diff mbox

omap: Fix DEBUG_LL code for p2v changes (Re: Fwd: [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching)

Message ID 20110204011538.GN3322@atomide.com (mailing list archive)
State Accepted, archived
Delegated to: Tony Lindgren
Headers show

Commit Message

Tony Lindgren Feb. 4, 2011, 1:15 a.m. UTC 
None
diff mbox

Patch

From: Tony Lindgren <tony@atomide.com>
Date: Thu, 3 Feb 2011 15:17:44 -0800
Subject: [PATCH] omap: Fix DEBUG_LL code for p2v changes

These are needed for CONFIG_ARM_PATCH_PHYS_VIRT to work.

Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -17,6 +17,9 @@ 
 
 #include <plat/serial.h>
 
+#define omap_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define omap_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
 		.pushsection .data
 omap_uart_phys:	.word	0x0
 omap_uart_virt:	.word	0x0
@@ -33,7 +36,7 @@  omap_uart_virt:	.word	0x0
 		/* Use omap_uart_phys/virt if already configured */
 9:		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldreq	\rp, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
 		ldrne	\rp, =omap_uart_phys	@ MMU enabled
 		add	\rv, \rp, #4		@ omap_uart_virt
 		ldr	\rp, [\rp, #0]
@@ -46,7 +49,7 @@  omap_uart_virt:	.word	0x0
 		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
 		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
-		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldrne	\rp, =omap_uart_p2v(OMAP_UART_INFO)	@ MMU enabled
 		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
@@ -73,7 +76,7 @@  omap_uart_virt:	.word	0x0
 98:		add	\rp, \rp, #0xff000000	@ phys base
 		mrc	p15, 0, \rv, c1, c0
 		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
 		ldrne	\rv, =omap_uart_phys	@ MMU enabled
 		str	\rp, [\rv, #0]
 		sub	\rp, \rp, #0xff000000	@ phys base
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -19,6 +19,9 @@ 
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 
+#define omap_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define omap_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
 		.pushsection .data
 omap_uart_phys:	.word	0
 omap_uart_virt:	.word	0
@@ -36,7 +39,7 @@  omap_uart_lsr:	.word	0
 		/* Use omap_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldreq	\rp, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
 		ldrne	\rp, =omap_uart_phys	@ MMU enabled
 		add	\rv, \rp, #4		@ omap_uart_virt
 		ldr	\rp, [\rp, #0]
@@ -49,7 +52,7 @@  omap_uart_lsr:	.word	0
 		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
 		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
-		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldrne	\rp, =omap_uart_p2v(OMAP_UART_INFO)	@ MMU enabled
 		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
@@ -94,7 +97,7 @@  omap_uart_lsr:	.word	0
 95:		ldr	\rp, =ZOOM_UART_BASE
 		mrc	p15, 0, \rv, c1, c0
 		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
 		ldrne	\rv, =omap_uart_phys	@ MMU enabled
 		str	\rp, [\rv, #0]
 		ldr	\rp, =ZOOM_UART_VIRT
@@ -109,7 +112,7 @@  omap_uart_lsr:	.word	0
 98:		add	\rp, \rp, #0x48000000	@ phys base
 		mrc	p15, 0, \rv, c1, c0
 		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
 		ldrne	\rv, =omap_uart_phys	@ MMU enabled
 		str	\rp, [\rv, #0]
 		sub	\rp, \rp, #0x48000000	@ phys base
@@ -131,7 +134,7 @@  omap_uart_lsr:	.word	0
 		.macro	busyuart,rd,rx
 1001:		mrc	p15, 0, \rd, c1, c0
 		tst	\rd, #1			@ MMU enabled?
-		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)	@ MMU not enabled
+		ldreq	\rd, =omap_uart_v2p(omap_uart_lsr)	@ MMU disabled
 		ldrne	\rd, =omap_uart_lsr	@ MMU enabled
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]