From patchwork Mon May 25 17:53:35 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 25866 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n4PHpO2k031429 for ; Mon, 25 May 2009 17:53:48 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751747AbZEYRxo (ORCPT ); Mon, 25 May 2009 13:53:44 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752099AbZEYRxo (ORCPT ); Mon, 25 May 2009 13:53:44 -0400 Received: from mho-01-ewr.mailhop.org ([204.13.248.71]:52639 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751747AbZEYRxo (ORCPT ); Mon, 25 May 2009 13:53:44 -0400 Received: from c-67-160-239-110.hsd1.ca.comcast.net ([67.160.239.110] helo=[127.0.0.1]) by mho-01-ewr.mailhop.org with esmtpa (Exim 4.68) (envelope-from ) id 1M8eMr-000O1x-49; Mon, 25 May 2009 17:53:45 +0000 X-Mail-Handler: MailHop Outbound by DynDNS X-Originating-IP: 67.160.239.110 X-Report-Abuse-To: abuse@dyndns.com (see http://www.dyndns.com/services/mailhop/outbound_abuse.html for abuse reporting information) X-MHO-User: U2FsdGVkX1+uw898I166CYJrFcP1Aap4 Subject: [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board To: linux-arm-kernel@lists.arm.linux.org.uk From: Tony Lindgren Cc: Mikkel Christensen , Kevin Hilman , Vikram Pandita , linux-omap@vger.kernel.org Date: Mon, 25 May 2009 10:53:35 -0700 Message-ID: <20090525175335.19679.3398.stgit@localhost> In-Reply-To: <20090525174517.19679.18805.stgit@localhost> References: <20090525174517.19679.18805.stgit@localhost> User-Agent: StGit/0.14.3.347.g594a MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Vikram Pandita This patch creates the minimal OMAP3 Zoom2 board support. Signed-off-by: Mikkel Christensen Signed-off-by: Vikram Pandita Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-zoom-debugboard.c | 160 +++++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom2.c | 110 +++++++++++++++++++ 4 files changed, 277 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-debugboard.c create mode 100644 arch/arm/mach-omap2/board-zoom2.c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 64ab386..f6cf903 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -67,3 +67,7 @@ config MACH_OMAP_3430SDP config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_ZOOM2 + bool "OMAP3 Zoom2 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e4f6f61..4cdb318 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -53,7 +53,9 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + mmc-twl4030.o \ + board-zoom-debugboard.o # Platform specific device init code ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c new file mode 100644 index 0000000..91f07c1 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#define ZOOM2_SMSC911X_CS 7 +#define ZOOM2_SMSC911X_GPIO 158 +#define ZOOM2_QUADUART_CS 3 +#define ZOOM2_QUADUART_GPIO 102 +#define QUART_CLK 1843200 +#define DEBUG_BASE 0x08000000 +#define ZOOM2_ETHR_START DEBUG_BASE + +static struct resource zoom2_smsc911x_resources[] = { + [0] = { + .start = ZOOM2_ETHR_START, + .end = ZOOM2_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config zoom2_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device zoom2_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), + .resource = zoom2_smsc911x_resources, + .dev = { + .platform_data = &zoom2_smsc911x_config, + }, +}; + +static inline void __init zoom2_init_smsc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = ZOOM2_SMSC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + return; + } + + zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + + eth_gpio = ZOOM2_SMSC911X_GPIO; + + zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", + eth_gpio); + return; + } + gpio_direction_input(eth_gpio); +} + +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = 0x10000000, + .irq = OMAP_GPIO_IRQ(102), + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = QUART_CLK, + }, { + .flags = 0 + } +}; + +static struct platform_device zoom2_debugboard_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static inline void __init zoom2_init_quaduart(void) +{ + int quart_cs; + unsigned long cs_mem_base; + int quart_gpio = 0; + + quart_cs = ZOOM2_QUADUART_CS; + + if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem" + "for Quad UART(TL16CP754C)\n"); + return; + } + + quart_gpio = ZOOM2_QUADUART_GPIO; + + if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", + quart_gpio); + return; + } + gpio_direction_input(quart_gpio); +} + +static inline int omap_zoom2_debugboard_detect(void) +{ + int debug_board_detect = 0; + + debug_board_detect = ZOOM2_SMSC911X_GPIO; + + if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + "board detect\n", debug_board_detect); + return 0; + } + gpio_direction_input(debug_board_detect); + + if (!gpio_get_value(debug_board_detect)) { + gpio_free(debug_board_detect); + return 0; + } + return 1; +} + +static struct platform_device *zoom2_devices[] __initdata = { + &zoom2_smsc911x_device, + &zoom2_debugboard_serial_device, +}; + +int __init omap_zoom2_debugboard_init(void) +{ + if (!omap_zoom2_debugboard_detect()) + return 0; + + zoom2_init_smsc911x(); + zoom2_init_quaduart(); + return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c new file mode 100644 index 0000000..d4cd7ff --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen + * + * Modified from mach-omap2/board-ldp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "mmc-twl4030.h" + +static void __init omap_zoom2_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config zoom2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel zoom2_config[] __initdata = { + { OMAP_TAG_UART, &zoom2_uart_config }, +}; + +static struct twl4030_gpio_platform_data zoom2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, +}; + +static struct twl4030_platform_data zoom2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &zoom2_gpio_data, +}; + +static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom2_twldata, + }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, + ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct twl4030_hsmmc_info mmc[] __initdata = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +extern int __init omap_zoom2_debugboard_init(void); + +static void __init omap_zoom2_init(void) +{ + omap_i2c_init(); + omap_board_config = zoom2_config; + omap_board_config_size = ARRAY_SIZE(zoom2_config); + omap_serial_init(); + omap_zoom2_debugboard_init(); + twl4030_mmc_init(mmc); + usb_musb_init(); +} + +static void __init omap_zoom2_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, + .init_machine = omap_zoom2_init, + .timer = &omap_timer, +MACHINE_END