bindings/net/wireless/ti,wl1251.txt       | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Rob Herring (Arm) Nov. 13, 2019, 1:33 p.m. UTC | #1
On Thu,  7 Nov 2019 11:30:34 +0100, "H. Nikolaus Schaller" wrote:
> The standard method for sdio devices connected to
> an sdio interface is to define them as a child node
> like we can see with wlcore.
> 
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Acked-by: Kalle Valo <kvalo@codeaurora.org>
> ---
>  .../bindings/net/wireless/ti,wl1251.txt       | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Ulf Hansson Nov. 14, 2019, 2:11 p.m. UTC | #2
On Thu, 7 Nov 2019 at 11:32, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> The standard method for sdio devices connected to
> an sdio interface is to define them as a child node
> like we can see with wlcore.
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Acked-by: Kalle Valo <kvalo@codeaurora.org>
> ---
>  .../bindings/net/wireless/ti,wl1251.txt       | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
> index bb2fcde6f7ff..f38950560982 100644
> --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
> @@ -35,3 +35,29 @@ Examples:
>                 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
>         };
>  };
> +
> +&mmc3 {
> +       vmmc-supply = <&wlan_en>;
> +
> +       bus-width = <4>;
> +       non-removable;
> +       ti,non-removable;
> +       cap-power-off-card;
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc3_pins>;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       wlan: wifi@1 {
> +               compatible = "ti,wl1251";
> +
> +               reg = <1>;
> +
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;  /* GPIO_21 */
> +
> +               ti,wl1251-has-eeprom;
> +       };
> +};

One minor thing, the "ti,power-gpio" is not required anymore, as it's
not needed for the SDIO case for pandora.

Please move it to an option section.

Kind regards
Uffe
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index bb2fcde6f7ff..f38950560982 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -35,3 +35,29 @@  Examples:
 		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
 	};
 };
+
+&mmc3 {
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
+};