diff mbox

[06/13,v2] clocksource: add common mmio clocksource

Message ID 20110511083552.GF15120@n2100.arm.linux.org.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Russell King - ARM Linux May 11, 2011, 8:35 a.m. UTC
Add a generic mmio clocksource, covering both 32-bit and 16-bit register
access sizes, for up or down counters.  This can be used to easily
create clocksources for simple counter-based implementations.

Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Colin Cross <ccross@android.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Erik Gilling <konkers@android.com>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: linux-omap@vger.kernel.org
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

This is the version with cs->reg initialized.

 drivers/Kconfig              |    3 ++
 drivers/clocksource/Kconfig  |    2 +
 drivers/clocksource/Makefile |    1 +
 drivers/clocksource/mmio.c   |   73 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clocksource.h  |    8 ++++
 5 files changed, 87 insertions(+), 0 deletions(-)
 create mode 100644 drivers/clocksource/Kconfig
 create mode 100644 drivers/clocksource/mmio.c
diff mbox

Patch

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d1..557a469 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -119,4 +119,7 @@  source "drivers/platform/Kconfig"
 source "drivers/clk/Kconfig"
 
 source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
 endmenu
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 0000000..47f37b1
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,2 @@ 
+config CLKSRC_MMIO
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece..9b2ba29 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@  obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC)	+= cs5535-clockevt.o
 obj-$(CONFIG_SH_TIMER_CMT)	+= sh_cmt.o
 obj-$(CONFIG_SH_TIMER_MTU2)	+= sh_mtu2.o
 obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
+obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
new file mode 100644
index 0000000..c0e2512
--- /dev/null
+++ b/drivers/clocksource/mmio.c
@@ -0,0 +1,73 @@ 
+/*
+ * Generic MMIO clocksource support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+struct clocksource_mmio {
+	void __iomem *reg;
+	struct clocksource clksrc;
+};
+
+static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
+{
+	return container_of(c, struct clocksource_mmio, clksrc);
+}
+
+cycle_t clocksource_mmio_readl_up(struct clocksource *c)
+{
+	return readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readl_down(struct clocksource *c)
+{
+	return ~readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_up(struct clocksource *c)
+{
+	return readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_down(struct clocksource *c)
+{
+	return ~(unsigned)readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+/**
+ * clocksource_mmio_init - Initialize a simple mmio based clocksource
+ * @base:	Virtual address of the clock readout register
+ * @name:	Name of the clocksource
+ * @hz:		Frequency of the clocksource in Hz
+ * @rating:	Rating of the clocksource
+ * @bits:	Number of valid bits
+ * @read:	One of clocksource_mmio_read*() above
+ */
+int __init clocksource_mmio_init(void __iomem *base, const char *name,
+	unsigned long hz, int rating, unsigned bits,
+	cycle_t (*read)(struct clocksource *))
+{
+	struct clocksource_mmio *cs;
+
+	if (bits > 32 || bits < 16)
+		return -EINVAL;
+
+	cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
+	cs->reg = base;
+	cs->clksrc.name = name;
+	cs->clksrc.rating = rating;
+	cs->clksrc.read = read;
+	cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	return clocksource_register_hz(&cs->clksrc, hz);
+}
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 94c1f38..a3558fd 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -341,4 +341,12 @@  static inline void update_vsyscall_tz(void)
 
 extern void timekeeping_notify(struct clocksource *clock);
 
+extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
+
+extern int clocksource_mmio_init(void __iomem *, const char *,
+	unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
+
 #endif /* _LINUX_CLOCKSOURCE_H */