| Message ID | 20090519211756.GH19742@atomide.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
> -----Original Message----- > From: Tony Lindgren [mailto:tony@atomide.com] > Sent: Wednesday, May 20, 2009 2:48 AM > To: Shilimkar, Santosh > Cc: linux-arm-kernel@lists.arm.linux.org.uk; > linux-omap@vger.kernel.org > Subject: Re: [PATCH 2/7] OMAP4: Create board support for > OMAP_4430SDP, v3 > > Hi, > > I rebased these patches on top of the for-next branch in linux-omap > tree, some comments and the updated patch below. > > * Santosh Shilimkar <santosh.shilimkar@ti.com> [090519 06:32]: > > (patch is rebased on 2.6.30-rc6. The older version was > based on 2.6.30-rc2) > > > > This patch creates the bare minimal board files to support > > OMAP_4430SDP. Additinaly new omap44xx.h is created which contains > > the base addresses for OMAP4430. File omap34xx.h is adapted to avoid > > multiple definitions of common omap base address definitions. > > > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > > --- > > arch/arm/mach-omap2/board-4430sdp.c | 94 > ++++++++++++++++++++++++++++ > > arch/arm/plat-omap/include/mach/hardware.h | 1 + > > arch/arm/plat-omap/include/mach/omap34xx.h | 10 ++-- > > arch/arm/plat-omap/include/mach/omap44xx.h | 61 > ++++++++++++++++++ > > 4 files changed, 161 insertions(+), 5 deletions(-) > > create mode 100644 arch/arm/mach-omap2/board-4430sdp.c > > create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h > > In general, considering this whole series is less than 750 > lines of changes, > I suggest collapsing them into following three patches: > > 1. Add minimal support for omap4 > > This patch would be everything in your series, except what's > in patches > two and three below. > > 2. Add support for 4430 SDP > > This patch would be just the board-4430sdp.c the changes to > mach-omap2/Makefile > and mach-omap2/Kconfig. > > 3. Add defconfig for 4430 SDP > > This patch would just contain the defconfig. > > To make things easy, I rebased two of your patches on top of > the for-next > branch in the linux-omap tree. Some comments and the updated > patch below. > > Please do any more changes on top of this version so we can get things > queued up nicely for Russell. Cool :) I am fine with merging the patches but the clock stub patch should be kept separate. This patch should be reverted once clkdev is ready and in that case it would be easy to remove it. Series would be like this 1. Add minimal support for omap4 2. Add support for 4430 SDP 3. Clock stubs 4. Add defconfig for 4430 SDP I will rebase on 'for-next branch' on linux-omap and test it. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Shilimkar, Santosh <santosh.shilimkar@ti.com> [090519 21:57]: > > -----Original Message----- > > From: Tony Lindgren [mailto:tony@atomide.com] > > Sent: Wednesday, May 20, 2009 2:48 AM > > To: Shilimkar, Santosh > > Cc: linux-arm-kernel@lists.arm.linux.org.uk; > > linux-omap@vger.kernel.org > > Subject: Re: [PATCH 2/7] OMAP4: Create board support for > > OMAP_4430SDP, v3 > > > > Hi, > > > > I rebased these patches on top of the for-next branch in linux-omap > > tree, some comments and the updated patch below. > > > > * Santosh Shilimkar <santosh.shilimkar@ti.com> [090519 06:32]: > > > (patch is rebased on 2.6.30-rc6. The older version was > > based on 2.6.30-rc2) > > > > > > This patch creates the bare minimal board files to support > > > OMAP_4430SDP. Additinaly new omap44xx.h is created which contains > > > the base addresses for OMAP4430. File omap34xx.h is adapted to avoid > > > multiple definitions of common omap base address definitions. > > > > > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > > > --- > > > arch/arm/mach-omap2/board-4430sdp.c | 94 > > ++++++++++++++++++++++++++++ > > > arch/arm/plat-omap/include/mach/hardware.h | 1 + > > > arch/arm/plat-omap/include/mach/omap34xx.h | 10 ++-- > > > arch/arm/plat-omap/include/mach/omap44xx.h | 61 > > ++++++++++++++++++ > > > 4 files changed, 161 insertions(+), 5 deletions(-) > > > create mode 100644 arch/arm/mach-omap2/board-4430sdp.c > > > create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h > > > > In general, considering this whole series is less than 750 > > lines of changes, > > I suggest collapsing them into following three patches: > > > > 1. Add minimal support for omap4 > > > > This patch would be everything in your series, except what's > > in patches > > two and three below. > > > > 2. Add support for 4430 SDP > > > > This patch would be just the board-4430sdp.c the changes to > > mach-omap2/Makefile > > and mach-omap2/Kconfig. > > > > 3. Add defconfig for 4430 SDP > > > > This patch would just contain the defconfig. > > > > To make things easy, I rebased two of your patches on top of > > the for-next > > branch in the linux-omap tree. Some comments and the updated > > patch below. > > > > Please do any more changes on top of this version so we can get things > > queued up nicely for Russell. > > Cool :) > I am fine with merging the patches but the clock stub patch should be kept separate. This patch should be reverted once clkdev is ready and in that case it would be easy to remove it. > Series would be like this > 1. Add minimal support for omap4 > 2. Add support for 4430 SDP > 3. Clock stubs > 4. Add defconfig for 4430 SDP > > I will rebase on 'for-next branch' on linux-omap and test it. OK, sounds good to me! Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From b053e3239892fa088339db2eb0f33dbaa803f61d Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar <santosh.shilimkar@ti.com> Date: Tue, 19 May 2009 13:51:45 -0700 Subject: [PATCH] ARM: OMAP4: Create board support for OMAP_4430SDP, v3 This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c new file mode 100644 index 0000000..57e477b --- /dev/null +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -0,0 +1,94 @@ +/* + * Board support file for OMAP4430 SDP. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Based on mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/common.h> +#include <mach/control.h> +#include <mach/timer-gp.h> +#include <asm/hardware/gic.h> + +static struct platform_device sdp4430_lcd_device = { + .name = "sdp4430_lcd", + .id = -1, +}; + +static struct platform_device *sdp4430_devices[] __initdata = { + &sdp4430_lcd_device, +}; + +static struct omap_uart_config sdp4430_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), +}; + +static struct omap_lcd_config sdp4430_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel sdp4430_config[] __initdata = { + { OMAP_TAG_UART, &sdp4430_uart_config }, + { OMAP_TAG_LCD, &sdp4430_lcd_config }, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); +} + +static void __init omap_4430sdp_init_irq(void) +{ + omap2_init_common_hw(NULL); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(1); +#endif + gic_init_irq(); + omap_gpio_init(); +} + + +static void __init omap_4430sdp_init(void) +{ + platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); + omap_serial_init(); +} + +static void __init omap_4430sdp_map_io(void) +{ + omap2_set_globals_443x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, + .init_machine = omap_4430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 70b68ef..febcacf 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -217,6 +217,15 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs) #define omap34xx_32k_read NULL #endif +#ifdef CONFIG_ARCH_OMAP4 +static cycle_t omap44xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10); +} +#else +#define omap44xx_32k_read NULL +#endif + /* * Kernel assumes that sched_clock can be called early but may not have * things ready yet. @@ -264,6 +273,8 @@ static int __init omap_init_clocksource_32k(void) clocksource_32k.read = omap2430_32k_read; else if (cpu_is_omap34xx()) clocksource_32k.read = omap34xx_32k_read; + else if (cpu_is_omap44xx()) + clocksource_32k.read = omap44xx_32k_read; else return -ENODEV; diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 3dc423e..26c1fbf 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -285,5 +285,6 @@ #include "omap16xx.h" #include "omap24xx.h" #include "omap34xx.h" +#include "omap44xx.h" #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h index f8d186a..9bab0a8 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/mach/omap34xx.h @@ -3,7 +3,7 @@ * * This file contains the processor specific definitions of the TI OMAP34XX. * - * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007-2009 Texas Instruments. * Copyright (C) 2007 Nokia Corporation. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h new file mode 100644 index 0000000..15dec7f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -0,0 +1,46 @@ +/*: + * Address mappings and base address for OMAP4 interconnects + * and peripherals. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_OMAP44XX_H +#define __ASM_ARCH_OMAP44XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_44XX_BASE 0x4a000000 +#define L4_WK_44XX_BASE 0x4a300000 +#define L4_PER_44XX_BASE 0x48000000 +#define L4_EMU_44XX_BASE 0x54000000 +#define L3_44XX_BASE 0x44000000 +#define OMAP4430_32KSYNCT_BASE 0x4a304000 +#define OMAP4430_CM_BASE 0x4a004000 +#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP44XX_GPMC_BASE 0x50000000 +#define OMAP443X_SCM_BASE 0x4a002000 +#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP44XX_IC_BASE 0x48200000 +#define OMAP44XX_IVA_INTC_BASE 0x40000000 +#define IRQ_SIR_IRQ 0x0040 +#define OMAP44XX_GIC_DIST_BASE 0x48241000 +#define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define OMAP44XX_SCU_BASE 0x48240000 +#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE) +#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 +#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) +#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 +#define OMAP44XX_WKUPGEN_BASE 0x48281000 +#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) + +#endif /* __ASM_ARCH_OMAP44XX_H */ +