diff mbox

onenand_init: Allow disabling sync read and write based on flags, v3

Message ID 20090504173315.GA5593@atomide.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Tony Lindgren May 4, 2009, 5:39 p.m. UTC 
* Adrian Hunter <adrian.hunter@nokia.com> [090504 01:27]:
> Tony Lindgren wrote:
>> * Tony Lindgren <tony@atomide.com> [090430 07:06]:
>>> * vimal singh <vimalsingh@ti.com> [090429 23:33]:
>>>> 'gpmc-onenand.c' is still confusing name. This is not going to used in
>>>> all boards anyway.
>>> Why do you think this cannot be used for all boards?
>>>
>>> The GPMC timings are totally based on the onenand chip features.
>>
>> And these two patches make omap3430sdp to work with the gpmc-onenand
>> code. Sync mode does not work, but it seems like it was never enabled
>> for sdp anyways.
>>
>> Similar patch should work for other boards too.
>>
>> Tony
>>
>
> This is not quite right.  OneNAND only allows 3 possibilities:
>
> 1. Async: call 'omap2_onenand_set_async_mode()'
>
> 2. Sync Read: call 'omap2_onenand_set_sync_mode()' but force 'sync_write' variable to be always zero
>
> 3. Sync Read and Sync Write: call 'omap2_onenand_set_sync_mode()' as now

Thanks. I take it that you mean that we need to leave out the sync write
option from the possible combinations. Here's the updated version, let
me know if you had something else in mind.

This patch also moves the cpu_is_24xx() test to the init.

Regards,

Tony
diff mbox

Patch

From 27f14d9d80b20bbc03b99927ce5f0d2e409ab890 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 30 Apr 2009 11:43:19 -0700
Subject: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v3

Allow disabling sync read and write based on flags

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
index e882e4b..74e7ea4 100644
--- a/arch/arm/mach-omap2/board-n800.c
+++ b/arch/arm/mach-omap2/board-n800.c
@@ -722,6 +722,7 @@  static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 26,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READ,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 7b1ee3d..55e8568 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -515,6 +515,7 @@  static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index fc79183..d243228 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -86,15 +86,18 @@  static void omap2_onenand_writew(unsigned short value, void __iomem *addr)
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
-			    int sync_write, int hf)
+				int sync_read, int sync_write, int hf)
 {
 	u32 reg;
 
 	reg = omap2_onenand_readw(onenand_base + ONENAND_REG_SYS_CFG1);
 	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
-		ONENAND_SYS_CFG1_SYNC_READ |
 		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
 	if (sync_write)
 		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
 	else
@@ -106,8 +109,9 @@  static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 	omap2_onenand_writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
-static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
-				       int freq)
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
 {
 	struct gpmc_timings t;
 	const int t_cer  = 15;
@@ -118,9 +122,17 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
 	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-	int err, ticks_cez, sync_write = 0, first_time = 0, hf = 0;
+	int err, ticks_cez, sync_read = 0, sync_write = 0, first_time = 0, hf = 0;
+	int cs = cfg->cs;
 	u32 reg;
 
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
 	if (!freq) {
 		/* Very first call freq is not known */
 		err = omap2_onenand_set_async_mode(cs, onenand_base);
@@ -160,8 +172,6 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 		t_ach   = 6;
 		t_aavdh = 6;
 		t_rdyo  = 9;
-		if (cpu_is_omap34xx())
-			sync_write = 1;
 		break;
 	case 66:
 		min_gpmc_clk_period = 15; /* 66 MHz */
@@ -171,8 +181,6 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 		t_ach   = 6;
 		t_aavdh = 6;
 		t_rdyo  = 11;
-		if (cpu_is_omap34xx())
-			sync_write = 1;
 		break;
 	default:
 		min_gpmc_clk_period = 18; /* 54 MHz */
@@ -182,6 +190,7 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 		t_ach   = 9;
 		t_aavdh = 7;
 		t_rdyo  = 15;
+		sync_write = 0;
 		break;
 	}
 
@@ -198,7 +207,8 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 		latency = 4;
 
 	if (first_time)
-		set_onenand_cfg(onenand_base, latency, sync_write, hf);
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
 
 	if (div == 1) {
 		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -272,7 +282,7 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
 			  GPMC_CONFIG1_WRAPBURST_SUPP |
 			  GPMC_CONFIG1_READMULTIPLE_SUPP |
-			  GPMC_CONFIG1_READTYPE_SYNC |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
 			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
 			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
 			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
@@ -288,7 +298,7 @@  static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
 	if (err)
 		return err;
 
-	set_onenand_cfg(onenand_base, latency, sync_write, hf);
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
 
 	return 0;
 }
@@ -298,7 +308,7 @@  static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
 	struct device *dev = &gpmc_onenand_device.dev;
 
 	/* Set sync timings in GPMC */
-	if (omap2_onenand_set_sync_mode(gpmc_onenand_data->cs, onenand_base,
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
 			freq) < 0) {
 		dev_err(dev, "Unable to set synchronous mode\n");
 		return -EINVAL;
@@ -313,6 +323,13 @@  void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
 	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
 
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
 	if (platform_device_register(&gpmc_onenand_device) < 0) {
 		printk(KERN_ERR "Unable to register OneNAND device\n");
 		return;
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 2a391fa..bb66d0b 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -14,6 +14,9 @@ 
 
 #ifndef __ASM_ARCH_OMAP_ONENAND_H__
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -21,6 +24,7 @@  struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
 int omap2_onenand_rephase(void);