@@ -42,7 +42,6 @@ struct twlreg_info {
/* chip constraints on regulator behavior */
u16 min_mV;
- u16 max_mV;
/* used by regulator core */
struct regulator_desc desc;
@@ -262,6 +261,14 @@ static const u16 VDAC_VSEL_table[] = {
};
+static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int mV = info->table[index];
+
+ return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
+}
+
static int
twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
{
@@ -276,6 +283,8 @@ twl4030ldo_set_voltage(struct regulator_
continue;
uV = LDO_MV(mV) * 1000;
+ /* REVISIT for VAUX2, first match may not be best/lowest */
+
/* use the first in-range value */
if (min_uV <= uV && uV <= max_uV)
return twl4030reg_write(info, VREG_DEDICATED, vsel);
@@ -297,6 +306,8 @@ static int twl4030ldo_get_voltage(struct
}
static struct regulator_ops twl4030ldo_ops = {
+ .list_voltage = twl4030ldo_list_voltage,
+
.set_voltage = twl4030ldo_set_voltage,
.get_voltage = twl4030ldo_get_voltage,
@@ -314,6 +325,13 @@ static struct regulator_ops twl4030ldo_o
/*
* Fixed voltage LDOs don't have a VSEL field to update.
*/
+static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+
+ return info->min_mV * 1000;
+}
+
static int twl4030fixed_get_voltage(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@@ -322,6 +340,8 @@ static int twl4030fixed_get_voltage(stru
}
static struct regulator_ops twl4030fixed_ops = {
+ .list_voltage = twl4030fixed_list_voltage,
+
.get_voltage = twl4030fixed_get_voltage,
.enable = twl4030reg_enable,
@@ -343,6 +363,7 @@ static struct regulator_ops twl4030fixed
.desc = { \
.name = #label, \
.id = TWL4030_REG_##label, \
+ .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
.ops = &twl4030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -353,10 +374,10 @@ static struct regulator_ops twl4030fixed
.base = offset, \
.id = num, \
.min_mV = mVolts, \
- .max_mV = mVolts, \
.desc = { \
.name = #label, \
.id = TWL4030_REG_##label, \
+ .n_voltages = 1, \
.ops = &twl4030fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -402,14 +423,11 @@ static int twl4030reg_probe(struct platf
struct regulator_init_data *initdata;
struct regulation_constraints *c;
struct regulator_dev *rdev;
- int min_uV, max_uV;
for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) {
if (twl4030_regs[i].desc.id != pdev->id)
continue;
info = twl4030_regs + i;
- min_uV = info->min_mV * 1000;
- max_uV = info->max_mV * 1000;
break;
}
if (!info)
@@ -423,10 +441,6 @@ static int twl4030reg_probe(struct platf
* this driver and the chip itself can actually do.
*/
c = &initdata->constraints;
- if (!c->min_uV || c->min_uV < min_uV)
- c->min_uV = min_uV;
- if (!c->max_uV || c->max_uV > max_uV)
- c->max_uV = max_uV;
c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
@@ -471,36 +485,6 @@ static struct platform_driver twl4030reg
static int __init twl4030reg_init(void)
{
- unsigned i, j;
-
- /* determine min/max voltage constraints, taking into account
- * whether set_voltage() will use the "unsupported" settings
- */
- for (i = 0; i < ARRAY_SIZE(twl4030_regs); i++) {
- struct twlreg_info *info = twl4030_regs + i;
- const u16 *table;
-
- /* fixed-voltage regulators */
- if (!info->table_len)
- continue;
-
- /* LDO regulators: */
- for (j = 0, table = info->table;
- j < info->table_len;
- j++, table++) {
- u16 mV = *table;
-
- if (IS_UNSUP(mV))
- continue;
- mV = LDO_MV(mV);
-
- if (info->min_mV == 0 || info->min_mV > mV)
- info->min_mV = mV;
- if (info->max_mV < mV)
- info->max_mV = mV;
- }
- }
-
return platform_driver_register(&twl4030reg_driver);
}
subsys_initcall(twl4030reg_init);